Inspection, Testing & Audit Tenders in Jharkhand

Cleaning, filling, painting and calibration of 2000 nos. (20 kg each) of C.I. test weight for verification and annual stamping of 120Te rail weighbridge in October quarter 2023 under Jarangdih Colliery.

LTE for Appointment of Conjoint Surveyor for testing and calibration of weighscale, supervision of weighment, sampling, sample preparation and moisture determination of 508 WMT Copper Revert of ICC Origin at ICC.

Loading, unloading and placing of Test weights 20 Kg C.I each at the weighbridge platform during weights verification Calibration of weighbridge no- 1 and 2 installed under PEOCP. For 12 month

REPARING AND PAINTING OF CI TEST WEIGHT FOR STAMPING OF 60T STATIC ROAD WEIGH BRIDGES AT SIJUA SIDING WEIGH BRIDGE UNDER KATRAS AREA(INCLUDING CALIBRATION OF THE WEIGHBRIDGE WITH 1000 NOS.REPAIRED

For replacement work of old damaged mounting sets, foundation plates, PCB of junction box, 02 nos. of load cells including testing, adjusting and calibration of road weighbridge at Sendra Bansjora Colliery

Repairing, cleaning and painting of 2334 nos of 20KG each test weights for calibration and verification of 140T Electronic In-motion Rail WB installed at Konar Siding under AKKOCP, BnK Area

Repairing, verification and stamping of CI test weights for calibration testing and stamping of 02 nos. im motion weighbridges at shivpur siding line no. 01 and 04, CCL under Amrapali OCP

Custom Bid for Services - Calibration of Scope TM make Circuit Breaker Analyser consisting of HISAC Ultima DCRM Ultima and SCOT MUT4 timers at CRITM DVC Maithon on OEM Basis through GEM

Supply of " Snap Gauge range (175-200) mm and least count 0.001mm with digital dial indicator ". Make mitutoya or Aerospace. Calibration certificate of meter from NABL approved laboratory will be subm

Supply of " Snap Gauge range (100-125) mm and least count 0.001mm with digital dial indicator ". Make mitutoyo or Aerospace. Calibration certificate of meter from NABL approved laboratory to be submit

Digital Dial Snap Gauge with least Count 0.001 mm Range: - 300-325 mm. Detail Specification as per Annexure attached. Note: The Firm shall submit NABL Calibration Certificate along with the supply.

Master setting gauge for dial snap gauge. Size (O.D.) 144.000mm (+/- 0.002). Thickness-40mm. Material: Cold work tool steel to IS:3748/90, hardness-50/55 HRC. Supply with calibration certificate issue

DIGITAL BORE GAUGE WITH DIGITAL DIAL GAUGE MEASURING RANGE 160 - 250 MM Least Count -0.001 MM with calibration certificate from lab traceable to NABL & warranty certificate. Make- Mitutoyo- Japan or T

Custom Bid for Services - contract for testing of Environmental parameters in respect of Ambient Air Quality Stack emission Effluent discharge Noise level measurement Concentration of Ground water testing Leachate Analysis of water around ash pond ... Products/ Material Testing of

Cleaning, Testing and calibration of CI Weights (20kg each) for Annual verification and stamping of 02 nos. road 50MT ASEC and LEO make road weighbridges installed at Karma Project under Kuju Area.

Repairing and calibration of Area laboratory equipments and AMC for one year including four preventive visits at an interval of three months and recalibration after repair job under GM Unit, BnK Area

Repairing, overhauling and calibration of Fuel Injection Pump and 04 nos. nozzle and FIP cracked portion welding, grinding and fitting in TIL Crane RT740B Sl. No. 407965 at Tetulmari OCP, Sijua Area

Customized AMC/CMC for Pre-owned Products - AMC for Servicing Maintenance and Calibration of 60 Ton RWB installed at MSB Plant; As per ATC; Annual Maintenance Contract (AMC); As per ATC; No

Loading, unloading and placing of test weights (20Kg C. I. each) at the weighbridge platform for calibration of weighbridge for the period of one year of different weighbridges installed under Kedla Washery.

PORTABLE ESD WRIST STRAP TESTER OPERATING ON 9V BATTERY WITH CALIBRATION CERTIFICATE TRACEBLE TO NIST STANDARDS SIMILAR TO DESCO MODEL NO. 19240 OR EQUIVALENT. TEST VOLTAGE -4V DC AND TEST LIMITS 750

GAUGE FOR TOP CENTRE PIVOT FITTED IN CASNUB BOGIES . GAUGE SPHERECIAL TYPE As per RDSO Drawing no. WD-25094-S/2 SUPPLY WITH CALIBRATION CERTIFICATE ISSUED FROM NABL APPROVED LAB WITH TRECEABILITY.

Calibration Services - Cleaning testing repairing and adjusting of CI test weights of 20kg each for 100 Te electronic road weighbridges no 02 Make TYCOON SlNo 2304091, Model BNWB installed near CHP Bunker for annual stamping and 50 Te electronic ro..

Calibration Services - Annual Verification and Stamping of 60 MT Road Weighbridge at Mosabani Plant for the year 2026; As per ATC; As per ATC; Mosabani Concentrator Plant, Hindustan Copper Limited, Indian Copper Complex, At Po- Mosabani, Dist-East Si..

Custom Bid for Services - Inspection Testing Calibration Test Certificate of Material Handling Equipments Pressure Vessels Etc at GRSE DEP Ranchi Similar Category Testing Service for On-Board/Commissioned Equipment/Instrument related to Plant

Repairing/painting of 1250 no of CI test weight for calibration of JRD PF1 WB1 with necessary replacement of A/D and CPU card of digitizer and junction box at AKKOCP, BnK Area

Repairing/servicing of engine, calibration of FIP and Nozzle, Radiator assly and self starter , wiring repairing etc of 100KVA , KOEL make water cooled 06 cylinder diesel engine installed at GM Unit Kuju Area.

Dismantling installation commissionin testing and calibration of 60MT electronic road weighbridge by required spares along with conduiting of load cell cable by GI pipe and GI flexible at Rajhara colliery under Rajhara Area

Dial bore gauge of size 50 to 150 mm with dial indicator, resolution 0.001 mm, Accuracy +/- 2 micro meter. Make- Mitutoyo, Baker, Starrett or Facom only. Material to be supplied with calibration test

OPEN e-TENDER IN TWO BID SYSTEM FOR SERVICE OF CONSULTANT (COMPETENT PERSON) FOR TESTING OF VARIOUS EQUIPMENTS AND STABILITY TEST OF BUILDINGS AND STRUCTURES, PREPARATION OF ONSITE EMERGENCY PLAN AND SAFETY AUDIT

Handling shifting of 20 Te C.I. Test weight ( 20 Kg.) each from different weigh bridge to Road weigh bridge no. 01 and 10 for calibration during stamping by LMO Chatra under CHP CPP Piparwar

Cleaning repairing filling and calibration and painting of 3000 nos. 20 kg each of C.I test weight for verification and stamping 60 te new road dispatch weigh bridge is being installed at Jarangdih Colliery.

Cleaning, Testing and Calibration of 4000 Nos test weight for annual verification and stamping of 02 nos road weighbridge and 01 no Rail weighbridge of Kuju New Siding of Topa Project under Kuju Area.

DC Voltmeter, 0-50V, Size - 2.5 inch X 2.5 inch. For use of DEMU Electrical Power Cars. (GC & CALIBRATION TEST CERTIFICATE TO BE SUBMITTED AT THE TIME OF DELIVERY). Acceptable Make - Surdhi/Yokins/Aut

Custom Bid for Services - Refilling of Calibration Gas Cylinders required for HURL Sindri Laboratory Instruments Similar Category Refilling of Industrial Gases in Cylinders Cylinder Maintenance and Handling Service Refilling of Medical Gases in Cylinders

Selection of Laboratories for Testing of Products/Material - Copper Concentrate; testing and calibration of weighscale supervision of weighment sampling sample preparation and moisture determination of Copper Concentrate of ICC Origin at ICC; Tonn; C..

The services are required for testing of various engineering equipments stability test of buildings and structures and issue certificates preparation certification and submission of onsite emergency plan and safety audit under Jharkhand factory rule

Custom Bid for Services - Annual Rate Contract for maintenance servicing and calibration of Metrohm make TAN Analyser and Karl Fischer Coulometer for Chemical laboratory KTPS for two years Similar Category Repair, Maintenance and Installation of Plant Systems/Equipments

Cleaning, Painting, repairing and necessary Rectification of 20 kg C I test weight for Periodical Verification, Testing, calibration and stamping of 140 te In rail motion and road weighbridge installed at Konar Exp, BnK Area

Testing and Calibration of Switchgears protective relays and measuring equipments from NABL accredited lab installed at 22.5MVA, 33kV/11-3.3kV Old Sub-station and 15MVA, 33kV/6.6kV New Sub-station of KDH OCP, NK Area

Repairing of cabin, denting, LHS gate lock, both sides window glass sliding problem, overhauling and calibration of FIP pump and nozzle fitting in TMB tipper truk Reg. No. BR17G 0548 at Nichitpur OCP, Sijua Area

BSO ENGG Fabrication, Erection, Welding, Testing, Calibration, Painting and Commissioning of 1x 11260 KL, 32 M dia X 16 M Ht, IFR MS Tank with allied works at Khunti Terminal, Jharkhand under Bihar State Office.

Selection of Laboratories for Testing of Products/Material - DETAILED TERMS AND CONDITIONS ARE GIVEN BELOW QUANTITY The Successful bidder shall be appointed as Conjoint Surveyor for testing and calibration of weighscale supervision of weighment sam..

AMC for repairing, painting, calibration, adjustment and stamping of CI test weight for all the four nos. of In-motion Rail and Static Road weighbridges of Giridih Area, CCL for FY 2025-26 and 2026-27.

Repairing, filling and calibration and painting of 850 Nos. (20 Kg each) of C.I Test weight for verification and stamping of 50Te Road Weighbridge of zero point at GVP Phase-II OCP (Due on October 2025)

Custom Bid for Services - Handling shifting of 25 Te CI test weights 20 kg each from different weigh bridge to Road weigh bridge no 1 and 2 during calibration verification and stamping under CHPCPP Piparwar area

Custom Bid for Services - One time repairing and calibration work of 5 kV digital Insulation Resistance Tester model no S1568 Sl No101427321 of make megger under GOMDIV DVC Putki from OESOEM through custom bid in GeM

One set of Gauges, consisting of 02 (two) type of items as follows: Item No. (i) Dial Snap Gauge Range 300-325 mm with Digital Dial Least Count 0.001mm along with NABL Calibration Certificate; Item No

Custom Bid for Services - Annual Rate Contract for the maintenance servicing and calibration of One (01) No Portable Particle Counter machine Model LPA3 Make M/s MPFILTRI for Chemical laboratory, KTPS for two (02) years Similar Category Operation and Maintenance Power House/Power Plant

Maintenance , repairing and reconditioning of 02 Nos. NGR 3.3 KV Automation make with control panel and proper earth arrangement, termination with cables and testing and calibration at site of main substation of Topa Project under Kuju Area

Loading, unloading and placing of test weights (20 Kg C.I. each) at the weigh bridge platform for calibration/verification of weighbridge and cleaning the Load Cell area (where load cells wire laid/dressed and load cell mounted)