Inspection, Testing & Audit Tenders in Jharkhand

Spares repairing and calibration services of Honewell make Multigas Detector Gas Alert Microclip XT of Bhowra North Colliery.

Repairing and calibration of 01 sets of FIP and Nozzles suitable for BSA6D170 engine applicable to BE1000 shovel

Repairing/rectification, painting ,calibration and stamping after cleaning of C.I test weights 20 kg each at Govindpur Project.

Testing and calibration of HT Equipments installed at New and Old Sub-station under KDH OCP, NK Area.

Testing and calibration of equipments at mines sub-station and pumping station of Pundi Project under Kuju Area.

Repair, Testing and Calibration of RPD Flow Meter installed in Check Meter at City Gate Station, Budhibinor (Bokaro)

Custom Bid for Services - Repair and Calibration of Doble make relay test kitModelF6150SVSr No 121607350 of CRITM Department

Custom Bid for Services - Supply installation stamping calibration AMC of 1 set 2 nos RWB for PBNW CMP

calibration and alignment of unit in unit proposed, Repair Replacement of compressor oil 20 ltr top up separator filters with overhaul, Replacement of Zeolite mopleculer sleeves, Replacement of oxygen analyser service cgarge under AMC, Auto drain value, Service charges

SERVICES OF CONSULTANT(COMPETENT PERSON) FOR TESTING OF VARIOUS EQUIPMENTS, SAFETY AUDIT AND ONSITE EMERGENCY PLAN PREPARATION

(A)Testing and calibration of breaker transformer earth pit and cable and IDMT Relay fitting to get DGMS approval as per CEAR regulation 45 (B) Testing and calibration of breaker transformer earth pit and cable and IDMT Relay fitting to get DGMS appr

Magnetic defectograph test (Non-Destructive test) of Winding Ropes in running winder of 400KW double drum winder in Turamdih Mines at an interval of six month for the period of two year.

Testing and calibration of equipments at main sub-station , different places of mines of Kuju colliery under Kuju Area.

Repairing and calibration of FIP and Nozzles of Diesel Bowser Reg. No.-UP16CT4690 at ABOCP Mines Block-II Area

repairing and calibration of 02 sets of fip and nozzles suitable for bs6d170 engine applicable to beml 1000 excavator

Custom Bid for Services - PROPOSAL FOR CALIBRATION OF ELECTRICAL LAB EQUIPMENT FOR 2X500MW POWER PLANT UNITS OF KTPS DVC

Annual Maintenance contract for repair, calibration and web based data monitoring of 02 no. piezometers at TSOCP, Hazaribagh Area

Testing and calibration of different electrical equipments, Transformers and relays of 11/3.3KV 3MVA sub station of Govindpur Project

Repairing/calibration of fuel injector pump of Escort Crane SI. No. BPW-9055 of Auto Workshop, Laikdih, CV Area.

Commissioning, Testing n Calibration of WB No. 01of Digital Make Electronic Road Weighbridge inside Khasmahal Mines under AKK OCP

Repairing/overhauling and calibration of FIP and Nozzle of BD355 Dozer SL.No.11834 of Kuya OCP, Bastacolla Area IX

Repairing and calibration of 16 sets of FIP and Nozzles suitable for BS6D170 engine applicable to BEML BD355 Dozer

CALIBRATION OF 5KV DIGITAL IR TEST SET (Model: S1-568) - MEGGER along with Supply of 3x10 MTRS HV TE

Digital Capacitance Meter. Detail specification as per attached annexure (firm must submit Calibration Checking Certificate along with the material).

NDT testing of vital components installed at Vertical shaft section/Winder section/manriding system and structural stability, Non Destructive tests and proof load test of 15 Tons overhead crane of Moonidih Project, W.J.Area.

Calibration/Testing of newly installed 60 MT Road Weigh Bridge by shifting of 20 MT loose weights from different places of Plant area store room to 60 MT road weigh bridge and testing the road weigh bridge with 20 MT loose weights for calibration/te

Calibration / testing by loose test weights of 40 MT Electronic Road Weighbridge at an interval of seven (7) days of Sudamdih Coal Washery for period of six months.

Proof load test and NDT of 01 No. 30 Ton Capacity TIL crane and 02 Nos. 09 Ton Capacity ACE Crane as per DGMS regulation 215(II) at DOCP Kusunda Area BCCL Dhanbad, Jharkhand

Selection of Laboratories for Testing of Products/Material - Welded joint; Buyer to use custom filter to input technical specification of the product/material so that service provider may provide price offering accordingly; Number; NDT

Repair, Maintenance, replacement and calibration of pump nozzle, head works, and engine works of municipal vehicle on rate contract basis

Testing and calibration of equipments at mines sub-station, OCP and Kuju new siding of Topa Project under Kuju Area.

For Repairing / Calibration of FIP and Nozzle of D.G. Set of Service van BG05-6605 at AKWMOCP katras Area BCCL

Complete overhauling of engine and calibration of fuel pump of ACE Crane 12 Ton at Tapin North OCP, Hazaribagh Area.

Complete overhauling of Engine its foundation and calibration of fuel pump of ACE Crane 12 Te. Crane of Jharkhand OCP.

Repairing of complete overhauling of engine its foundation and calibration of fuel pump of ACE Crane 12 Te. of JOCP.

Repairing and Calibration of 10 sets of FIP and Nozzles suitable for BS6D170 engine applicable to BD155 OR BD355 DOZER

Repairing and Calibration of 10 sets of FIP and Nozzles suitable for BS6D170 engine applicable to BD155 and BD355 dozers

Loading and unloading work of CI test weight for testing and calibration for stamping of the weighbridges under Kusunda Area.

Repairing and calibration of FIP SL.No. 75606224 Rotary Type of telecom payloader SL.No.4208 of Bastacolla Colliery, Bastacolla Area IX

Testing and calibration of relay and breaker at main sub-station 11kv/3.3kv of Jharkhand OC Project under Hzb Area

Custom Bid for Services - Calibration Maintenance Servicing with Annual Verification and Stamping of 60 MT Weigh Bridge at Kendadih Mine

Reagent Pack for HDC-Lyte Pro, Daily Cleaner For HDC-Lyte Pro, Quality control For HDC-Lyte Pro, ERBA H5 CON quality Control 3mlx3, Elite H CAL Calibrator 3ml for HD560 5 part

STATUTORY EXAMINATION TESTING NDT AND HYDRAULIC

Custom Bid for Services - Testing of Oil of Power Transformers installed in various locations Similar Category Selection of Laboratories for Testing of Products/Material Testing Service for On-Board/Commissioned Equipment/Instrument related to Plant

Custom Bid for Services - Rate Contract for Maintenance Servicing and Calibration of Metrohm make Karl Fischer Titrator Model 899 Coulometer of Chemical Laboratory CTPS DVC on OEM basis for the under mentioned job as per description of work scope of ... Services Calibration Services

Calibration Services - Cleaning testing and adjusting of CI test weights 20 kg each to be used for calibration of 50 Te Electronic Road Weighbridge No 01 and 02 at the time of annual stamping installed at Purnadih OCP NK Area; 1600 nos 20 kg CI test ..

Dismantling, servicing, calibration /setting, testing of healthy trip with providing required materials to associated control ckt to11 KV as well as 3.3 KV switch for Safety point of view installed at Kabribad Mine, GRD Project

(A) Rep. of Electrical Control Unit of Dental Chair of CH, Dakra (B) Rep. of 03 nos. capacity balance machine of Area Quality Control Lab and (C) Rep. and Maint. of Control Panel of 60 KVA DG Set of RCC and 15 KVA DG Set of ATC under GMU, NK Area.

Renovation of Laboratory building (Civil Work) of Quality Control Division ( Irrigation), Ranchi, District-Ranchi.

HDC LYTE PLUS ABGEM Reagents pack, Daily Cleaner for ABGEM, Quality Control for ABGEM