Inspection, Testing & Audit Tenders in Kerala

MONITOR VOC PORTABLE HANDHELD PDPP, CALIBRATION INST INCL TRANSPTN

Purchase in order to satisfy the syllabus requirements of MTech Thermal Science Laboratory course works

AS PER THE ATTACHED TENDER DOCUMENTS

JJM 2020-21 Setting up Up-gradation Operation of Laboratories for WQMS Procurement of 8 nos Micro processor based bench top touch screen pH meter for various Quality Control Laboratories of Kerala Water Authority

Custom Bid for Services - Temperature Uniformity Survey of Heat Treatment Furnace MF IV, Custom Bid for Services - Temperature Uniformity Survey of Heat Treatment Furnace ACF II, Custom Bid for Services - Temperature Uniformity Survey Of Heat ... Category Calibration Services ... Services Calibration Services ... Services Calibration Services ... Services Calibration Services ... Services Calibration Services

PLATE PACK 103 PARAMOUNT TPI ETP5 MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Document required from seller Additional Doc 1 (Requested in ATC), Additional Doc 2 (Requested in ATC), Additional Doc 3 (Requested in ATC), Additional Doc 4 (Requested in ATC) *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer Bid to RA enabled No Type of Bid Single Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days Inspection Required (By Empanelled Inspection Authority/Agencies pre- registered with GeM) No Evaluation Method Total value wise evaluation Bid Number ( ) : GEM/2024/B/5170351 Dated : 17-07-2024 Bid Document EMD Detail 1/5 Required No ePBG Detail Advisory Bank ICICI ePBG Percentage(%) (%) 5.00 Duration of ePBG required (Months) ( ) . 24 (a). EMD & Performance security should be in favour of Beneficiary, wherever it is applicable., Beneficiary : PROCUREMENT MANAGER KERALA, Bharat Petroleum Corporation Ltd, Bharat Petroleum Corporation Ltd, Ministry of Petroleum and Natural Gas (Archana A V) Splitting

Sterile Hypodermic Needles for Single use (V2) (Q2)

Sterile Hypodermic Needles for Single use (V2) (Q2)

Surgical Face Masks (V3) (Q2)

Sterile Hypodermic Needles for Single use (V2) (Q2)

Sterile Hypodermic Syringe (V3) (Q2)

Supply, Installation, Calibration, Standardisation, Commissioning of Double Beam Spectrophotometer(PC Based)

CANISTER ZERO GRADE NITROGEN, CALIBRATION CANISTER NH3 50 PPM, METHANE CANISTER

Portable Multi Gas Detector Hand Held, Manual calibration kit: Can, Reg., Adaptor

For making the Govt. building premises hygienic before commencement of Monsoon

Supplying, erecting, commissioning and testing of 1No. 120 HP centrifugal pumpset

JJM 202122 Setting up upgradated operation of laboratories NABL accreditation Shifting and setting up of the existing Quality Control Sub District Lab of Chittur block to the first floor level space of OH tank, near Chittur Muncipality office

NITROGEN, ZERO GRADE, IN 101 CARBON STEEL CYLINDERS, SO2 CALIBRATION GAS(1400 ppm SO2 AND BALANCE N2), Multi Componenet Natural Gas Mixture for Calibration, Helium Carrier Gas in 47 ltr CS Cylinder

Cable Drift Measurement System (CDMS), Testing and Calibration Mechanism for CDMS, Development Charges

DIGITAL DEPTH GAUGE, (0-150) MM MAKE: MITUTOYO MANUFACTURER’ S CALIBRATION CERTIFICATE REQUIRED

Jal Jeevan Mission Hiring of Vehicle for Water Sample Collection related to Jal Jeevan Mission activities for Quality Control District Labs and Sub District Labs of Kollam Hiring of vehicle below 1500 cc on contract basis for 2025 2026

Enhancement of KSEB contract demand - replacing of CT PT unit and TOD meter.

Supply and Installation of Precision Electronic Weighing Balance suitable for accredited calibration lab use.

Cloth Polyester and Viscose Dope Dyed- Uniform Cloth Average Turn Over of Last 3 Years 3000 Lakh (s) Experience with Gov. Required 3 Year (s) Cloth Polyester And Viscose Dope Dyed- Uniform Cloth ( 1765029 ) Technical Specifications Specification ... of Quality Assurance , ...

Repair, Maintenance, and Installation of Plant Systems/Equipments (Version 2) - CALIBRATION OF PORTABLE H2S SENSOR (MAKE M40, MODEL 453002 & HP SERIAL - 1127667); CALIBRATION OF PORTABLE H2S SENSOR (MAKE M40, MODEL 453002 & HP SERIAL - 1127667); Ser..

Rinse Solution with lactate for ABL 800, Calibration solution 1 with lactate, Calibration solution 2 with lactate, Cleaning Solution with lactate, Printer paper for ABL 800, Potassium membrane for ABL 800, Lactate membrane for ABL 800

Repair, Maintenance, and Installation of Plant Systems/Equipments (Version 2) - Office Space; Fabrication and Installation with associated Material; All material provided by Seller for Fabrication and Installation of NDT Bay

Electronic Milk Analyser with adulteration testing equipment (Q3)

Supply of Quality Testing Lab Equipments to WTP of WSS to Irikkur and Adjoining Villages at Poovam and WTP of WSS to Naval Academy at Chanadukkam

Custom Bid for Services - CLEANING OF HOT OIL HEATER TUBES, CLAMPS REPLACEMENT, PREPARATION FOR NDT, INSITU METALLOGRAPHY & HYDROTEST OF TUBES/COILS IN POSITION & SHELL REPAIR Similar Category Repair, Maintenance and Installation of Plant Systems/Equipments

The estimate is prepared based on the request received from Deputy Controller , Leagel Metrology

AMC for a period of two years, including calibration, for the IVF equipments in the infertility clinic of this institution

calibration Weights or Weights Sets (Q2) MSE Exemption for Turnover Yes Startup Exemption for Turnover Yes Document required from seller Experience Criteria, Bidder Turnover, Certificate (Requested in ATC), OEM Authorization Certificate *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer Do you want to show documents uploaded by bidders to all bidders participated in bid? No Bid to RA enabled No Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 5 Days Bid Number ( ) : GEM/2025/B/5990246 Dated : 24-02-2025 Bid Document 1/8 Inspection Required (By Empanelled Inspection Authority/Agencies pre- registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Advisory Bank State Bank of India EMD Amount 20000 ePBG Detail Advisory Bank State Bank of India ePBG Percentage(%) (%) 5.00 Duration of ePBG required (Months) ( ) . 18 (a). EMD EXEMPTION: The bidder seeking EMD exemption, must submit the valid supporting document for the relevant category as per GeM GTC with the bid. Under MSE category, only manufacturers for goods and Service Providers for Services are eligible for exemption from EMD. Traders are excluded from the purview of this Policy. (b). EMD & Performance security should be in favour of Beneficiary, wherever it is applicable., Beneficiary : Fluid Control Research Institute Fluid Control Research Institute, Kanjikode West, Palakkad 678623, (Fluid Control Research Institute) MII Purchase Preference MII Purchase Preference Yes MSE Purchase Preference MSE Purchase Preference Yes 2/8 1. If the bidder is a Micro or Small Enterprise as per latest definitions under MSME rules, the bidder shall be exempted from the requirement of "Bidder Turnover" criteria and "Experience Criteria" subject to meeting of quality and technical specifications. If the bidder is OEM of the offered products, it would be exempted from the "

calibration Weights or Weights Sets (Q2) MSE Exemption for Turnover Yes Startup Exemption for Turnover Yes Document required from seller Experience Criteria, Bidder Turnover, Certificate (Requested in ATC), OEM Authorization Certificate *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer Do you want to show documents uploaded by bidders to all bidders participated in bid? No Bid to RA enabled No Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 5 Days Bid Number ( ) : GEM/2025/B/5992984 Dated : 25-02-2025 Bid Document 1/8 Inspection Required (By Empanelled Inspection Authority/Agencies pre- registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Advisory Bank State Bank of India EMD Amount 10000 ePBG Detail Advisory Bank State Bank of India ePBG Percentage(%) (%) 5.00 Duration of ePBG required (Months) ( ) . 18 (a). EMD EXEMPTION: The bidder seeking EMD exemption, must submit the valid supporting document for the relevant category as per GeM GTC with the bid. Under MSE category, only manufacturers for goods and Service Providers for Services are eligible for exemption from EMD. Traders are excluded from the purview of this Policy. (b). EMD & Performance security should be in favour of Beneficiary, wherever it is applicable., Beneficiary : Fluid Control Research Institute Fluid Control Research Institute, Kanjikode West, Palakkad 678623, (Fluid Control Research Institute) MII Purchase Preference MII Purchase Preference Yes MSE Purchase Preference MSE Purchase Preference Yes 2/8 1. If the bidder is a Micro or Small Enterprise as per latest definitions under MSME rules, the bidder shall be exempted from the requirement of "Bidder Turnover" criteria and "Experience Criteria" subject to meeting of quality and technical specifications. If the bidder is OEM of the offered products, it would be exempted from the "

Repair, Maintenance, and Installation of Plant Systems/Equipments (Version 2) - LPG Bottling Plant; Periodic Statutory Inspection and Testing Works including Cleaning NDT Hydrotesting Certification and Allied Works for of 3 Nos of 1200 MT Mounded LP..

Set of MPT kit consisting of (1) Black magnetic ink as per RDSO spec. no RDSO/M&C/NDT/109 (Rev- 2 ) OCT-2020 (Wet method ) in oil media in 420 ml dispenser operating aerosol /container (Net content 400 ml/280 gm). (2) White contrast paint as per BS- 5044-1973 in 420 ml dispenser operating aerosol container (Net content -400 ml/280 gm ) used with visible magnetic particle for wet method inspection in ratio:- 1 (Black) : 2 ( white). (3) Cleaner in 420 ml. Aerosol container (Net content -400 ml/280 gm ).

Magnetic Stirrers ( 4 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values CONFIGURATION AND FEATURES Number of stirring Positions 1 1 Calibration Manual Calibration Manual Calibration Type of Drive Motor Carbon Brush Motor AC Carbon Brush Motor AC Display Option/Output Read out Option Digital Digital Magnetic stirrer is: with a hot plate or some other means for heating the liquid with a hot plate or some other means for heating the liquid Timer Setting (Increment step) (sec) 1 * Minimum Speed Possible (RPM) 1 * Mangnetic stirrer Type fixed speed fixed speed Controler type Electronicaly controlled Microprocessor Controlled, Electronicaly controlled 1/4 IP rating or Ingress protection rating 30 30 Programmable false true, false Direction change feature false * Speed Control Accuracy of set speed (+/-) (RPM) 1 1 Maximum Stirring capacity per position 1 1.0 Top plate Material Cast aluminium Cast aluminium Timer Provided false * Base material Die cast aluminium * User Interface Digital Front Panel Digital Front Panel Pulse mode false * Type of Data Logging Option NOT AVAILABLE * Slip Detection false * Last run memory false true, false Accessories and spares included in standard pack STANDARD PRODUCT * CERTIFICATIONS Firm Certified to ISO9001:2008 or latest YES * Product is CE certified (Seller to furnish supporting document to Buyer on demand) true true EN/IEC directives YES * Name and Address of the Lab NEW DELHI * Availability Of Test Report (to be furnished by Seller to Buyer on demand) from Central Govt/NABL/ILAC accredited laboratory to prove conformity to specifications false * Test Report details; Number, date of issue, name and address of issuing laboratory LABS, NEW DELHI * WARRANTY Warranty on Machine 3 3.0 (or higher) 2/4 MISC In built-in multi-step safety system to continuously monitor device operation and protect against damage should the operation exceed the pre-determined parameters: Unsafe Hotplate Temperature – Temperatures exceed safety Parameters Unsafe Hotplate Temperature – Temperatures exceed safety Parameters, Probe Failure – Probe Break Or Become Disconnected, Vessel Breakage – Should The Vessel Have A Crack And The Solution Begins To Leak, provision for preventing liquid from damaging equipment Weigh 15 * Ambient operating Temperature range 0 to 50 degree Yes * Permissible Relative Humidity (%) 30 * POWER SUPPLY Input Voltage with Phase (V) 220 V, 50 Hz AC, single phase * Input Current (A) 1 * Power Consumption ( 1500 * SPEED Speed Mode Fixed Speed Fixed Speed, Variable Speed Speed (RPM) 1 * Minimum Speed increment step (RPM) 1 * Maximum Speed (RPM) of variable speed mode equipment 1 * DIMENSIONS External Dimension: Height ) 455 * External Dimension: Width 605 * External Dimension: Depth 455 455.0 Body Material Mild Steel Mild Steel Finish of Body material Powder coated * STIR BAR Stir bar cover material Glass * Stir Bar length 1 * TOP PLATE Top plate area shape Rectangular * Length of rectangular top plate area 605 * Width of rectangular 455 * 3/4 top plate area Circular Top plate diameter 1 * Top plate Finish PTFE coated PTFE coated * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Suvarna Kumari K 695022, RFF Area, VSSC, Thumba PO 4 15

ANTI DRONE RF JAMMER RIFLE INCLUDING 2 YEAR WARRANTY AND 2 YEAR CAMC, CALIBRATION SENSOR EQUIPMENT FOR ANTI DRONE RF JAMMER RIFLE

Theatre chair, Projector LED, Acoustic Ceiling, Audio Meter, Digital podium, Media Room Installation and calibration, Gallery platform setting, Wireless mike, floor carpet

Customized AMC/CMC for Pre-owned Products - VIDAS; Biomerieux; Annual Maintenance Contract (AMC); Six- Monthly; No

Custom Bid for Services - OVERHAULING, TESTING & CALIBRATION OF SERVOMOTORS IN BPCL KOCHI REFINERY Similar Category Operation And Maintenance Of Other Machines And Plants

Magnetic Stirrers ( 4 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values CONFIGURATION AND FEATURES Number of stirring Positions 1 1 Calibration Manual Calibration Manual Calibration Type of Drive Motor Carbon Brush Motor AC Carbon Brush Motor AC Display Option/Output Read out Option Digital Digital Magnetic stirrer is: with a hot plate or some other means for heating the liquid with a hot plate or some other means for heating the liquid Timer Setting (Increment step) (sec) 1 * Minimum Speed Possible (RPM) 2 * Mangnetic stirrer Type fixed speed fixed speed Controler type Electronicaly controlled Electronicaly controlled IP rating or Ingress protection rating 30 30 1/4 Programmable false true, false Direction change feature false * Speed Control Accuracy of set speed (+/-) (RPM) 0 0 Maximum Stirring capacity per position 1 1.0 Top plate Material Cast aluminium Cast aluminium Timer Provided false * Base material Mild Steel * User Interface Digital Front Panel Digital Front Panel Pulse mode false * Type of Data Logging Option NOT AVAILABLE * Slip Detection false * Last run memory false true, false Accessories and spares included in standard pack NSW 255, 300X455 MM, * CERTIFICATIONS Firm Certified to ISO9001:2008 or latest YES * Product is CE certified (Seller to furnish supporting document to Buyer on demand) true true EN/IEC directives YES * Name and Address of the Lab NEW DELHI * Availability Of Test Report (to be furnished by Seller to Buyer on demand) from Central Govt/NABL/ILAC accredited laboratory to prove conformity to specifications false * Test Report details; Number, date of issue, name and address of issuing laboratory LABS, NEW DELHI * WARRANTY Warranty on Machine 3 3.0 (or higher) MISC In built-in multi-step safety system to Unsafe Hotplate Temperature – Unsafe Hotplate Temperature – 2/4 continuously monitor device operation and protect against damage should the operation exceed the pre-determined parameters: Temperatures exceed safety Parameters Temperatures exceed safety Parameters, Probe Failure – Probe Break Or Become Disconnected, Vessel Breakage – Should The Vessel Have A Crack And The Solution Begins To Leak, provision for preventing liquid from damaging equipment Weigh 10 * Ambient operating Temperature range 0 to 50 degree Yes * Permissible Relative Humidity (%) 40 * POWER SUPPLY Input Voltage with Phase (V) 220 V, 50 Hz AC, single phase * Input Current (A) 1 * Power Consumption ( 1500 * SPEED Speed Mode Fixed Speed Fixed Speed Speed (RPM) 1 * Minimum Speed increment step (RPM) 1 * Maximum Speed (RPM) of variable speed mode equipment 1 * DIMENSIONS External Dimension: Height ) 300 * External Dimension: Width 455 * External Dimension: Depth 300 300.0 Body Material Die cast Aluminium Die cast Aluminium Finish of Body material Powder coated * STIR BAR Stir bar cover material Glass * Stir Bar length 1 * TOP PLATE Top plate area shape Rectangular * Length of rectangular top plate area 300 * Width of rectangular top plate area 455 * Circular Top plate diameter 0 * 3/4 Top plate Finish PTFE coated PTFE coated * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Suvarna Kumari K 695022, RFF Area, VSSC, Thumba PO 4 15

General cleaning , tray washing , curd buttermilk. kattimoru and lassi packing,ETP Operation , uniform washing, weighbridge calibration, products and washed tray shifting, office and store assistant

TPUC Reagent, D Dimer, Precision QC for thyroid AB, Alpha Amylase, Cartridge Chloride, GGT Kit Kinetic, Vitamin D3 Eclia Kit, HDL Cholesterol, RA Factor, SMS for cleaning Cobas, Iron Kit Serum, Bilirubin Total, HBA1C Control High 1 x 0.5 m1, HBA1C ... solution, Quality control Randox ... II, Quality control Randox ...

As per BOQ and tender documents

DTH/Cable Service - Channel Based - New Pack/Renewal of Pack per connection for DTH Service; Tata Play; Digital HD; BBC World News SD (English News), Zee 24 Ghanta SD (Bangla News), Times Now World SD (English News), NDTV 24*7 SD (English News), NDT..

Customized AMC/CMC for Pre-owned Products - Gas Generator; PEAK SCIENTIFIC; Comprehensive Maintenance Contract (CMC); Half Yearly; No

ok verified

SUPPLY AND INSTALLATION OF FERRITE METER-FERITSCOPE, SUPPLY OF CALIBRATION BLOCKS FOR FERITSCOPE[ CAL-T- SET-FERRITE 3.0-110 FN], SUPPLY OF PLUGGABLE DIGITAL MAGNETIC INDUCTIVE WIRED PROBE[ PROBE D-F-Fe] FOR FERITSCOPE

Repair, Maintenance, and Installation of Plant Systems/Equipments (Version 2) - LPG Bottling Plant; PERIODIC STATUTORY INSPECTION AND TESTING WORKS INCLUDING CLEANING, CALIBRATION, HYDROTESTING, CERTIFICATION, RLA AND ALLIED WORKS FOR 5 NOS OF 150 M..