Loading…
Loading…
1,977 results • Best match
Tender for Selection of Supervision and Quality Control Consultants (SQC) for Multi Village Drinking Water Supply Schemes under PIU Bhopal Part 2
Tender for Selection of Supervision and Quality Control Consultant for Balance Work of Buxwaha Multi Village Scheme District Chhatarpur Sagar and Damoh
Folding Endurance Tester, AMC & calibration-1st Year post warrantee, AMC & calibration-2nd Year post warrantee, AMC & calibration-3rd Year post warrantee
Custom Bid for Services - Annual Maintenance Contract & Complete Calibration Of Thermo Scientific Niton Handheld XRF as per attached Annexure-2 Similar Category Customized AMC/CMC for Pre-owned Products
REPAIR/REPLACEMENT AND PREVENTIVE MAINT OF 33/0.433 KV DISTRIBUTION NETWORK, TRANSFORMER, DEHYDRATION OF TRANSFORMER OIL, CALIBRATION OF RELAY VCBS AND OTHER CONNECTED WORKS AT DSCC UNDER GE DRONACHAL
LTE for Appointment of Conjoint Surveyor for testing and calibration of weighscale, supervision of weighment, sampling, sample preparation and moisture determination of Copper Concentrate of MCP Origin at MCP.
Availing services of Service Engineer for calibration of turbine supervisory instruments and vibration monitoring system of 2x250MW STPS by OEM Forbes Marshall Pvt Ltd During AOH of unit 11.
Expert supervisory services for the work of calibration, adjustment , and tuning of TG site C and I system with max DNA DCS system during AOH of 2x250MW STPS Sarni.
Availing services of Service Engineer for calibration of turbine supervisory instruments and vibration monitoring system of 2x250MW STPS by OEM Forbes Marshall Pvt Ltd During AOH of unit 10.
PROVN CUM SPECIAL REPAIR OF RETROFIT EMISSION CONTROL DEVICE RECD WITH CALIBRATION OF RECD IN DG SET AT INF SCHOOL AREA AND OTHER CONNECTED WORKS UNDER GE MIS MHOW
Work of servicing, checking or calibration and tuning of controller panels of ESP fields including transformer rectifier set testing of unit no. 3 and 4, at SGTPS, MPPGCL, Birsinghpur.
Hand driven generator type Metal Body 500V Analogue Insulation Tester (MEGGER) with standard accessories (Test lead and carrying case) and valid calibration certificate (NABL or any govt. approved age
Digital infrared temperature measurement Gun non-contact type for measuring of AXLE Box temperature as per Annexure-A.Note:-Calibration certificate traceable to NABL or Govt. approve test house should
MAC MASTER Steel Ratchet Type Torque Wrench, Range 135 - 675 NM (14-70 KGS/MTR), Model: 500R, Square Drive size - 3/4", with calibration certificates. Make:- Mac Master TW500R
REPAIR/REPLACEMENT AND PREVENTIVE MAINT OF 33/0.433 KV DISTRIBUTION NETWORK, TRANSFORMERS, DEHYDRATION OF TRANSFORMER OIL, CALIBRATION OF RELAY, VCBs AND OTHER CONNECTED WORKS AT DSCC UNDER GE DRONACHAL
Custom Bid for Services - Diagnosis and repair of fluke make power logger Model no 1736 including faulty parts replacement and calibration of instrument Similar Category Repair and Overhauling Service
BIMETAL BAND SAW BLADE M-42 GRADE, 3/4 TPI SIZE 4100 X 34 X 1.1 MM (Q3), BIMETAL BANDSAW BLADE M-42 GRADE, 3/4 TPI, SIZE - 3505 MM X 34 MM X 1.107 (Q3)
1_BP9018581283, 2_BP9088583242, 3_BP9088586080, 4_BP9078518898, 5_BP9078518901, 6_BP9088572500
Supervision and Quality Control Consultancy of Rural Roads (including bridges and culverts) being constructed under CMGSY for the package Sidhi Singrauli SQC BT_01
MPRRDA invites online proposals from the reputed consultants for Supervision and Quality Control Consultancy of Rural Roads being constructed under Mandi Board Fund.
MPRRDA invites online proposals from the reputed consultants for Supervision and Quality Control Consultancy of Rural Roads being constructed under Mandi Board Fund.
MPRRDA invites online proposals from the reputed consultants for Supervision and Quality Control Consultancy of Rural Roads being constructed under Mandi Board Fund.
MPRRDA invites online proposals from the reputed consultants for Supervision and Quality Control Consultancy of Rural Roads being constructed under Mandi Board Fund.
MPRRDA invites online proposals from the reputed consultants for Supervision and Quality Control Consultancy of Rural Roads being constructed under Mandi Board Fund.
Expert supervisory services for the work of calibration, adjustment, and tuning of TG site C and I system with max DNA DCS system during AOH of Unit 11,2x250MW STPS Sarni
Deputation of Service Engineer for Repairing, Servicing and Calibration of Continues Ambient Air Quality Monitoring Station installed at 4 locations Erector hostel, ETP, Near NDCT and Hospital of STPS Sarni
Work contract for Complete servicing of rotor of PA Fan 5 B (Model AP2 20/21) with blade pitch calibration installed at boiler of 1X500 MW Unit SGTPS, MPPGCL, Birsinghpur
REPAIR/ MAINT CALIBRATION OF VCBS/ OCBS 33/11 KV AND REPAIR /REPLACEMENT OF HT JOINTS, HT CABLE, SERVICING AND OTHER CONNECTED WORKS AT DRDE GWALIOR UNDER GE (I) RND DELHI
Work for consultancy services for providing NABL (National Accreditation Board for Testing and Calibration Laboratories) accreditation Certificate and conducting an internal audit, management review, rectification services, corrective action on audit
Expert supervisory services for the work of calibration, adjustment, and tuning of TG site C and I system with max DNA DCS system during AOH of Unit 10,2x250MW STPS Sarni
Calibration gas mixture with regulator (with gas concentration and quantity certificate) for DGA Make SPANTECH UK or Chemtron Science laboratory Mumbai or Equivalent in 0.5 litre W/C aluminum canister
DIGITAL OUTSIDE MICROMETER 0-25 MM LEAST COUNT 0-001 MM. MAKE-MITUTOYO,BAKER,BOSCH INCLUDES CARRY BOX SETTING STANDARDS, CERTIFICATE OF CALIBRATION. GeM PO Description : : MITUTOYO Stainless Steel LCD
Growler tester equivalent, MODEL - Y A/D, AC/HWDC, 230 V, 50 HZ OF SIMS BRAND DUALMAGNETIZATION YOKE OR EQUIVALENT, CONSISTING OF FOLLOWING ACCESSORIES (WITH TEST &CALIBRATION CERTIFICATE) : (1) THERM
"1/2 INCH Square Drive Ratchet Type Torque Wrench, with Chrome-Molybdenum alloy steel square drive, Torque Range 25-135 NM(+/-10NM), along with Calibration certificate (as per Specification attached)
Digital Clamp Meter of True RMS for measuring DC current range of 2000 Ampere with standard accessories. The equipment to be supplied with calibration certificate and warranty certificate . Make: K
LCR Meter with transistor tester to Model No: LCR55A. Note: 1) Item to be supplied along with calibration and warranty certificate. Note: 2) Firm should submit authorised dealership certificate along
Custom Bid for Services - APPOINTING AN ENERGY AUDITING FIRM FOR CARRYING OUT MANDATORY MONITORING AND VERIFICATION (M&V) AUDIT FOR RENEWABLE CONSUMPTION OBLIGATION (RCO) AT BPCL, BINA REFINERY Similar Category Energy Audit Service - Lumpsum Based
SERVO LEVEL GAUGE-NMS81-BC2BB1B1A2AC3FD11BEA1ASJNTC (LPG), CALIBRATION CHAMBER-71337797 (LPG), CALIBRATION CHAMBER-71337798 (NAPHTHA)
Online proposals from the reputed consultants for Supervision and Quality Control Consultancy of Bridge works being constructed under PMGSY/other Schemes for the packages.
Online proposals from the reputed consultants for Supervision and Quality Control Consultancy of Bridge works being constructed under PMGSY/other Schemes for the packages.
Online proposals from the reputed consultants for Supervision and Quality Control Consultancy of Bridge works being constructed under PMGSY/other Schemes for the packages.
Online proposals from the reputed consultants for Supervision and Quality Control Consultancy of Bridge works being constructed under PMGSY/other Schemes for the packages.
MPRRDA invites online proposals from the reputed consultants for Supervision and Quality Control Consultancy of Bridge works being constructed under PMGSY and other Schemes
online proposals from the reputed consultants for Supervision and Quality Control Consultancy of Rural Roads being constructed under MPRCP, PMGSY, ADB and other schemes
online proposals from the reputed consultants for Supervision and Quality Control Consultancy of Rural Roads being constructed under MPRCP, PMGSY, ADB and other schemes
MPRRDA invites online proposals from the reputed consultants for Supervision and Quality Control Consultancy of Bridge works being constructed under PMGSY and other Schemes
MPRRDA invites online proposals from the reputed consultants for Supervision and Quality Control Consultancy of Bridge works being constructed under PMGSY and other Schemes
Online proposals from the reputed consultants for Supervision and Quality Control Consultancy of Bridge works being constructed under PMGSY/other Schemes for the packages.
Online proposals from the reputed consultants for Supervision and Quality Control Consultancy of Bridge works being constructed under PMGSY/other Schemes for the packages.
DEPLOYMENT OF COMPUTER OPERATOR IN OFFICE OF THE CHIEF ENGINEER SATPURA BHAWAN, QUALITY CONTROL UNIT-SUB DIVISION AND STATE RESEARCH LABORATORY SHYAMLA HILLS, BHOPAL