Inspection, Testing & Audit Tenders in Maharashtra

DIGITAL BUFFER HEIGHT GAUGE, accuracy plus/minus 0.2 mm. measuring rang 900 mm to 1140 mm. model no. BHG 1 (E). with OEM,s original calibration certificate. make -PIE or similar.

DIGITAL VERNIER CALIPER, RANGE: 0-600MM, Reading 0.01 mm/0.0005 inch to BRAND MITUTOYO OR SIMILAR to BAKER SDN60. Measurable in metric and British system. Necessary calibration certificate to be submi

DIGITAL BORE GAUGE WITH DIGITAL DIAL GAUGE MEASURING TO RANGE 160 TO 250 MM LEAST COUNT 0.001 MM WITH CALIBRATION CERTIFICATE MAKE MITUTOYO-JAPAN / TESA -SWISS /PRECISION- GERMANY/ TECLOCK- JAPAN Acc

Disc micrometer for Measuring Gear Teeth Gear Teeth Size 200-225mm of Mitutoyomodel 123-109 or equivlent of britool or Tohici make only with calibration certificate of NABL approve specification Gradu

Standard calibration gas mixture in canister with nozzle, fine control & gas composition/ gas quality certificate for DGA water capacity 0.5 Ltr. Approx pressure 20 Kg/cm2 in Canister & stability 12 m

DIGITAL VERNIER CALIPER MEASURING RANGE 0-450mm WITH RESOLUTION 0.01mm. MAKE: INSIZE MODE CODE 1135-451 OR SIMILAR MODEL OF MITUTOYO/BAKER/TESA MAKE. CALIBRATION CERTIFICATE FOR THE INSTRUMENT FROM GO

DIGITAL TWO POINT INSIDE MICROMETER, RANGE 200-225 MM,LEAST COUNT 0.001 MM WITH CALIBRATION CERTIFICATE TRACEABLE TO NATIONAL STANDARD MAKE-MITUTOYO/FORBES/YUZUKI/ALPA ONLY Offered make: FORBES OR AL

Digital bore gauge with digital dial gauge measuring to range 160 to 250 mm least count 0.001 mm with calibration certificate from laboratory traceable to NABL and warranty certificate. Make: Mitutoyo

Cross key, wrench and screw as per page no.70 of RDSO Technical pamphlet G-80 REF-FIG.4.5 OF G-80. With One Year Calibration Certificate from date of Supply.

Digital Outside Micrometer, RatchetStop Range 175-200 mm having least count 0.001 mm with Master gauge Make : Mitutoyo or Baker along with Calibration Certificate of NABL approved lab or NPL Accepted

Calibration gas mixture in 0.5 litre W/C aluminum canister alongwith fine control needle valve and pressure gauge: Methane - 1000 PPM, Ethane - 1000 PPM, Ethylene - 1000 PPM, Acetylene - 1000 PPM, Hyd

Dry Film Thickness (DFT) Gauge for measuring paint thickness having Range 0-2000 Microns, with NABL Calibration certificate as per Annexure-A attached. Note: Purchase from OEM or authorised dealer wit

MASTER SETTING RING SIZE: 130 MM, SIZE TOLERANCE: 0.006 MM. MATERIALS - OIL HARDENING NON SHRINKING GAUGE STEEL. HARDEN & TEMPERED TO 60-62 HRC. TESTING & CALIBRATION CERTIFICATE TO BE PROVIDED NABL A

Digital Snap Gauge With Dial Indicator. Least Count 0.001 mm, Range: 200-225 mm, along with calibration sticks. Detailed Specification as per Annexure attached. Note: The Firm shall submit NABL Calibr

Set of standard calibration Gas canister for DGA consisting of (1) Methane, Ethane, Ethylene, Acetylene, Hydrogen, CO & CO2 each 100 ppm and Nitrogen balance, Qty- 01 No. (2) Methane, Ethane, Ethyle

Supply of wheel diameter measuring Gauge with Digital Display for Measurement of wheel diameter in both mounted and Un-mounted wheels of carriage and wagons. Material to be supplied after calibration

Torque Wrench Tester (Digital) with Torque Range-10-350 Nm, , Size-1/2 inch, Check with traceable calibration certificate as per Technical Specification as attached in Annexure-'A,' Make : Norbar, Bos

Calibration gas mixture in 0.5 litre W/C aluminum canister alongwith fine control needle valve and pressure gauge: Methane - 1000 PPM, Ethane - 1000 PPM,Ethylene - 1000 PPM, Acetylene - 1000 PPM, Hydr

Set of standard calibration Gas canister for DGA consisting of (1) Methane, Ethane, Ethylene, Acetylene, Hydrogen, CO & CO2 each 100 ppm and Nitrogen balance - 01 No, (2) Methane, Ethane, Ethylene, Ac

Custom Bid for Services - ANNUAL RATE CONTRACT FOR CALIBRATION & MAINTENANCE OF PORTABLE GAS DETECTORS FOR 02 YEAR Similar Category Operation And Maintenance Of Gas Compressor Station Refilling of Fire Extinguisher Cylinders

Custom Bid for Services - BIENNIAL MAINTAINANCE CONTRACT FOR CALIBRATION AND REPAIRING OF HONEYWELL MAKE PORTABLE EXPLOSIVE METERS IN FIRE AND SAFETY AT RCF LTD THAL ON PROPRIETARY BASIS FOR TWO YEARS

Custom Bid for Services - 200136055 Biennial Job Contract for Calibration of Civil Mechanical and Electrical Equipment at FQA Lab at NTPC Solapur Similar Category Operation and Maintenance Power House/Power Plant

Repair, Maintenance, and Installation of Plant Systems/Equipments (Version 2) - Manufacturing Unit; Structural repair, modification and replacement job as safety audit observations AS PER SOW AND Quantum of job; Service Provider

Set of items for lube oil line to cam sh [Set of items for lube oil line to cam shaft bearing as detailed: 1.BOLT. Hex head X INCH-28 TPI x 5/8 INCH-Oll line to rocker arm shaft to EMD PLNG 181311 and BLW PL.No.19010059, Qty/Set-32 Nos. 2. BOLT- Hex ... 20 TPI x ...

Structural repairs to RCC Frame and walls, waterproofing treatment and Painting of the Project Building BSNL Telecom Factory Deonar, Mumbai-88 for structural safety and enhancement of life of building in accordance with Structural Audit carried out

Custom Bid for Services - NDT testing of ACE Crane 08 Ton Sl No 1241 1242 and 7314 TIL Crane RT760 Sl No 408352 and Drill Machines IDM 30 Sl No 902 and 931 RECP Sl No 803 Similar Category Testing Service for On-Board/Commissioned Equipment/Instrument related to Plant

regardign calibratiion of equipment

Custom Bid for Services - Repairing of Parking Brake System and FIP Pump Calibration of 02 no ACE crane Sl No 354319 12T & 31239 11T of GouriDeepOCM Similar Category Repair and Overhauling Service

BID DOCUMENT FOR THE PROCUREMENT OF CNG PROVER KITS FOR CALIBRATION OF CNG DISPENSERS AT KANPUR, BAREILLY AND JHANSI FOR CITY GAS DISTRIBUTION PROJECT OF M/S. CENTRAL U. P. GAS LIMITED.

Testing of chlorine pipe lines, 3 Ton EOT crane and Electronic weighing scale of crane with calibration of Electronic weighing scales at Chlorine plant MIII-A Panjrapur, as per Factories Act 1948.

Contract for Calibration of Measuring Instruments and Gauges used in Rolling Stock Maintenance, Track Measurement & Monitoring work of Coaching Depots & ART/ARMEs at Surat, Udhna, Valsad & Nandurbar for period of 3 years.

Supply & commissioning of equipment assembly setup with AC fitting as per Annexure-A & Annexure- B . Note:- the firm will submitt the warranty certificate,test certificate and calibration certificate along with the material.

Tender for Rate Contract for a period of 2 years for calibration of instruments installed at MRS, DRS, DCS, Cascades and Dispensers at various sites of MNGL Ramanagara, Nashik and Sindhudurg GA.

Work of Testing and Calibration various Protection Relays of 3.3kV Incomer Feeder No. 02, HT Feeder No. 02 and Main Pump no. 204, 205 and 206 feeder Panels at Bhandup Pumping Station.

Feeler gauge long leaf (Thickness gauge) Range 0.05 mm to 1mm, in various leaves composition, 150mm long to MITUTOYO Model No. 184 - 303S or equivalent. Material to be suppled with calibration certifi

THREE LEG INSIDE MICROMETER WITH MASTER RING GAUGE ALONG WITH VALID CALIBRATION TEST CERTIFICATE TRACEABLE TO NABL CERTIFIED LABS, RANGE: 175-200 MM, LC0.001MM; MODEL: 468-177 OF MITUTOYO OR SIMILAR M

Digital Three Point Internal Micrometer Similar to Mitutoyo Make Code No.468-973 to Range 20-50mm, Accuracy 0.001mm with setting rings of 20,25,28,30 and 50mm along with Necessary Calibration and w

Branded Digital speedometer and pulse generator set of 110V DC wall mounted with measuring range of 0.0 to 199.9KM/hr along with test and calibration certificate. One set consist Digital Speedometer 1

Feeler gauge Range 0.03 - 0.50 mm (13 Leaves) Mitutoyo code 184-302S, Blade Length 150 mm long ,of Mitutoyo or equivalent Note: Firm has to submit calibration certificate from any NABL a

Parallelism checking tool No. 12.841.0502 for control arm of LHB coaches. FIRM SHOULD SUBMIT THE TC & GC ALONG WITH MATERIAL. THE ITEM WILL BE SUPPLIED WITH 3RD PARTY CALIBRATION CERTIFICATE FROM NABL

DIGIMATIC INDICATOR ID-C SERIES RANGE 12 MM, LC 0.001 MM WITH ONE YEAR CALIBRATION CERTIFICATE MAKE- MITUTOYO MODEL NO. 543-390B or similar model in Make: TESA/SELEC ACCEPTED MAKE-SELEC.

Digimatic disc micrometer Range 75-100 mm least count 0.001mm with NABL calibration and warranty certificate. Make: Mituoyo 369-253 or similar in Starret and Mahr only. Make/Brand:MITUTOYO 369-253-30

Digital Inside Micrometer Measuring Range 225-250 mm without any setting Ring as per OEM standard. with calibration certificate, make- Mitutoyo or Baker or insize or moore & wright or TESA or SYLVAC

Digital Dial Snap Gauge with least Count 0.001 mm, Range: 300-325 mm. Detail Specification as per Annexure attached. Note: The Firm shall submit NABL Calibration Certificate along with the supply. FI

Ratchet Type Torque Wrench to the range of 50NM -250NM. Calibration Certificate to the validity of 12 months and Warranty Certificate for minimum 12 months to be submitted. Firm's Offer: Make/ Brand :

Torque wrench ratchet type:1/2 inch square drive, Specification: Lbf:50-250, Kgf.mtr:7-35 & N.M:70-340. Make:- Torque Master/Mac master or similar (Mechanical type) Calibration and warranty certificat

Rope type permanent magnet yoke, having lifting power of atleast 20 kgs. at pole spacing 150 mm with yoke carrying case. Firm has to produce test and calibration certificate along with supply.

Branded Digital speedometer and pulse generator set of 110V DC wall mounted with measuring range of 0.0 to 199.9KM/hr along with test and calibration certificate. One set consist Digital Speedometer 1

3/4" Square Drive Ratchet Type Torque Wrench, Cap-135-675 NM (14-70 KGM), as per IS:7268-1974 (Calibration Certificate Should be provided by the firm) ACCEPTED MAKE/BRAND - SAPSONS

Digital outside micrometer LC 0.001 mm, Range 50-75 mm as per specification given in Annexure A. (make Mitutoyo, baker, insize only.) Note: Calibration certificate is to be provided along with materi