Inspection, Testing & Audit Tenders in Maharashtra

CALIBRATION STANDARD CS24 100PPM 200G CONTAINER FOR SPECTROMETER MODEL SPECTROIL Q-100 FOR SPECTRO ANALYSIS ALONG WITH TEST CERTIFICATE AND PURCHASE PROOF OF PROCUREMENT FROM OEM/AUTHORISED DEALER AS

Circuit Breaker Time Interval Meter(Digital) with Standard Accessories, Timing range 1sec, resolution of 0.1 millisec and accuracy +/-0.05%. Similar to model SCOPE SCOT M3K plus with calibration certi

Magnetic stand similar to Mitutoyo model 7010s10, Dial Indicator similar to Mitutoyo model No.- 2109S-10.Gratduation -0.001mm, Along with NABL Calibration certificate. Firm's Offer: As above Make/ Bra

Stainless steel pressure gauge 6 inch dia least count 0.1Kg/cm2 with calibration Make : Uday/Alok/Wika or equivalant of GeM Contract No. GEMC-511687710482958 dt.02/02/2024)

Steel setting ring for calibration of bore gauges nominal dia 100mm, similar to Mitutoyo code no 177-296. Make / Brand: Mitutoyo, Model No. 177-296 Setting ring 100 mm.

DIGIMATIC MICROMETER (DIGITAL OUTSIDE MICROMETER) RANGE: 175 -200 MM, RESOLUTION: 0.001 MM WITH SPC DATA OUTPUT SIMILAR TO MITUTOYO MODEL 293-253-30, MAKE: MITUTOYO /STARRETT / BAKER. CALIBRATION CERT

Custom Bid for Services - CMC along with Calibration for 02 years for 1 x1x3 mtr Enviormental/ISAT Test Chamber Similar Category Operation And Maintenance Of Other Machines And Plants

Repair and Maintenance of Plant/Systems/Equipments - Industry Unit; ANNUAL MAINTENANCE CONTRACT FOR CALIBRATION OF GAS DETECTORS AT RCF THAL ON OPEN TENDER BASIS FOR TWO YEARS; Service Provider

PREP MODIFICATION DRAWING, SITE INSPECTION, PREP AS BUILT DRAWING, RULE 33 CERTFICATION, CERTIFICATION BY TPI

Est. No. 1561 /21-22 Providing strengthening to existing Electrical Installation and Emergency Light system at Rural Hospital Kasarshirshi,Tal. Kasar shirshi and Dist Latur ( Considering Electrical Safety Audit)

SPL REPAIR ROOF WATERPROOFING OF MATERIAL TESTING LABORATORY BLDG NO P3 CQA SV OFFICE MAIN BLDG NO P5 HALF PART AND CERTAIN RESIDENTIAL QTRS NOS P402 403 404 406 408 409 410 P351 352 353 369 OF ALKAPURI AT CQA SV DEHU ROAD PUNE UNDER GE DEHU ROAD

Custom Bid for Services - TENDER FOR STATUARY INSPECTION TESTING AND CERTIFICATION OF LPG PIPELINE AT NASHIK LPG PLANT Similar Category Maintenance and Pigging Service for Oil and Gas Pipelines Selection of Laboratories for Testing of ... Products/ Material Testing Service ...

SERVICES FOR REPAIR, ASSEMBLY AND CALIBRATION OF MAGNETIC FLOW METER, TAG NO. FR-34, FOR P2 PUMP SUCTION, ON PROPRIETARY BASIS, IN UREA PLANT,AT RCF LTD THAL, FOR ONE YEAR

Supplying of laboratory equipments for various soil, concrete and mortar Test for Main laboratory at Gosikhurd (Wahi) under Quality Control Division Wahi (Pauni)

Custom Bid for Services - Trial manufacturing and testing of C Configuration for bridging project via RFI VARTM process Similar Category Operation And Maintenance Of Other Machines And Plants Calibration Services

Calibration Services - FIXTURE FOR CHECKING OF FORCE OF CRIMPING OF SPRING OF LOCK; FIXTURE FOR CHECKING OF FORCE OF CRIMPING OF SPRING OF LOCK; NABL Labs; AS PER BUYER REQUIREMENT

Tender for supply, calibration, installation and commissioning of 02 (Two) Nos. of Gas Chromatograph and its associated equipment and piping at Sindhudurg GA and Ramanagara GA CGS locations of MNGL.

REPAIR REPLACEMENT OF HT CABLES REPAIRS TO CAPACITORS AND OVERHAULING/CALIBRATION FILTRATION OF HT EQUIPMENTS AND REPAIRS AND MAINTENANCE OF DG SETS AT NOFRA UNDER GE NW NOFRA COLABA MUMBAI

Tender for Rate Contract for a period of 2 years for calibration of Gas Detectors installed at MRS, DRS and portable gas detectors at Various site of MNGL Pune GA.

Work of repairing servicing, testing, calibration and re setting of Faulty 11 kV HT Switchgears and essential repairing work of VCB mechanism and allied works at new Globemill pumping statio

Adjustable Interchangeable Torque Wrench with spigot end classified to DIN EN ISO 6789:2003 type II Class A, with a factory calibration certificate for controlled bi-directional tightening having dual

Digital Vernier Caliper Range 0-450 mm LC 0.001 Material Stainless Steel Calibration certificate approved by NABL or other Govt. approved agencies. Offer and acceptance :INSIZE 1106-501 Digital Vernie

Digital outside Micrometer similar to MITUTOYO Cat 293-252 Range 150-175 MM, LC - 0.001mm- 01 No. Necessary Calibration Certificate from NABL/NABL Accredited Laboratory have to be submitted. Warranty

Set of Gauges for checking old Hytrel washer and Pin for bolster spring suspension with calibration certificate from NABL accredited lab & wooden carrying case with handle and closing arrangement, det

Paint Flexibility Testing Machine(conical Bend tester) for elasticity,adhesion and elongation test. It is to be used in accordance with: ASTM D522 With NABL Calibration certificate and required s

DIGITAL VERNIER CALLIPER , RANGE : 0 - 300 MM / 0 - 12" RESOLUTION: 0.01mm / 0.0005 in, MAKE : INSIZE (CODE - 1112-300) OR SIMILAR MODEL OF MITUTOYO / BAKER / TESA MAKE. CALIBRATION CERTIFICATE FOR TH

DIGITAL CBC HEIGHT MEASURING GAUGE FOR BROAD GAUGE COACH AND WAGON , MEASURING RANGE :- 930 TO 1130 MM , ACURACY :- (+-) 0.2 MM , WITH CALIBRATION CERTIFICATE ( VALDITY 12 MONTHS ) AT 1030 MM, 1090

ABSOLUTE Digimatic Depth Gauge Series 571, Range 0-300 mm, Resolution 0.01mm, ofMitutoye code 571-203-20 or equivalent Note: Firm has to submit calibration certificatefrom any NABL approved Lab.

3/4" Square Drive Torque Wrench, Ratchet Type, Capacity: 200-815 Nm, with calibration certificate from Central Govt/NABL accredited lab and as per GEM specification attached. Make: Taparia, MacMaster,

Torque Wrench, Ratchet type, 1 / 2 Inch Square drive, Range: 50-220NM, Least Count 0.5NM, Similar to MAC MASTER Model No. TW160R. Necessary Calibration Certificate from NABL / NABL ACCREDITED LABORAT

Torque wrench rachets type: - 1/2 inch square drive as per technical specification attached in Annexure A, Make-Torque master or similar(mechanical type) calibration from NABL, warranty certificate an

Wheel diameter gauge with digital display for measurement of wheel diameter in both mounted and unmounted wheels of BG (Attached specification) measuring range 600mm to 1100mm along with calibration c

DIGITAL THREE LEG INSIDE MICROMETER SIZE: 125 - 150mm, MAKE- MITUTOY OR EQUIVALENT MODEL OF BRITOOL MAKE OR BAKER MAKE WITH CALIBRATION CERTIFICATE (FIRM'S OFFER MAKE/BRAND-INSIZE) Accepted Make/Brand

Digital coating Thickness of gauge for measuring dry film thickness of Paint coating on ferrous and Non ferrous Base, along with material NABL accreditation calibration certificate to be submitted. M

Out Side Micrometer Series 340,104 with Interchangeable Anvils, Metric Model Range 300-400 mm & Resolution 0.001mm, of Mitutoyo code 340-520 or equivalent Note : Firm has to submit calibration certif

DIGITAL OUTSIDE MICROMETER ALONG WITH VALID CALIBRATION TEST CERTIFICATE TRACEABLE TO NABL CERTIFIED LABS, RANGE: 400-500MM; LC:0.001MM; MODEL:340-521 OF MITUTOYO OR ITS EQUIVALENT WARRANTY: 01 YE

Flexibility & Adhesion Apparatus for Paint testing, Bend Test- Type 1 with corrosion resistant S.S mandrel dia 6.0mm. to IS:101/(part 5/Section 2) latest & latest amendment with calibration certifica

Supply of " Snap Gauge range (175-200) mm and least count 0.001mm with digital dial indicator ". Make MITUTOYO or PRECISSION or AEROSPACE. Calibration certificate from NABL approved laboratory will b

Digital Snap Gauge With Dial Indicator. Least Count 0.001mm, Range:175-200mm, Model No.:201-108 & 543-390.Make- Mitutoyo or equivalent, with Calibration Certificate. Firm's offer: Make- PRECISION GERM

Adjustable Interchangeable Torque Wrench with spigot end classified to DIN EN ISO 6789:2003 type II Class A, with a factory calibration certificate for controlled bi-directional tightening having dual

DIGITAL COATING THICKNESS GAUGE (FOR MEASURING DRY FILM THICKNESS OF PAINT COATING OF FERROUS AND NON-FERROUS BASE), MEASURING CAPACITY RANGE 0-2000 MICRONS WITH CALIBRATION CERTIFICATE FROM NABL/GOVT

Micro processor based Automatic PH meter with accuracy of + 0.02, Temp Indicator and PH Resolution of 0.01. System to be supplied with suitable Electrode, Stand, Calibration Buffer, Maintenance Kit, O

DIGITAL VERNIER CALLIPER , RANGE : 0 - 300 MM / 0 - 12"RESOLUTION : 0.01mm / 0.0005 IN. MAKE : INSIZE (CODE - 1112-300) OR SIMILAR MODEL OF MITUTOYO / BAKER / TESA MAKE. NOTE: 1.CALIBRATION CERTIFICA

DIGITAL OUTSIDE MICROMETER RACHET STOP RANGE 125-150MM HAVING LEAST COUNT 0.001MM MAKE- MITUTOYO MAKE, OR EQUIVALENT MODEL OF BAITOOL MAKE OR BAKER MAKE ALONG WITH CALIBRATION CERTIFICATE FROM GOVERME

Digital outside micrometer measuring range 0-150 mm. Make : Mitutoyo, Insize, Brown and Sharpe, Starret or Kafer. To be procured from OEM or authorised dealer of OEM with calibration certificate.

DIGITAL OUTSIDE MICROMETER WITH RANGE 300-400 MM HAVING LEAST COUNT 0.001 MM. MAKE: MITUTOYO OR SIMILAR ALONG WITH CALIBRATION CERTIFICATE TRACEABLE TO NABL APPROVED LAB. WARRANTY CERTIFICATE SHOULD B

INSIDE MICROMETER along with valid calibration test certificate traceable to ISO/IEC 17025:2017 International standard certified labs, RANGE: 50-500mm, LC:0.01mm, MODEL: 137-208 OR ITS EQUIVALENT; WA

Digital Cum Analogue Three Point internal Micrometer with Battery Least Count : -0.001 mm, Size: 200-225 mm along with Calibration Certificate & Standard setting ring. Make: Mitutoyo or MAHR or TESA

DIGITAL VERNIER CALLIPER , RANGE : 0 - 300 MM / 0 - 12" RESOLUTION: 0.01mm / 0.0005 in, MAKE : INSIZE (CODE - 1112-300) OR SIMILAR MODEL OF MITUTOYO / BAKER / TESA MAKE. CALIBRATION CERTIFICATE FOR TH

Inside Micrometer along with valid calibration certificate traceable to ISO/IEC 17025:2017 International standard certified labs, Range: 50-500mm, LC:0.01mm, Model: 137-208 or its equivalent; Make: MI