Inspection, Testing & Audit Tenders in Maharashtra

Volatile organic vapour area monitors, Calibration kit

Procurement of Calibration gases and operational gases

Supply of PH Meter 5 Point Calibration

Electrical Conductivity meter for ATF, Calibration Unit

Black Magnetic ink spray can for MPT as [Black Magnetic ink spray can for MPT as per specification RDSO/M&C/NDT/109/2007 (Rev-2) October 2020 and as per ASTM- E-709 & IS : 6410. Firm must provide NABL accredit test certificate along with the material. Note - One quantity should be got approved before bulk supply.]

Black Magnetic ink spray can for MPT as [Black Magnetic ink spray can for MPT as per specification RDSO/M&C/NDT/109/2007 (Rev-2) October 2020 and as per ASTM- E-709 & IS : 6410. Firm must provide NABL accredit test certificate along with the material. Note - One quantity should be got approved before bulk supply.]

Annual Maintenance Contract AMC of CCD based Inductively Coupled Plasma - Atomic Emission Spectrometer (ICP-AES) in chemical quality control laboratoryof Powder Metallurgy Division, BARC, Vashi Complex Navi Mumbai-400703

COLOUR FASTNER TESTER, THICKNESS TESTER, STIFFNESS TESTER, WEIGHING BALANCE, ABRASION TESTER, UNIVERSAL BREAKING STRENGTH TESTER, ENVIROMENT TEST CHAMBER, AIR PERMEABILITY TESTER, AUTOMATIC DIFFUSION TEST APPARATUS

Digital thermometer with RTD sensor, Digital temperature indicator with k type Thermocouple, Sieve, Digital Thrmohygrometer, Auto Digital pH Meter, Glass Thermometer, Thermometer, Glass Pipette, Barometer, Density Bottle, Digital Vernier Caliper

Complete works of on-site calibration, preparation and submission of NABL calibration certificates of RTD, Thermocouples (TC), by NABL accredited calibration laboratory at 1x660 MW BHEL Site Bhusawal TPS Deepnagar, Unit-6 Maharashtra 425307.

320004-Derrick - Steel wire rope to IS: 2266/2002 32mm dia x 271 M lg. Reeled. 6 x 36 construction IWRC. Tensile strength 180kg/mm2. RH ordinary lay. Min. Breaking load 65.7 tonnes f. Both ends to be fused and tapered to pass through 35mm dia hole. ... Agency TPI . ... and TPI Agency ...

Custom Bid for Services - Annual Maintenance Contract for UTM Model No H25KS with calibration of Load Cells as per terms and conditions HEMRL IDEA GEN SPEC 2025 04 Similar Category Customized AMC/CMC for Pre-owned Products

REPAIR REPLACEMENT OF OLD DETERIOTED FAULTY LTC ABLES LT PANELS FEEDER PILLARS MCCBs ACBs REPAIR TO CAPACITORS OVERHAULING CALIBRATION FILTRATION OF LT EQUIPMENT OTHER MISC EM WORK OF MD ACCN AT OUTLAYING AREA UNDER GE (NW) NOFRA

Cube Testing Machine digital 2000 kn. Digital Cube Testing Machine with Self Calibration is a precision laboratory instrument used to test the compressive strength of concrete cubes. (IS 14858:2000) Equipment should be as per IS specification.

REPAIR REPLACEMENT OF HT PANEL BOARD HT CABLES REPAIRS TO CAPACITORS AND OVERHAULING CALIBRATION FILTRATION OF HT EQUIPMENT AND REPAIR AND MAINTENANCE OF DG SETS IN OTM ACCN OF OUTLAYING AREA UNDER GE NW NOFRA COLABA MUMBAI

TORQUE WRENCH, 1/2 INCH SQUARE DRIVE ALONG WITH CALIBRATION CERTIFICATE, MAKE TAPARIA MODEL NO TWP 160 (TORQUE RANGE 50-225 Nm) OR MAKE BRITOOL MODEL NO EVT 2000A (TORQUE RANGE 50-225 Nm) OR MAKE GROZ

Standard calibration cylindrical steel bar for UST of Axle (Size: 50 mm dia x 500 mm length), Material: 45 cg of IS 1875-1992, Rolled / Forged and normalized having grain size No. 5 or Finer to ASTME-

DIAL SNAP GAUGE 200-225MM,SERIES NO:-201-109,WITH DIAL NO 2109S-10,L.C.0.001 MM AS A SET WITH CALIBRATION CERTIFICATE TRACEABLE TO NPL/NABL.WARRANTY/GUARANTEE OF 12 MONTHS FROM THE DATE OF DELIVERY (O

Gauge for Pin on Draw Hook. Required size: NOGO - 58 mm (Snap Type) Ref. Drg. No. RDSO- SK - 79068 Alt-08 & SK- 99002 Material - Tool Steel, IS 3748/90 Hardness - 50/55 HRC. Supply with Calibration C

STANDARD CALIBRATION STEEL BAR FOR UST OF RAILWAY AXLES SIZE: 50 mm DIAMETER X 500 mm LENGTH MATERIAL: 45C8 OF IS 1875-1992 OR LATEST, ROLLED/FORGED AND NORMALISED HAVING GRAIN SIZE NO. 5 OR FINER TO

Template to check control arm silent block of FIAT Bogie(LHB); Ref: Drg No. J&T/JUDW/16- 621. Material cold work tool steel to IS:3748/90, Hardness 50/55 HRC. Supply with calibration certificate issue

INDUSTRIAL X-RAY FILM OF SIZE 14" X 17", TYPE HIGH SPEED, FINE GRAIN, HIGH CONTRAST EQUIVALENT TO NDT

1 103 E 4003 DIH Hexane Bottom reboiler Design Procurement supply of all materials fabrication assembly at shop NDT SR surface preparation primer, 2 103 E 4004 A B DIH Hexane Bottom reboiler Design Procurement supply of all materials fabrication ... shop NDT SR ... shop NDT SR ... shop NDT SR ... shop NDT SR ...

Annual Maintenance Contract of Flame Atomic Absorption Spectrometer (FAAS), and Graphite Furnace Atomic Absorption Spectrometer (GFAAS) in chemical quality control laboratoryof Powder Metallurgy Division, BARC, Vashi Complex Navi Mumbai 400703

Clinical chemistry calibration serum A, Assayed Chemistry Control A, Clinical chemistry calibration serum B, Assayed Chemistry Control B, Assayed Chemistry Control C

Procurement of calibration fixtures for flex-Pli impactor

Custom Bid for Services - ANNUAL RATE CONTRACT FOR OEM SPECIFIC PREVENTIVE MAINTENANCE CALIBRATION FOR 3D CO ORDINATE MEASUREMENT CMM MACHINE MODEL G90CS SUPPLIED BY LK LONDON OF THREE YEARS Similar Category Customized AMC/CMC for Pre-owned Products

Custom Bid for Services - NON COMPREHENSSIVE CALIBRATION MAINTAINANCE CONTRACT ON YEARLY BASIS FOR ROBOTIC ULTRASONIC TESTING MACHINE OJ6091 FIRM WILL VISIT THE OFAJ TO EXECUTE THE WORK AS MENTIONED IN SCOPE OF WORK ENCLOSED HEREWITH AS ANNEXURE A

Customized AMC/CMC for Pre-owned Products - COMPRENSIVE MAINTENANCE CONTRACT FOR CALIBRATION SERVICING AND MAINTENANCE OF OJ 5681 UNIVERSAL LENGTH MEASURING MACHINE ON HALF YEARLY BASIS THE DETALS OF WORK MENTIONED IN THE ENCLOSED ANNEXURE OJ 5681; C..

COMPREHENSIVE MAINT OF DG SETS WITH INCLUDING REPLACEMENT OF FUEL FILTER OIL FILTER AIR FILTER CALIBRATION OF NOZZLE SYSTEM REPLACEMENT OF AVR DISPLY BOAD REWINDING OF ALTERNATORS OF DIFFERENT CAPACITY MAINT OF AMF PANEL LT PANEL TIMER SWITCH

Custom Bid for Services - Non comprehensive AMC for Hydraulic Press with oil heated Pletan and Calibration of its measuring instrument Similar Category Operation And Maintenance Of Other Machines And Plants Operation and Maintenance Of Electrical Systems/Electrical Installations

Standard Oil S21, 100ppm OIL BASED METAL CALIBRATION STANDARD FOR USE WITH SPECTROMETER, CONTAINING ELEMENTS : Ag, Al, B, Ba, c, Ca, Cd, Cr, Cu, Fe, Mg, Mn, Mo, Na, Ni, P, Pb, Si, Sn, Ti, V, Zn. WITH

A set of standard gas mixture for calibration of DGA. 10 ltr capacity Aluminum can with nozzle and screw fine control valve on to outlet valve on top of the can to obtain required gas flow with regula

: A set of standard gas mixture for calibration of DGA. 10 ltr capacity Aluminum can with nozzle and screw fine control valve on to outlet valve on top of the can to obtain required gas flow with regu

Custom Bid for Services - Combined Scope of Work for supplying of 20 KVA Soundproof Generator and fabrication on Tata Yodha Vehicle Part A AND Fabrication of Film Shooting Light Equipment Carrying Truck Part B Similar Category Calibration Services

Repair and Maintenance of Plant/Systems/Equipments - Manufacturing Unit; Biennial rate contract for calibration repair of vibration data logger SPM A4011 and its accessories at RCF Trombay unit AS PER SCOPE OF WORK; AS PER SCOPE OF WORK

Repair and Maintenance of Plant/Systems/Equipments - Industry Unit; CONTRACT FOR MAINTENANCE AND CALIBRATION SERVICES OF MULTI GAS METERS IN CC LAB AT RCF THAL WITH MS DETECTION TECHNOLOGY PVT LTD ON PROPRIETARY BASIS FOR TWO YEARS; Buyer

Custom Bid for Services - TWO YEARS ANNUAL MAINTENANCE CONTRACT FOR CALIBRATION OF MASS FLOWMETERS OF MUMBAI URAN PIPELINE Similar Category Customized AMC/CMC for Pre-owned Products Repair, Maintenance, and Installation of Plant Systems/Equipments (Version 2) Customized AMC/CMC for Pre-owned Products Repair, Maintenance, and Installation of Plant Systems/Equipments (Version 2)

Dear Vendor, kindly not following points 1. kindly quote rate in unit rate basis without GST 2. GST will be added later after opening of tender Nitin more

Custom Bid for Services - ANNUAL MAINTENANCE CONTRACT AND CALIBRATION OF OLYMPUS MAKE INVERTED METALLURGICAL MICROSCOPE MODEL GX51 RFI REGD NO 12960 ON WHOLE JOB BASIS AS PER ANNEXURE I DATE 11 02 2025 Similar Category Repair and Overhauling Service

Mechanical wheel diameter gauge (folding type) for measurement of wheel measuring range:800 to 1000 mm, m-type, least Count:0.1 mm for B.G. coaches along with calibration certificate and packed in storage wooden box, as per annexure-I.

Custom Bid for Services - REPLACING OF EXISTING CONTROL PANEL OF CNC UNIVERSAL LENGTH MEASURING MACHINE MODEL NO OPAL 600 MPF NO3374 IN QC SECTION WITH INTERFACING HARDWARE AND INTEGRATION OF GAUGE CALIBRATION SOFTWARE AS PER ANNEXURE SCOPE OF WORK

Custom Bid for Services - NON COMPREHENSIVE MAINTENANCE CONTRACT ON YEARLY BASIS FOR PC BASED PROFILE PROJECTORS INVCQCII85 AND INVBQCIM241 A VISIT FOR MAINTENANCE CALIBRATION ONCE IN A YEAR FOR EACH MACHINE AS PER SCOPE OF WORK MENTIONED IN ATTACHE..

Repair/maint of HT Electric System HT pole stays ACSR conductors chain links anti climbing devices GODs DO fuses overhauling of VCBs calibration of VCBs MCCBs prunning of trees painting of poles lt panels earthing for E/M installations

REPAIR REPLACEMENT OF HT CABLES REPAIRS TO CAPACITORS AND OVERHAULING CALIBRATION FILTRATION OF HT EQUIPMENTS AND REPAIRS AND MAINTENANCE OF DG SETS AND OTHER CERTAIN MAINT WORK AT VARIOUS LOCATIONS AT NOFRA AREA UNDER GE NW NOFRA COLABA MUMBAI

Profile checking gauge (K value & P valu [Profile checking gauge (K value & P value) along with feeler gauge, as per annexure attached along with calibration certificate issued from NABL approved lab. 01 set consists of 06 items 06 Nos.]

Set of spares of PH/EC/TDS 3 in 1 combo tester as per Annexure-A attached. Note- Calibration certificate from any source/Lab should be furnished by the firm. One set consist of seven items in seven no

Profile checking gauge (K value & P valu [Profile checking gauge (K value & P value) along with feeler gauge, as per annexure attached along with calibration certificate issued from NABL approved lab. 01 set consists of 06 items 06 Nos.]

Custom Bid for Services - Testing and Calibration of Motor Protection Relay at Nashik LPG Plant Similar Category Operation And Maintenance Of Electro-Mechanical Installations Operation and Maintenance Of Electrical Systems/Electrical Installations Operation and Management Service of Electrical Buses

BAND SAW BLADE M42 GRADE, SIZE: 4100 MM X 34 MM X 1.1 MM AND PITCH= 2/3 TPI. MAKE-MIRANDA, BAHCO, LENN