Inspection, Testing & Audit Tenders in Tamil Nadu

Movable Plate Gauging Gauge for MK-50 Draft Gear as per Drg. No.BE-91/61-10 with calibration certificate.

Custom Bid for Services - AMC and Calibration of w plus b 250kN and 600kN machines Similar Category Support Services

HEXAGONAL LOCK NUT 1 1/8 INCH X 12 TPI to EMD part no 8358553 OF SHAKTHI / DEL PD / EMD / Dynamatic Technologies Only. Child parts of Scavenge Lube Oil Pumps. Firms Offer: --do-- Firms Own Make

E&F TRAVERSER DOUBLE FLANGED WHEEL LONG TRAVEL AS PER DRAWING NO PD/GOC (SR) PLT-1610. MATERIAL IS 1875 CL IV HARDNESS 300-350 BHN. MATERIAL TESTING CERTIFICATE FOR CHEMICAL COMPOSITION & HARDNESS TES

Repair and Overhauling Service - built up trucks; CALIBRATION OF FUEL FLOW BULK METER AGAINST 105; No; Buyer Premises, Service Provider Premises

REPAIR PERIODICAL MAINT CALIBRATION OF VCB TRANSFORMER RMU TWO FOUR POLE STRUCTURE PROTECTIVE GEARS AND OTHER MISC WORKS AT AFS SULUR

CONSTRUCTION OF MICROBIOLOGICAL LABORATORY OVER EXISTING QUALITY CONTROL LABORATORY AT COIMBATORE DCMPU LIMITED

Erection, alignment, welding, NDT, fixing of Hangers,supports, flushing, hydrotesting including fabrication of Structural Steel, pipe supports etc, supply and application of primer, finish paints for Secondary Cycle Piping System and all Associated P

Custom Bid for Services - onsite calibration of Honeywell Make Fixed Hydrocarbon detectors at Dharmapuri receiving station as per attached specifications

Calibration Services - CALIBERATION OF PARTICLE COUNT MACHINE; CALIBERATION OF PARTICLE COUNT MACHINE; CALIBERATION OF PARTICLE COUNT MACHINE; Buyer premises (onsite)

Custom Bid for Services - Calibration of Portable Skid Resistance Tester with replacement of 03 rubber sliders Make MUNRO STANLEY LONDON

Repair and Overhauling Service - built up trucks; CALIBRATION OF FUEL FLOW BULK METER AGAINST 86 & 100; No; Service Provider Premises

MTPS I OAHS Servicing Calibration and stamping of 1 No 100 tonne capacity electronic weigh bridge installed at silo area

Set of Four Nos of Standard Calibration Gas Mixture for Dissolved Gas Analyzer with Regulator Nozzle Fine control 0.5 litres

Outer Stationary Plate Gauge for MK-50 Draft Gear as per Drg. No. BE-91/61-3 with calibration certificate.

Set of Adapter bore gauges consisting of 02 items with calibration certificate from NABL approved lab as per Annexure - A.

Pedestal Jaw (Short) Gauge for Casnub-22NL, 22NLB, 22HS Bogies. As per Fig 33 of G-95. with calibration certificates

Barometer as per detailed technical specification attached . Offer accepted Model: HTC AL-7010 of HTC Instruments alongwith NABL Calibration Certificate.

Custom Bid for Services - CALIBRATION OF LOAD TESTING MACHINES AVAILABLE AT LIFTING TACKLES SECTION BHEL TRICHY USING SUITABLE PROVING RINGS

Set of Four Nos of Standard Calibration Gas Mixture for Dissolved Gas Analyzer with Regulator Nozzle Fine control 0.5 litres

Set of Four Nos of Standard Calibration Gas Mixture for Dissolved Gas Analyzer with Regulator Nozzle Fine control 0.5 litres

Custom Bid for Services - SERVICING OF WIKA MAKE MULTI- FUNCTION CALIBRATORS USED IN GAIL CAUVERY BASIN Similar Category Calibration Services

High speed steel (HSS) tangential chaser dies 4 inch x 1 1/4 inch x 11 TPI BSPT, Die set consisting of 4 Nos. Material to be certified by Govt approved metrological lab Make:TTC/Emerson/Nbeson. Firm

Cap Nut to size 7/16 inch - 20 TPI (UNC - 2B) thread and length of 45/64 inch as per specification No. TPL -0253 for HHP Diesel locomotives. Note: Material - Low carbon steel forging. Firm's offer : S

Custom Bid for Services - Repair service and calibration of Digital Pressure gauge SM 54 Similar Category Repair, Maintenance and Installation of Plant Systems/Equipments

VGTPS Phase II Carrying out Routine maintenance and Calibration of all instruments and equipments in MRT sub-division for the period from 01.10.2020 to 31.03.2021

Providing Road furnitures in Sriperumbudur H CandM Sub Division Jurisdiction CHN 049

Providing Road Furniture Bus Lay By Repairs to the Damaged Metal Crash Barrier and Thermoplastic Painting Works in Chengalpattu H CandM Sub Division Jurisdiction. CHN 051

Providing Road Furniture and Thermoplastic Painting Works in Chengalpattu andduranthagam H andM Sub Divisions Jurisdiction. CHN 053

Establishment of Labs with Procurement of Laboratory instruments and Construction of Quality Control Lab Buildings for 4 Nos of Quality Control Sub Divisions at Salem, Dharmapuri, Thanjavur and Thiruvarur. (Procurement of Lab Instruments only)

Custom Bid for Services - STATUTORY INSPECTION NDT AND HYDROTESTING AS PER SMPV RULES FOR 650 MT X 3 Nos AND 1350 MT X 1 No HORTON SPHERE LPG STORAGE VESSELS AT BPCL COIMBATORE LPG PLANT

HEX.NUT ZINC PLATED OR PHOSPORATED 1/2"- 13 TPI .MATERIAL TO BS: 1768 Gr 1/IS : 1367/P.P.CL.8.8, THREAD FIT : UNC 2B OF BS : 1580/ANSI.B.1.1 Firms' offer: Same as above, Make/Brand: Any good make

(A)HEX. HD. BOLT 1"-8 TPI X 3" LONG WITH ONE LOCK WASHER, BOLT TO MATL. SPECN. AND PROPERTY CLASS 1S1367 (PART-III) CLASS 10.9 / B.S:1768 GRADE "V" / SAE - GRADE.8. USED FOR COMPRESSOR FOUNDATION. (B)

Custom Bid for Services - RECALIBRATION OF ALL STORAGE TANKS AT KARUR RECEIVING TERMINAL AND CERTIFICATION FROM CPWD Similar Category Calibration Services

Calibration Services - VIBRATION MEASURING KIT; VIBRATION MEASURING KIT; Any other Government Approved Labs/Service Provider; Hybrid (detailed in scope of work)

ANGULAR POSITION TRANSMITTER FOR PA FAN AS PER SPEC: TECI: GEN: APT: REV 02 CALIBRATION FROM 0 TO 180 DE (Q3)

Calibration Services - VIBRATION MEASURING KIT; VIBRATION MEASURING KIT; Any other Government Approved Labs/Service Provider; Hybrid (detailed in scope of work)

Tender for Onsite Calibration of 33 KV / 11 KV Metering Sets, 0.2S Class DLMS Energy Meters including Transportation, Liaisoning etc Complete

Custom Bid for Services - Calibration and Certification of various measuring instruments as per the enclosed scope of work at MAPS Site

Custom Bid for Services - Service Contract for Annual maintenance and calibration of mechanical testing equipment at MTL section of Plant laboratory

Custom Bid for Services - Onsite Testing of Relays and Calibration of Measuring Instruments at Surface Installations Cauvery Asset for 3 Years

Calibration of ABT maters, Current Transformer and Potential Transformers available in 110 kV EB Metering bay of TSS under Madurai Division

Renovation of record room of F and A division and calibration lab of M and T section of NIWE Pallikaranai Chennai

Customized AMC/CMC for Pre-owned Products - CALIBRATION SERVICES; AVER INDIA EQUIPMENT MAKE WEIGH BRIDGE; Annual Maintenance Contract (AMC); Quarterly; Yes

V1 IIW System Evaluation Block, Nickel Plated Digital Ultrasonic Tester Calibration Probe. MAK/BRAND : EEC --FIRM's OFFER:SAME AS ABOVE-MAKE:OEM/EEC

BSS Hanger block inner gauge (ICF Coach) as per Drg. TSO NO. 02/2010 dated 12.05.2010. supply with approved calibration certificate.

OVERHAULING, CALIBRATION AND FITTMENT OF POWER CAR HYDRAULIC TYPE FUEL PUMP TO CUMMINS PART NO. JNFP1001010. Firm's Offer : Make/Brand : CUMMINS

Custom Bid for Services - SERVICE CONTRACT FOR CALIBRATION OF BOILER PG TEST INSTRUMENTS FROM NABL ACCREDITED INSTITUTIONS LABORATORIES FOR 2023 2025 Thermocouples K type, Custom Bid for Services - SERVICE CONTRACT FOR CALIBRATION OF BOILER PG TEST ... FOR CALIBRATION OF ... FOR CALIBRATION OF ... FOR CALIBRATION OF ... FOR CALIBRATION OF ... FOR CALIBRATION OF ... FOR CALIBRATION OF ... FOR CALIBRATION OF ... FOR CALIBRATION OF ... FOR CALIBRATION OF ... FOR CALIBRATION OF ... FOR CALIBRATION OF ...

FILLING OF CALIBRATION GAS MIXTURE OF HYDROGEN 2% AND BALANCE AIR IN NPCIL CYLINDERS OF 10L CAPACITY (Q3), HYDRO TESTING AND PAINTING OF CYLINDERS (Q3)

TANK WAGON LOADING GANTRY BATCH CONTROL UNITS, TANK WAGON GANTRY FLOW METERS MS, HSD, ATF, PROVER VESSELS 2KL AT TANK WAGON LOADING GANTRY, TANK LORRY FILLING GANTRY BATCH CONTROL UNITS, TANK LORRY FILLING GANTRY FLOW METERS MS, HSD, SKO, ATF, MASS ... SKO, CALIBRATION TOWER ...