Inspection, Testing & Audit Tenders in Tamil Nadu

Steel Ratchet Type Torque Wrench of Range 25-135 NM of make POWERTORQ or GRIPHOLD OR ZYLOK only with NABL accredited Calibration certificate.

KNUCKLE BOTTOM PULLING LUG GAUGE as per RDSO G 80 Manual(Gauge No-11) Supply with calibration certificate issued from NABL approved lab

Set of Stucki PowRGaurd XE Draft Gear maintenance Gauges as per attached Annexure-1, along with calibration certificate from Govt./NABL approved firm.

Custom Bid for Services - Service Contract for calibration of I/H converters of TDBFPs of NTECL Vallur Similar Category Repair, Maintenance and Installation of Plant Systems/Equipments

Customized AMC/CMC for Pre-owned Products - Hardness tester; Service Charges for AMC With Calibration for Equotip 550 UP01 003 1772 and UP01 006 0648 with Portable Rockwell Probe and Issue of Calibration Certificate as per DIN 50157 2 With Traceabil.., Customized AMC/CMC for Pre- owned Products - Proceq Portable Hardness tester; Additional Breakdown Visit beyond one included visit covered under AMC; Annual Maintenance Contract (AMC); Annually; Yes

Comprehensive Maintenance for Air conditioning and 1000 Class Clean room Facility, Operation of Clean Room and Calibration of Clean room Equipments and Instruments

High tensile socket headed cap screw of grade 10.9 to IS 1364 part 2 of size 3/8? x 16 tpi x 1-3/4" length of make TVS /UNBRAKO / DFL / PFL only. firms offer: SAME AS ABOVE BUT GRADE 12.9 BSW

High tensile hexagonal bolt of size 3/4 inch dia X 3 1/2 inch length 10 TPI half threaded 8 grade to part number 170453 of M/s. Unbroko. Make: TVS/UNBRAKO/LPS/GKW/DFL /PFL/GKM Firm's Offer : Same as a

Custom Bid for Services - ONETIME SERVICING AND CALIBRATION OF OLYMPUS MAKE METALLURGICAL MICROSCOPES 02 Numbers MODEL NO BX51M MODEL NO BX61M AT BHEL TRICHY

Custom Bid for Services - AMC FOR CALIBRATION OF NRG MAKE METEOROLOGICAL SENSORS TO BE CARRIED OUT ONCE IN YEAR FOR TWO YEARS TIME PERIOD

81392 REPAIRS/MAINTENANCE OF HT EXTERNAL SUPPLY, HT INFRASTRUCTURE,CALIBRATION OF VCBs, RMUs, PAINTING OF TRANSFORMERS AND CONNECTED WORKS AT TIRUNELVELI UNDER GE TIRUNELVELI

81411 REPAIR / MAINT OF HT EXTERNAL SUPPLY HT INFRASTRUCTURE CALIBRATION OF RELAYS RMU S AND CONNECTED WORKS TECH AREA AT KATTABOMMAN UNDER GE TIRUNELVELI

Procurement of 1 No of Portable Three Phase Reference standard Meter HT LT combined 0.05 class accuracy with NABL Calibration certificate in VILLUPURAM EDC

Procurement of 1 No of Portable Three Phase Reference standard Meter HT LT combined 0.05 class accuracy with NABL Calibration certificate in VILLUPURAM EDC

Custom Bid for Services - Annual Rate Contracts for Calibration and Maintenance of Hydrocarbon detectors and Portable Multigas Detector for SRPL Locations Liquid Product Pipelines

Calibration Services - As per Scope of Work; As per Scope of Work; NABL Labs; As per Scope of Work and Special conditions of Work

Calibration Services - Statutory Testing and Certification of 4 Nos of Safety Valves of Liquid CO2 tank; Pressure; CCOE; Hybrid (detailed in scope of work)

Special Repairs to Workstations and other works in Quality Control Office at PWD campus Chepauk Chennai 05

Custom Bid for Services - Laser Calibration of Table in HB633 and Nomura Horizontal Boring machines at BHEL Trichy Similar Category Repair, Maintenance and Installation of Plant Systems/Equipments

Custom Bid for Services - Repair and Service and Calibration of Industrial Video Scope IRIS DVR5 at Supplier Facility Similar Category Repair, Maintenance and Installation of Plant Systems/Equipments

Onsite Calibration Of Online Hydrogen Gas Detectors (8 Channel) . Make Endee. Model No ENDEE 8420 ( 4 set ), Supply And Safe Delivery Of A 3-Wire LEL Hydrogen Transmitter Card Suitable For Endee Make Sensor, M

Customized AMC/CMC for Pre-owned Products - AMC AND CALIBRATION OF ZWICK ROELL MACHINES AT PLANT LAB, BHEL-TRICHY FOR 2025-2027; As per NIT; Annual Maintenance Contract (AMC); As per Schedule given in NIT; Yes

Providing Immediate Measures under Road Safety audit for 2023 24 in State highways Roads in Tirupur H C and M division Jurisdiction TPR 071

Providing immediate measures based on the Road Safety Audit in the State Highways Tiruvarur - Kudavasal - Kumbakonam road at Km.0/0 - 10/0 (SH65)

MTPS I M II OAHS SD III SILO Servicing Calibration and stamping of one no 100 tonne capacity electronic weigh bridge installed at silo area

Calibration Services - Walky talky License Renewal for 3 years at VEL GARC; Defined in Scope of Work; License renewal; Hybrid (detailed in scope of work)

TTPS ES Circle Instn II Removing cleaning and assisting for calibration of all field instruments in Pneumatic Lab and other related works during Unit IV

Calibration of Cl2 and SO2,Methane gas detection Transmitters in Energy, Clo2, HW, ECF Plants and Instrumentation workshop at Pulp - Instrumentation in TNPL Unit I

CANNON-FENSKE, OPAQUE VISCOMETER SIZE-150, WITH TUBE FACTOR FOR TESTING KINEMATIC VISCOSITY OF LUBE OIL @100 DEGREE CELCIUS with OEM calibration make brand: GLOBOLYTICS

Canon Fenske, opaque viscometer, Size 350, Reverse flow with minimum flow of 200 seconds for testing of oils @ 40 degree C . with NABL calibration certificate

BLUE colour history for calibration of IMTE as per format MCM/F/009 of size 250 GSM x 210mm x 320 mm for shop 41

Lock Parallel and Thickness Gauge as per Drg. No. WD-84073- S-59- RC. The gauge must be supplied with calibration certificate. Accepted Make:GANAPATHY CHENNAI

GUARD ARM GAUGE-GAUGE NO. 3 (FIG. -23) OF G-80 TECHNICAL PAMPHLET FOR ACCEPTANCE OF RECONDITIONED CBC. WITH CALIBRATION CERTIFICATE. make - similar.. Make/ Brand

CBC LOCK THICKNESS AND PARALLEL GAUGE RD. VIDE RDSO DRG. NO. WD-84073-S-59-RC AND SUPPLY WITH CALIBRATION CERTIFICATE. MAKE/MODEL: GANAPATHY CHENNAI

BOLT HEX HEAD 1/2 INCH X 13 TPI X 3.5 INCH LONG, FULL THREAD, UNC-2A, STEEL CL-8.8 TO IS: 1367, ZINC PLATED FOR FIXING CLEAT IN DPC/DEMU, QTY-16 NOS ALONG WITH a) SUITABLE FLAT ROUND WASHER QTY-32 NO

HEX.HD. BOLT 5/8" x 11 TPI, UNC x 2 1/4" LONG (FULLY THD) PL NO. 15347370 TO BS:1768 GRADE 'S WITH ONE NUT, AND ONE SPRING WASHER TO IS.3063/72 FOR ALCO B.G. LOCOS. THREADS: ROLLED, UNC-2A SERIES, AS

Custom Bid for Services - LUMPSUM AMOUNT TO BE QUOTED CONSIDERING 1700 FULL MANDAYS OF TPI OF RETAIL OUTLETS BOTH AT THE OUTLETS AS WELL AS VENDOR PREMISES AS DETAILED IN THE TENDER DOCUMENT BASED ON THE LUMPSUM AMOUNT QUOTED PER MAN DAY RATE WILL BE..

helmet combat fiberglass Helmet Combat Fiberglass ( 220 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Conformity to Defence Sepecification No. IND/GS/1684(c) Yes - Sepecification No. IND/GS/1684(c) ... of quality Assurance (general ...

Short term measures based on Road Safety Audit for Providing Road Furnitures and Road Marking to Government Roads in Dharmapuri (H) Division (CandM) (SLM-122)

Short term measures based on Road Safety Audit for Providing Road Furnitures and Road Marking to Government Roads in Krishnagiri (H) (CandM) Division (SLM-121)

Short term measures based on Road Safety Audit for Providing Road Furnitures and Road Marking to Government Roads in Edappady (H) (CandM) Division (SLM-119)

Short term measures based on Road Safety Audit for Providing Road Furnitures and Road Marking to Government Roads in Salem (H) (CandM) Division (SLM-118)

Short term measures based on Road Safety Audit for Providing Road Furnitures and Road Marking to Government Roads in Namakkal (H) (CandM) Division (SLM-120)

REFER ANNEXURE-I IN NOTICE INVITING TENDER

4102900013 POWER MACHINE HACK SAW BLADEIS 2594 1977SIZE 400 X 32 X 1.6 X 4 P 6 TPI HSS IS 2594 1977, 4102900051 BLADE HAND HACKSAWSIZE 300 X 12.5 X 0.63 X 1 P 24 TPI HSS IS 2594 1977 24TPI, 4102900052 BLADE HAND HACKSAW HSSSIZE 300 X 12.5 X 0.63 X ... 14 TPI HSS ... 14 TPI , ... 32 TPI , ... M42 TPI 3 ... 4 TPI 3 ...

81412 REPAIR/ MAINTOF HT EXTERNAL SUPPLY HT INFRASTRUCTURE CALIBRATION VCB s PAINTING OF TRANSFORMER AND CONNECTED WORKS AT INS KATTABOMMAN AND RS P UNDER GE TIRUNELVELI

A set of Gauges of CASNUB Trolley / Bogies as per RDSO Technical Pamphlet No. G -95 with calibration certificate. Details as per Annexure-A. MAKE - GANAPATHY

ASSEMBLED DRAFT GEAR (GO)GAUGE FOR RF-361 DRG NO.-27739 OF M/S-BESCO Maintenance Manual Supply with calibration certificate issued from NABL approved lab

10-A Contour Gauge for CBC inspection. As per RDSO Drg. No. WD-84073-S-1-RC. Supply with calibration certificate issued from NABL approved lab

Description: Digital Micro Ohm meter with back emf protection type to Motwane Model No.LR 2045S (Microprocessor base) with accessories.Make:- Motwane/Fluke/ agilent with calibration certificate Tracea