Inspection, Testing & Audit Tenders in Tamil Nadu

CBC LOCK THICKNESS AND PARALLEL GAUGE RD. VIDE RDSO DRG. NO. WD-84073-S-59-RC AND SUPPLY WITH CALIBRATION CERTIFICATE Make -similar Make/Brand:-GANAPATHY

PROFILE GAUGE 27MM AS PER DRAWING NO -SKETCH-92082 offered make:GANAPATHY CHENNAI(FIRMS OFFER SUPPLY WITH CALIBRATION CERTIFICATE ISSUED FROM NABL APPROVED TEST LAB WITH TRECAEBILOTY

Custom Bid for Services - CC031123 Revisioning Testing and calibration of the Pressure Safety valves temperature safety valves during DCU DHDS RefII MI Shudtown2024 at CPCL Manali

Sub Work for Construction of Quality Control Building at Thandarampattu (H) (C and M) Subdivision Office in Tiruvannamalai Division

Special Repairs to AEs Office, Establishment section of Quality Control in main building at PWD campus, Chepauk, Chennai-5.

SERVICE CONTRACT FOR INSPECTION (QUALITY CONTROL) SERVICES FOR OUTSOURCED BOILER NON PRESSURE PARTS OF BHEL, TRICHY DURING 2022-23

HEXAGONAL HEAD CAP SCREW 3/8 INCHES -16 TPI UNC-2A X, 1- 1/4 INCHES LONG TO DLW DRG NO. TPE-13-0044 S NO. 20 ALT U. MATERIAL SPECN:- IS:1367 (PT:III) CLASS 8.8 (OR) BS 1768-GR 'S' (OR) SAE GR.5 (2) TH

Calibration Services - FOR FLOW METER AND OXYGEN ANALYZER; FOR FLOW METER AND OXYGEN ANALYZER; Any other Government Approved Labs/Service Provider; Hybrid (detailed in scope of work)

Custom Bid for Services - Servicing and calibration of Motorized Inverted Metallurgical Microscope through Annual Maintenance Contract for a period of one year Model DMi8A and Make Leica

Custom Bid for Services - Servicing and Calibration of Universal Testing Machine through Annual Maintenance contract for a period of one year OFT2493 ModelMake FIE Capacity 10 TON

Pressure gauge with 4 inch dial and 0 - 2.5 kg/cm2 (30 PSI) range with 1/4 inch BSP bottom connector with calibration certificate (Warranty - 12 months)

Adjustable Type Air Spring Height Measuring Gauges (GO & NO GO) As per Drawing No. SK-ASG. 1/2019, Supply with calibration certificate. ACCEPTED MAKE/BRAND - GANAPATHY CHENNAI

Design, Manufacture, Supply, Installation, Prove-out and Commissioning of Arc Validation Equipment for Welding Machine Calibration as per specification enclosed. FIRM'S OFFER : AS ABOVE MAKE/BRAND KEM

Friction Wedge Wear Gauge for BOST Bogies to Drawing No J&TD.CW.PER.SR.DRG No. G-55, Supply with Calibration Certificate issued from NABL Approved Lab for 12 months.

Custom Bid for Services - Conducting Photometric Field test for Airfield Ground lighting and report submission Similar Category Operation and Maintenance Of Electrical Systems/Electrical Installations Calibration Services

Custom Bid for Services - Development of area adjacent to Fire water tank for movement of Tank lorries for safety check & calibration Similar Category Repair, Maintenance and Installation of Plant Systems/Equipments

Special Repairs to common toilet and other works to Quality Control in main building at PWD campus, Chepauk, Chennai-5.

Special Repairs to compound wall and other works to Quality Control in main building at PWD campus, Chepauk, Chennai-5.

Special Repairs to EE chamber and other works to Quality Control in main building at PWD campus, Chepauk, Chennai-5.

Tilting Scrrew Nut, 2 TPI as per CFA DRG No. 12 P 078

Custom Bid for Services - Replacement of the metallic bellows of the main steam pipe line of Size 1420mm Thickness 14 mm which involves Preparation of the edge for welding and new bellow using GTSW or SMAW along with NDT checks Sch Qty 2 Nos

Set of Ni-Cr Test Panels (2 Panels: A & B with Crack Profile Photographs)conforming to ISO 3452-3:2013(E) and RDSO/M&C/NDT/106/2007 (Rev-2, Oct-2020). 1.Ni-Cr test panels of 10 microns - 01 set, 2.Ni

Customized AMC/CMC for Pre-owned Products - AMC including calibration for Universal Testing Machine; AMC for ITW equipment; Annual Maintenance Contract (AMC); Every four months per year; Yes

MTPS I M II OAHS SD II Maintenance Servicing Calibration and Stamping of 2 nos 100 tonne capacity AVERY make electronic weigh bridge installed at ash dyke area

TTPS ES INSTN II Removing cleaning and assisting for calibration of all field instruments in Pneumatic Lab and other related works during Unit IV Annual overhaul 2024 2025

TTPS ES INSTN I Removal cleaning calibration and re fixing of level switches BTH S and other instruments for annual overhaul 2024 2025 in unit III turbine area

TTPS ES INSTN II Removing cleaning and assisting for calibration of all field instruments in Pneumatic Lab and other related works during Unit IV Annual overhaul 2024 2025

Customized AMC/CMC for Pre-owned Products - AMC and Calibration of INSTRON 1000KN UTM for 2025-27; As per NIT; Annual Maintenance Contract (AMC); As per NIT; Yes

Digital Analytical Balance in-built with auto calibration suitable for laboratory capacity: 220gm., Readability: 0.1mg., pan size: 90mm dia., Stabilization time: 3sec. And operated with power supply o

Master setting gauge for dial snap gauge. Size (O.D.) -: 144.000mm (+,- 0.002). Thickness -: 40mm. Material cold work tool steel, hardness -: 60/65 HRC. Supply with calibration certificate - Issued f

LIGHT WEIGHT ALUMINUM STRAIGHT EDGE OF SIZE 4000 MM TO BE SUPPLIED WITH CALIBRATION CERTIFICATE TRACABLE TO NATIONAL STANDARD AS PER DETAILED SPECIFICATION ENCLOSED I SECTION (PARALLEL TYPE)

Digital Wheel Diameter gauge - Measuring range 800mm to 1010mm, measuring Accuracy +/- 0.2mm, Least count 0.01mm with calibration certificate for BG wheel. Jyoti, Ganapathy or any similar Firm. Make :

Procurement of Digital Welding Throat Gauge, Specification equivalent to Model no. SWPS 20 of SWPS Make. MAKE: SWPS, INSIZE, MITUTOYO, FREEMANS ,KRISTEEL or equivalent. Note: Valid Calibration certifi

4000200110 FRAME HAND HACKSAW CLOSE GRIPADJUSTABLE WITH WOODEN HANDLE STANDARD SIZE 200MM 300MM 8 12, 4000200111 FRAME HAND HACK SAW SOLID200 TO 300MM ADJUSTABLE WITH WOODEN HANDLE, 4102900039 BAND SAW BLADE 4860X34X1.1 MM ENDLESS 4 6 TPI BI ... 24 TPI HSS, ... M42 TPI 3 ... RECTANGULAR TPI 3 ... M42 TPI 2 ... RECTANGULAR TPI 2

Custom Bid for Services - Servicing and Calibration of Diesel Pump and Injector Unit used in the Cummins Make Diesel Engine for FPS Similar Category Repair, Maintenance and Installation of Plant Systems/Equipments

LAB EQUIPMENTS FOR CIVIL DEPARTMENT CONSTRUCTION PRACTICE LAB AND MATERIAL TESTING LAB

Service of Torison testing machine in material testing lab of civil dept.

Sub Work for Construction of Quality Control Lab at Thiruppathur H CandM Sub Division office Campus of Sivagangai H CandM Division

Custom Bid for Services - Carrying out UTG of secondary cycle piping components and NNPV Performing QC inspection by NDT etc Item No 1 Carrying out UTG of piping components and equipments the scope of work includes pre cleaning of the piping ... by NDT QTY ...

Custom Bid for Services - Carrying out UTG of secondary cycle piping component and NNPV and Performing QC inspection by NDT and provide assistance for QC activitie etc ITEM NO 1 Carrying out Ultrasonic thickness gauging of piping components etc.., ... by NDT refer ...

C23M26R214 - 8170156753 - Portable Multi Gas Detector, WARRANTY CALIBRATION CHARGES 1ST YEAR, WARRANTY CALIBRATION CHARGES 2ND YEAR, WARRANTY CALIBRATION CHARGES 3RD YEAR

TTPS ES Circle Instn II Removing cleaning and assisting for calibration of all field instruments in Pneumatic Lab and other related works during Unit V Annual overhaul 2025 2026

Intermediate Wheel Profile Checking Gauge with calibration certificate for B.G. wheel-sets, Gauges made of hardened Stainless Steel plate machined on CNC with Laser etched permanent marking, useful fo

Tri Square (Engineers Square) of Size 6 inch, Make: ULTRA/CRYSTAL or Similar Note: Calibration certificate from an NABL/Government-approved laboratory should be provided along with the supply.

THREAD PLUG GAUGE GO AND NO GO SIZE 1"X 8UNC 2B CERTIFIED TO NATIONAL STANDARD. Make BAKER,HIP,LIMIT,MM ACCEPTED MAKE:AS PER TENDER WITH NABL CALIBRATION CERTIFICATE

WHEEL PROFILE GAUGE AS PER ANNEXURE ACCEPTED DESCRIPTION:TOOL STEEL TO IS : 3748 /1990. HARDNESS--50/55 HRC. SUPPLY WITH TEST CERTIFICATE ISSUED FROM NABL APPROVED LAB. CALIBRATION CERTIFICATE ISSUED

ANALOG TYPE INSULATION TESTER(MEGGER), WITH ALL ACCESSORIES, MINIMUM ONE YEAR WARRANTY AND CALIBRATION CERTIFICATE FROM NABL ACCREDITED LAB. RANGE:1000V, 2000 MEGA OHM MAKE/MODEL:MECO MC981BA OR KUSUM

Adjustable Type Air Spring Height Measuring Gauge (GO &NO GO) As per Drawing No.SK-ASG.1/2019 Supply with calibration certificate. Accepted Make/ Brand- Ganapathy Chenai, Duro,AOGE & Escort

Digital capacitance meter, Make / Brand: Model No.EDC128B of Escorts make or Model No. U1701B of Keysight make. (Firm should submit Calibration checking certificate along with material) FIRM'S OFFER M

Digital Electromagnetic water flow meter, Dia-50 mm. Flange type with integral transmitter. PTFE liner as per ISO-4064 with NABL calibration certificate and warranty certificate. Make:VSAN, Magtech 20