Inspection, Testing & Audit Tenders in Tamil Nadu

Gauge for measuring Dash pot oil- level (Flexible wire gauge) provided with marking scale measuring range: 10 mm to 50 mm, Accuracy +/- 1.0 mm & supply with calibration certificate Make GANAPATHY and

Wheel profile checking gauges set for BG locomotives, with calibration certificate, in one set, consisting two type of gauges: (i) Wheel profile checking gauge (Female) for wear adaptor profile, to RD

Digital insulation tester Range upto 2 G-ohm, Voltage -1 KV along with calibration certificate and warranty certificate . Make- Motwane or Multiccope or Sanyo or MECO only. FIRM'S OFFER :- MAKE MECO

Wheel profile checking gauges set for BG locomotives, with calibration certificate, in one set, consisting two type of gauges: (i) Wheel profile checking gauge (Female) for wear adaptor profile, to RD

Adjustable Type Air Spring Height Measuring Gauges (GO & NO GO) As per Drawing No. SK-ASG. 1/2019, Supply with calibration certificate. Firm's offer: Same as above, Make/Brand:"GANAPATHY CHENNAI ".

MASTER SETTING RING SIZE: 140 MM, SIZE TOLERANCE: 0.006 MM. MATERIALS - OIL HARDENING NON-SHRINKING GAUGE STEEL. HARDEN & TEMPERED TO 60-62 HRC. TESTING & CALIBRATION CERTIFICATE TO BE PROVIDED NABL A

Gauge for measuring Dash pot oil- level (Flexible wire gauge) provided with marking scale measuring range: 10 mm to 50 mm, Accuracy +/- 1.0 mm & supply with calibration certificate Make GANAPATHY and

TORQUE WRENCH 150-750 NM, 3/4 inch Sq. DRIVE. Make/Brand: CHICAGO / RODCRAFT / FUJI / GEDORE / FACOM / NORBAR / SNAP-ON. NOTE: 1) CALIBRATION CERTIFICATE FOR THE INSTRUMENT TRACEABLE TO NATIONAL / INT

'E ' Type CTRB Narrow Jaw Adapter Bore Inspection Gauge to Drawing No. J&TD. CW.PER SR.DRG.No G-56, Supply with NABL Calibration certificate for 12 months validity. Firm's offered make: Self

Master Setting Ring Size: 130 mm, Size tolerance: 0.006 mm. Material - Oil hardening non shrinking gauge steel. Harden & tempered to 60-62 HRC. Testing & calibration certificate to be provided NABL ac

10-A Contour Gauge for CBC inspection as per RDSO Drg. No. WD-84073-S-1-RC. Note: Item to be supplied along with calibration certificate issued from NABL approved lab.

Custom Bid for Services - C 177 Engagement of Agency for carrying out Onsite NABL calibration of 110KV Yard PT s and PTs in HTSC No1841 at Desalination plant of CPCL Athipattu

Custom Bid for Services - AMC of Gas Detection System including calibration of 05 nos of Gas Sensors 05 nos Transmitters at BHELRanipet Similar Category Customized AMC/CMC for Pre-owned Products

As per tender document (NIT)

BOLTS HIGH TENSILE HEXAGONAL HEAD 5/16" X 1.5" LONG 18 TPI THREADS UP TO 1" LENGTH WITH ONE HEXAGONAL HEAD HIGH TENSILE NUT AND 2 PLAIN FLAT WASHER OD-1", ID-3/8" AND THICKNESS 1/8" AND RECTANGULAR .SECTION SPRING WASHER OF SIZE OD 5/8" I/D-3/8" THICKNESS 1/16".

BOLTS HIGH TENSILE HEXAGONAL HEAD 5/16" X 1.5" LONG 18 TPI THREADS UP TO 1" LENGTH WITH ONE HEXAGONAL HEAD HIGH TENSILE NUT AND 2 PLAIN FLAT WASHER OD-1", ID-3/8" AND THICKNESS 1/8" AND RECTANGULAR .SECTION SPRING WASHER OF SIZE OD 5/8" I/D-3/8" THICKNESS 1/16".

BOLTS HIGH TENSILE HEXAGONAL HEAD 5/16" X 1.5" LONG 18 TPI THREADS UP TO 1" LENGTH WITH ONE HEXAGONAL HEAD HIGH TENSILE NUT AND 2 PLAIN FLAT WASHER OD-1", ID-3/8" AND THICKNESS 1/8" AND RECTANGULAR .SECTION SPRING WASHER OF SIZE OD 5/8" I/D-3/8" THICKNESS 1/16".

Refer Tender Notice

MTPS I M II Circle OAHS Maintenance Servicing Calibration and Stamping of 2 nos 100 tonne Capacity AVERY make Electronic Weighbridge installed at ash dyke area of MTPS I for wet ash

Facility Management Services - LumpSum Based - Industrial; Calibration of Safety Relief Valve Steam Feed Water Nitrogen Accumulator Relief Valve by Trevi Test; Consumables to be provided by service provider (inclusive in contract cost)

Supply & commissioning of equipment assembly setup with AC fitting as per Annexure-A & Annexure- B . Note:- the firm will submitt the warranty certificate,test certificate and calibration certificate along with the material.

Providing Air conditioner unit for sample store room (Second Floor) Meeting Hall (Ground Floor) at existing National Accreditation board for testing and calibration lab at TNCSC Karumathampatti Godown complex in Coimbatore District.

Adopter Crown Seat Gauge %u2013 Casnub -22 NL, 22 NLB & HS Bogies. As per Drawing attached. All gauges must be calibrated and one year separate calibration certificate required with this material. ACC

Digital weld gauge (0-20mm) as per detailed specification attached. Make : KRISTEEL/MITUTOYO/INSIZE/ EQUIVALENT. NOTE : Item to be supplied along with valid calibration test certificate from NABL accredited/GOVT approved labs.

Wheel flange profile female template as per RDSO Drg.no. SKDL 2561 ALT-8 (Wear adopted profile) along with calibration certificate tracable to NABL standard. NOTE: 1.Firm should supply JYOTI or PARAGO

Set of Gauges for attending Train parting cases of freight stock as per Annexure-A (enclosed), Calibration certificate should be issued from NABL approved test lab or from any Govt. approved lab.

WHEEL DEFECT GAUGE ( BROAD GAUGE TYRE DEFECT GAUGE FOR COACHING STOCK ) As per I.R.C.A. Part IV PLATE -38 RULE- 2.8.4 (ALONG WITH CALIBRATION CERTIFICATE HAVING VALIDITY OF 12 MONTHS.) Accepted make b

Gauge for measuring the radius of buffer plunger face plate (R-1905 mm) Ref Drg NO. GOC/C/GA-3- 13425 (Item No.1 & 2) supply with calibration certificate ACCEPTED MAKE- GANAPATHY

LCR Meter with transistor tester to Model No: LCR55A. Make: Amprobe (or) Fluke only. Note: 1) Item to be supplied along with calibration and warranty certificate. 2) Firm should submit authorized dea

Supply of Multi-function Energy Meters having 4 Line LCD display, Non-Volatile memory, Fully type tested as per IS 14697 ,ISI marked, Calibration LED with RS-485 communication port, Voltage & Current

Set of gauges for CBC inspection consisting of 03(three) items.Hardness of material 40/45 HRC minimum. To be supplied with calibration certificate.set of gauges comprises of (1) Contour worn limit gau

POWER FACTOR METER-ANALOG, PORTABLE, AC THREE PHASE- 440V. SCALE:MINIMUM 0.5 LEAD AND LAG WITH CALIBRATION CERTIFICATE AND MINIMUM OF ONE YEAR WARRANTY. MAKE: MECO SPF 3 OR EQUIVALENT IN ALL ASPECTS

CENTER PIVOT GAUGE FOR CASNUB 22W (M) 22 NL , 22 NLB & 22 HS BOGIES , Ref- Fig No.46 - RDSO-G-95 Manual , & supply with calibration certificate. FIRMS OFFER; MAKE/BRAND: GANAPATHY CHENNAI

ADAPTER SIDES GAUGE FOR CASNUB 22NL, 22NLB & 22HS BOGIES , Ref-Fig No.17- RDSO- G-95 Manual & supply with calibration certificate , 12 months warranty from the date of supply. Accepted Make: Ganapathy

Gauges for Flat type Centre Pivot Top and Bottom as per Annexuer-A attached. Gauges to be supplied with Material Test Certificate & Calibration Certificate from NABL or NABL accredited or Govt. approv

ELECTRONIC WEIGHING SCALE WITH MAXIMUM LOAD CAPACITY OF 200 KG, MINIMUM WEIGHMENT OF 200 GRAMS AND RESOLUTION OF 10 GRAMS CLASS III TYPE WITH INTERNAL CALIBRATION, AND 5 SECONDS SPEED MEASUREMENT. DI

1.DM 25R25-40 Gas flowmeter with mechanical index, KROMSCHRODER-For metering gas where no calibration is required, display of the quantity consumed, with E1 and E200 pulse generators-Nominal flow rate

Gauges for Flat type Centre Pivot Top and Bottom as per Annexuer-A attached. Gauges to be supplied with Material Test Certificate & Calibration Certificate from NABL or NABL accredited or Govt. approv

Supply and Installation of Safety Relief Valve, Size: 1/2 inch, Set Pressure upto 25 bar, Make: Herose / Fainger lesser. NOTE : The safety valve should be supplied with calibration certificate. The sa

Supply and Installation of Hydraulic test Pump. Range: 0-700 Bar. Reference Pressure Gauge range: -0.8 to 20 Bar . Resolution-0.001 Bar . Two gauge stand for simultaneous calibration of two Pressure g

TYRE DEFECT GAUGE ( BROAD GAUGE TYRE DEFECT GAUGE FOR COACHING STOCK ) As per I.R.C.A. Part IV PLATE -38 RULE- 2.8.4 (ALONG WITH CALIBRATION CERTIFICATE HAVING VALIDITY OF 12 MONTHS.) Make/Brand-GANAP

Custom Bid for Services - Re Verification and Stamping of 25 Nos of Standard cast Iron weights of 1000 Kgs Each along with NABL OR Legal Metrology department certification Similar Category Calibration Services

Custom Bid for Services - CC 0049 22 Annual Rate Contract ARC for service maintenance calibration of fixed gas detectors of all units at CPCL Manali Refinery for a period of three years

Custom Bid for Services - C197E Engaging an Agency for Development of a Digital Platform Web Application for reporting Electrical testing Dashboard Calibration Dashboard Earth Pit Dashboard Operational Availability Electrical RTF Audit Dashboard

Custom Bid for Services - CPCLY25107 AMC for Servicing and Load Test of EOT HOT Cranes at CPCL Similar Category Calibration Services Testing Service for On-Board/Commissioned Equipment/Instrument related to Plant

L143019708401001 OXYGEN ANALYSER IN SITU TYPE, L143019708401002 CALIBRATION CYLINDERS FOR COMMISSIONING, L143019708401003 CALIBRATION CYLINDERS FOR HAND OVER, L143019708401001 OXYGEN ANALYSER IN SITU TYPE A, L143019708401002 CALIBRATION CYLINDERS FOR ... L143019708401003 CALIBRATION CYLINDERS ...

Calibration Services - As per NIT; Service and Stamping of Weighing Scales or Weighing machine Range 0 to 100 kg for 8 Quarter as per NIT Price Bid SL No 1; As per NIT; HPBP BHEL Trichy, Calibration Services - As per NIT; Service and Stamping of ... Trichy, Calibration Services ... Trichy, Calibration Services ... Trichy, Calibration Services ... Trichy, Calibration Services ... Trichy, Calibration Services ... Trichy, Calibration Services ... Trichy, Calibration Services ... Trichy, Calibration Services ...

SeaSpray nebulizer, U-shape conical nebulizer, Calibration mix 2, Metal calibration mix majors, Mercury standard, Calibration Blank solution, ICPOES MPAES Wavecal, OneNeb series 2, inert ICP nebulizer

1000 DIA X 2200MM LONG TE/TU PULLEY WITH LAGGING AS PER DRG. DGM/CON/MII/10/2005(SHEET NO: 1 TO 3) (Q3) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Bid to RA enabled Yes RA ... Empanelled Inspection Agency /Authority ... LIMITED Quality Assurance Plan ...

110 KW BELT GEAR BOX FOR BELT– I & II OF BWE 1571-74 & BELT-III OF 1420-22. DRAWING NO. SME-2874 (Q3) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Bid to RA enabled Yes RA ... Empanelled Inspection Agency /Authority ... LIMITED Quality Assurance Plan ...