Inspection, Testing & Audit Tenders in Tamil Nadu

KNOB TYPE AIR REGULATOR HAVING 1/2" INLET AND OUTLET CONNECTION ALONG WITH MOUNTING ACCESSORIES FOR OPERATING RANGE OF 0-16 KG/CM2 WITH NABL CALIBRATION CERTIFICATE SIMILAR TO MODEL NO. LR-1/2-MIDI O

PEDESTAL JAW GAUGE FOR CASNUB 22W, 22W(M) BOGIES AS PER FIG. NO.31 OF RDSO G-95 MANUAL. WARRANTY: MINIMUM OF O1 YEAR. MAKE/BRAND: PIE OR GANAPATHY INDUSTRIES OR SIMILAR. CALIBRATION CERTIFICATE FROM O

CENTER PIVOT GAUGE FOR CASNUB 22W (M) 22 NL , 22 NLB & 22 HS BOGIES , Ref- Fig No.46 - RDSO-G-95 Manual , & supply with calibration certificate , warranty 12 months from the date of supply. Accepted m

1) Tyre defect gauge for BG coaching stock as per drawing at plate no. 52 of IRCA enclosed at Annexure. Condemning thin flange 22 mm and Flatness 50 mm. To be supplied with Calibration certificate. 2)

BOTTOM ANTI CREEP HORIZONTAL LOCATION GAUGE TO RDSO DRG. NO. WD 84073-S-3-RC (FIG.-13 OF G-80 TECHNICAL PAMPHLET. CALIBRATION CERTIFICATE FROM NABL APPROVED LAB WITH THE VALIDITY OF 2 YEARS AND WAR

Flexible wire gauge for measuring dash pot oil level with marking scale range 10 mm to 50 mm with calibration certificate from NABL/GOVT approved test house. Material 4 mm thick tool steel plate to IS

CENTRE PIVOT GAUGE FOR CASNUB 22W(M), NL, NLB, HS BOGIES AS PER FIG. NO.46 OF RDSO G-95 MANUAL. WARRANTY: MINIMUM OF ONE YEAR. MAKE/BRAND: PIE OR GANAPATHY INDUSTRIES OR SIMILAR. CALIBRATION CERTIFICA

Pneumatic pressure gauge dial size - 3 1/2" (inches), range 0- 21 Kg/Sq. cm with least count 0.2 kg/Sq. cm and 1/2" inch BSP thread fittings. The supply should accompany calibration test certificate.

ADAPTER CROWN LUG GAUGE FOR CASUNUB 22W, W(R), 22W(M) BOGIES AS PER FIG NO.10 OF RDSO G-95 MANUAL. WARRANTY: MINIMUM 01 YEAR. MAKE/BRAND: PIE OR GANAPATHY INDUSTRIES OR SIMILAR. CALIBRATION CERTIFICAT

ADAPTER CROWN LUG GAUGE FOR CASUNUB 22W, W(R), 22W(M) BOGIES AS PER FIG NO.10 OF RDSO G-95 MANUAL. WARRANTY: MINIMUM 01 YEAR. MAKE/BRAND: PIE OR GANAPATHY INDUSTRIES OR SIMILAR. CALIBRATION CERTIFICAT

Custom Bid for Services - Carrying out Transformer Oil Filtration Performance checking of Transformers and CT PT Calibration of Energy Meters Measuring Instruments and Relays at Chennai Pump Station Chittoor Pump Station Asanur Pump Station and Sanka..

Differential Pressure Transmitter, Make: Rosemount Calibration range 0-200 mbar, Differential Pressure Transmitter, Make: Rosemount, Calibration range 0-100 mbar

FLOW ELEMENT ORIFICE--ACW HEADER, FLOW ELEMENT ORIFICE--DMCW-TG HDR, CALIBRATION CHARGES -DMCW- TG HDR, CALIBRATION CHARGES -ACW HEADER

Argon Gas flowmeter along with calibration certificate.

Supply and Installation of Level Calibration System.

BIMETAL BANDSAW BLADE HSS M42 TO SIZE 5200 mm X41 X 1.30 mm, TPI -3/4 WITH VARIABLE TOOTH PITCH AND

NCTPS I ES Circle C I Division S Dn VI Carrying out maintenance activities of C I equipments in LAB PERIPHERALS GENERATOR section and calibration of field instruments of total plant for a period of 180 days

Template to check control arm silent block seat of FIAT Bogie (LHB); Ref: Drawing No. J&T/JUDW/16-621. Material cold work tool steel to IS: 3748/90, Hardness 50/55 HRC. Supply with calibration certifi

LHB Brake Disc thickness gauge (Go & No Go) size GO 110.5 mm and NO GO 96 mm. Gauge Thickness 8 mm. Material tool steel to IS: 3748/90. Hardness: 50/55 HRC .Supply with calibration certificate. Make:

Groz Steel Ratchet Type Torque Wrench, Range 70-340 NM (TQW/RT/1-2/340) Square Drive: 1/2 inch Least count- 0.5 Swing Arc ? 10 degree Head depth- 33 mm Note: Calibration certificate from Central govt/

ADAPTER SIDE LUG GAUGE FOR CASNUB 22W, 22W(R), 22W(M), BOGIES AS PER FIG NO.12 OF RDSO G-95 MANUAL. WARRANTY: MINIMUM OF 01 YEAR. MAKE/BRAND: PIE OR GANAPATHY INDUSTRIES OR SIMILAR. CALIBRATION CERTIF

COLUMN GIB GAUGE FOR CASNUB 22W, 22W(M), NL, NLB, AND HS BOGIES AS PER FIG. NO.41 OF RDSO G-95 MANUAL. WARRANTY: MINIMUM 01 YEAR. MAKE/BRAND: PIE OR GANAPATHY INDUSTRIES OR SIMILAR. CALIBRATION CERTIF

K- THREAD PROFILE GAUGE (Comb Type) FOR SCREW (ICF) With wear limit -0.50 mm Go 01 No & No Go -01 No Size Ref Drg No. RDSO-SK 99002 Material- Stainless Steel- AISI-304. Supply with Calibration Cert

FRICTION SHOE WEAR GAUGE FOR CASNUB 22W, 22W(M), NL, NLB AND HS BOGIES AS PER FIG. NO.44 OF RDSO G-95 MANUAL. WARRANTY: MINIMUM 01 YEAR. MAKE/BRAND: PIE OR GANAPATHY INDUSTRIES OR SIMILAR. CALIBRATION

PEDESTAL SIDES AND CROWN SIDE GAUGE FOR CASNUB 22 NL, NLB, HS BOGIES AS PER FIG NO.30 OF RDSO G-95 MANUAL. WARRANTY MINIMUM OF 01 YEAR. MAKE/BRAND: PIE OR GANAPATHY INDUSTRIES OR SIMILAR. CALIBRATION

SET OF TEMPLATE IRS THICK FLANGE PROFILE AS PER DRG. NO.A3/04/CNB/1976/5029 GUAGE CONSISTING OF LHS=01 NOS. RHS=01 NO. AND MASTER PROFILE=01 NO. TOTAL 03 NOS. WITH CALIBRATION CERTIFICATE, MAKE- PIE,

Taper Plug Gauge for 6FRA6068 type TM as per RDSO DRAWING NO. SKEL-5032 ALT- 0 OR LATEST. During Delivery of material , Calibration certificate issued from NABL/ GOVT. approved test Lab. MAKE: PRASAD / PIE / GANAPATHY or equivalent

Tyre defect gauge for BG wagons as per drawing plate no.52 Rule 3.3.5 & S 4.19.1 of IRCA part III enclosed at annexure. Condemning thin flange 16 mm and Flatness 60 mm. To be supplied with Calibration

Gauge for 62 mm Dia Pin Hole of Draw Hook. Required size - NOGO - 65.0 mm (Flat Type) Ref. Drg. No. RDSO SK 99007. Material - Tool Steel, IS 3748/90 Hardness - 50/55 HRC. Supply with Calibration Certi

Gauge for Shank Body - 39 mm, Required size: NOGO-36.0 mm (Snap Type) Ref. Drg. No. RDSO SK 79063 Alt-4 & SK 99007 Material - Tool Steel, IS 3748/90 Hardness - 50/55 HRC. Supply with Calibration Certi

ENGAGING AN INSPECTION AGENCIES TO CARRY OUT PRESHUTDOWN ULTRASONIC THICKNESS GAUGING (WITH SPECIFIED NDT EQUIPMENTS) AT CPCL, MANALI REFINERY

Onsite Calibration of Test Equipments at Chennai Airport

Supply, installation and calibration of load cell (Q3)

Ratchet Type Torque Wrench, 3/4 inch Sq. drive, Range 200-815 Nm, IS:7268-1974 for industrial use with calibration and guaranty/warranty certificate. Make: Gedore or Macmaster TW 600R or Stanley or Taparia TWR 600 only

Air spring height measuring gauge (Go & No Go ) as per drg no SK-ASG-1/2019, Material 3mm tool steel as per IS:3748/1990. Supply to be made in wooden box with calibration certificate from NABL approve

KNUCKLE PIN HOLE WEAR LIMITS GAUGE FOR E-TYPE CBC. AS PER AAR GAUGE No-49364-B.FIG-7 OF RDSO-MWOCD (CPLR)/3/2020-O/0-PED/SW/RDSO. SUPPLY WITH CALIBRATION CERTIFICATE from NABL certified Firm. Accepte

Set of feeler gauge size 0.50 mm -1.0 mm -2.0 mm - 3.0 mm - 4.0 mm -5.0 mm -6.0mm - 7.0 mm - 8.0 mm - 9.0 mm - 10.0 mm & 12.0 mm , Each 200 mm long & supply with calibration certificate , Warranty- 1

Ring gauge for pinion of WAG-9/ WAP-7 locos with suitable GO and NO GO gauge Size 15.0 Plus or Minus 0.2. Reference RDSO drawing No. SKEL- 5043, Alt-0. To be supplied with calibration certificate issu

Ring gauge for pinion of WAG-9/ WAP-7 locos with suitable GO and NO GO gauge Size 15.0 Plus or minus 0.2 Reference RDSO drawing No. SKEL-5043 Alt-0. To be supplied with calibration certificate issued

Supply of spares for Slip Gauges for pinion consisting of range 15.0 mm, 15.1 mm, 15.2 mm up to 18.0 mm (in incremental of 0.1 mm) total of 31 nos, along with calibration certificate. Width 20 mm, len

Groz Steel Ratchet Type Torque Wrench, Range 70-340 NM (TQW/RT/1-2/340) Square Drive: 1/2 inch Least count- 0.5 Swing Arc-10 degree Head depth- 33 mm Note: Calibration certificate from Central Govt/NA

Procurement of Digital Torque Wrench- 3/8 inch hexagonal drive of range 0-25 Nm with suitable handling box. Calibration certificate traceable to a NABL-accredited company shall be submitted along with the supply. MAKE: SNAPON/ FACOM/ ALICATES.

Providing 1 no. diesel driven AC cr or equivalent vehicle for the use of CE/TPI for a period of one year.

Custom Bid for Services - Conducting 3 types of tests viz cord pull out strength and Tear resistance of top and bottom cover rubber and Abrasion resistance test on samples of new Steel cord belts at IRMRI laboratory Similar Category Vulnerability and ... Products/ Material Testing Service ...

Title1, Title2, Title3, Title4, Title5, Title6, Title7, Title8, Title9, Title10, Title11

Calibrationof Test Equipments

SUBJECT: STRUCTURAL REPLACEMENT WORKS IN CALIBRATION TOWER AT IRUGUR TOP INSTALLATION. UNDER CRFQ NO. 1000395125 DT. 29.10.2022 Kindly quote you lowest rate per unit against each item in figures as well in words and your rates are valid for a period of 120 days upto 30.01.2023.After successful completion of contract period ,Repeat order shall be placed on mutual agreement. The quoted amount shall inclusive of all rates, taxes and duties but excluding Goods & Service tax will be paid extra as per prevailing rates and policy /rules and regulations. Kindly note that this is an e- tender and bids have to be submitted only online. Your offer is liable to be rejected if there is any deviation from terms and conditions and special conditions of the said tender. Following five documents are uploaded as tender documents. You are requested to sign all documents digitally and upload all documents in the tender without any corrections. Please note that even if a single document is missed while digitally signing uploading; the bid is tantamount to reject. Conditional bids will also be liable for rejection .No changes shall be made in the tender documents and it should be digitally signed and uploaded as it is. Tender Documents 1. Tender Covering Letter.2. GPC&GCC 3. Bid Security Declaration 4.Holiday Listing of vendors During the technical evaluation above parameter of successful digital signing and uploading of tender documents will be checked. Your offer digitally signed on all pages of bid and attached tender documents files should be signed digitally and uploaded in the e- procurement portal of BPCL on or before 04.11.2022@ 1600 Hrs. BPCL will not be held responsible for any delays due to connectivity issues etc. The rates should be quoted for the specifications mentioned in the tender only and no deviation will be entertained . Any deviation found in the bid; same will be liable for disqualification. You may kindly contact us if in case you need any clarifications before submitting the your offer. The Details of the Contact person is as follows Name –Mr. Susen Murmu, Manager (Ops) ,Irugur TOP Installation Ph: 7022462369 Email ID: [email protected]

Tyre defect gauge for BG coaches size-22 mm as per plate 2.8.4 of IRCA made from 4mm thick hard alloy steel plate {Note ? (1) gauge made by tool steel hardness 45/55 HRC (2) First calibration valid fo

NCTPS I ES Circle C I Dn Sub division VI Carrying out maintenance activities of C I equipments in LAB PERIPHERALS GENERATOR sections and calibration of field instruments for a period of 360 days for the year 2026 27

Comprehensive Annual Maintenance Contract (CAMC) with calibration for Impact testing Machine (Make: FIE & Sl.No. 20231054-6) INV. No.9373 available in CMT/Welding Lab/Shell for a period of 5 years by OEM's authorized dealer M/s.FHI Equipments, Chennai.