Inspection, Testing & Audit Tenders in Tamil Nadu

Supply of Digital capacitance meter, as per specification attached. Make: KUSAM-MECO, B &K Precision, Metravi, only. Note : Item to be supplied along with valid calibration test certificate from NABL accredited/GOVT approved labs.. Authorized dealership certificate or proof of purchase from authorized dealer shall be submitted along with tender.

KINEMATIC VISCOSITY BATH with Yokogawa Controller include Bath, Viscometer trayand illumi nation), Temperature range: 40- 120 degree C, Temperature controllerresolution: 0.01 degree C suitable for 6 vis cometers at a time, Accessories- ... with calibration certificate ...

SRP20TS035

The work shall be carried out at BPCL IRUGUR TOP INSTALLATION, RAVATHUR P.O., IRUGUR VIA, COIMBATORE TAMIL NADU-641103 PLEASE CONTACT BELOW MENTIONED FOR ANY QUARRIES: ROHITH D S MANAGEMENT TRAINEE (OPS) IRUGUR TOP INSTALLATION

EMCO MAKE AVR, Model no. EE 301 M with advance features of O/V & U/V U/V blocking 85% without LDC, EMCO MAKE, TAP POSITION INDICATOR (TPI), MODEL NO. EE 601

True RMS AC/DC clamp meter with AC flex [True RMS AC/DC clamp meter with AC flex current clamps of M/s Fluke Model No. 381 or MEGER, SONEL FLIR, METRAVI or equivalent as per the attached specifications. Calibration certificate from NABL/GOVT approved agencies should be supplied along with the meter.]

Outside micrometer with ratchet stop range 150-175 mm having resolution 0.01 mm with carbide tipped measuring faces to series No.103-143-10 of make Mitutoyo or Equivalent in MAHR or equivalent in TESA only. NOTE: Item to be supplied along with valid ... valid calibration test ...

Digital vernier caliper, range 0-1000 mm [Digital vernier caliper, range 0-1000 mm having resolution 0.01 mm and accuracy 0.07mm of series No.:500-502-10 of make Mitutoyo or equivalent in MAHR or equivalent in TESA only, along with calibration certificate from NABL or OEM or any govt. approved labs.]

Custom Bid for Services - Condition Monitoring and Trending Analysis on the equipment of all types of rigs installations in Cauvery Asset of ONGC Karaikal for Three Years 2025 to 2028 Similar Category Operation And Maintenance Of Electro-Mechanical ... Installations Calibration Services ...

Pressure sensor and ADC board for UTE-40 (Q3), Calibration of equip after spare integration (Q3)

M17X1.5P SCREW PLUG GAUGE -GO AS PER DRG NO. G RGB 060 1 047 FOR SOCKET/NOZZLE PLATE OF RGB 60, M17X1.5P SCREW PLUG GAUGE -NOGO AS PER DRG NO. G RGB 060 1 0 48 FOR SOCKET/NOZZLE PLATE OF RGB 60, M135X3P SCREW PLUG GAUGE -GO AS PER DRG NO. G RGB 060 1 ... 165-12 TPI BUTT. ... 165-12 TPI BUTT. ... 165-12 TPI BUTT. ... 165-12 TPI BUTT. ...

BAND SAW LOOP 5334X41X1.3-4/6TPI-M42 (HSS-M42 BIMETAL BANDSAW BLADE SIZE 5334MM X 38/41MM WIDTH 1.3M, BAND SAW 1140X13X0.65-8/12 TPI-M42 (HSS-M42 BIMETAL BANDSAW BLADE SIZE: 1140X13X0.65-8/12 TPI BUTT W, BAND SAW LOOP 8000X67X1.6-2/3TP-M42 (HSS- M42 ... 10/14 TPI -M42 ... 1140X13X0.5-14 TPI OR, ...

Mass Lynx Acquisition PC and software update plan

Security Manpower Service (Version 2.0) - Office/Commercial/Institutions/Residential; Unarmed Security Guard

Item 1: HIGH TENSILE BOLT-SIZE: 7/8 INCH DIA. X 3 1/2 INCH LENGTH., Item 2: HEX BOLT 1" X 4 1/2" X 8 TPI X 2 1/2" THREAD LENGTH

Custom Bid for Services - 6 Nos On site Calibration of Flanged safety Relief Valve of inlet size 50NB 900 class ANSI B 165 standard connection as per prescribed CCOE procedure and providing test certificate from the competent person authorized by ... site Calibration of ... site Calibration of ...

Automated HPLC for Biostimulants

DIGITAL VERNIER CALIPER Range of 0-450 [DIGITAL VERNIER CALIPER Range of 0-450 mm having resolution 0.01 mm to series No.500-500-10 of Make Mitutoyo or equivalent in MAHR or equivalent in TESA only, along with calibration certificate traceable to NABL certified Labs. Warrenty period:12 months from the date of delivery.]

Custom Bid for Services - Procurement of Arterial Blood Gas Analyser along with required reagents, quality control, consumables on rate contract basis Similar Category Operation And Maintenance Of Other Machines And Plants Repair, Maintenance and Installation of Plant Systems/Equipments Selection of Laboratories for Testing of Products/Material

3MSR0212 ACTI DIFF LYSING AGENT 1 litter, CARD REAGENT VALIDITY 1 piece, 3MSR0214 ISOFLUX DILUTING AGENT 20 litter, 3MSR0227 TRANSFLUX ACTIVE AND PASSIVE CLEANING AGENT 5 litter, BLOOD CLOT FILTER 2 piece by set, 3MSR0213 CLEANING SOLUTION 250ml, ... 250ml, QUALITY CONTROL 1L ...

Neutron survey meter, Neutron survey meter calibration software, Neutron survey meter PC connecting cable, Computer for data acquisition

Removing, Cleaning, Calibration, Checking and Refixing of field instruments, PLC system in BOP I area during AOH 2024.

Service of 20 Ton H-Frame Hydraulic Press -calibration of data acquisition system and provision for hydraulic lubrication

Custom Bid for Services - ANNUAL MAINTENANCE CONTRACT FOR FULLY AUTOMATIC UNIVERSAL HARDNESS TESTER BRINELL VICKERS ROCKWELL MAKE AFFRI ITALY MODEL INTEGRAL 5 OFT NO 3670 QTY 01 WHOLE JOB INCLUDING CALIBRATION AND PERIODICAL SERVICING AS PER SCOPE .. Similar Category Annual Maintenance Contract for Network Security Devices Annual Maintenance Contract for Networking Devices (Version 2) Annual Maintenance service - EPABX System

Custom Bid for Services - CPCLY25245 Annual Rate Contract (ARC) for service, maintenance & calibration of Fixed Gas Detectors of all units at CPCL, Manali Similar Category Customized AMC/CMC for Pre-owned Products Calibration Services Testing Service for On-Board/Commissioned Equipment/Instrument related to Plant

Customized AMC/CMC for Pre-owned Products - SERVICE WITH CALIBRATION FOR CARL ZEISS PRISMO ULTRA 3D CMM; TOTAL NO OF MACHINES COVERED 2 NOS; Annual Maintenance Contract (AMC); CONTRACT PERIOD ONE YEAR FROM THE DATE OF SUPPLY ORDER AND 100 PERCENT PAY.., Customized AMC/CMC for Pre-owned Products - BREAKDOWN VISITS FOR CARL ZEISS PRISMO ULTRA 3D CMM; REQUIRED QUANTITY 6 MANDAYS; Annual Maintenance Contract (AMC); CONTRACT PERIOD ONE YEAR FROM THE DATE OF SUPPLY ORDER AND PAYMENT WILL BE MADE FOR THE N..

Calibration and Servicing of one no 100 tonne capacity electronic weighbridge installed at silo area for a period One year

Custom Bid for Services - Monitoring and Assessment of various Environmental paratmeters at Kamarajar Port Limited, Chennai, Tamil Nadu Similar Category Air Quality Monitoring Service Selection of Laboratories for Testing of Products/Material Testing of Water Quality

Customized AMC/CMC for Pre-owned Products - Annual service & maintenance contracts (AMC) for Dynalab make meteorological sensors and equipments; Dynalab make; Annual Maintenance Contract (AMC); Three times a year; No, Customized AMC/CMC for Pre-owned ... - Calibration of ... - Calibration of ... - Calibration of ... - Calibration of ... - Calibration of ... - Calibration of ...

Custom Bid for Services - ANNUAL MAINTENANCE CONTRACT FOR MOTORIZED INVERTED METALLURGICAL MICROSCOPE MODEL DMi8A AND MAKE LEICA OFT NO 3662 QTY 01 WHOLE JOB INCLUDING CALIBRATION AND PERIODICAL SERVICING AS PER SCOPE OF WORK AND TERMS CONDITIONS EN.. Similar Category ANNUAL MAINTENANCE SERVICE FOR Centralised air conditioning system Annual Maintenance Contract for Networking Devices (Version 2) Annual Maintenance service - EPABX System

DIGITAL ANEMOMETER WITH DETACHABLE SENSOR FOR MEASUREMENT OF AIR FLOW : Digital Anemometer specifications: maximum measurable air velocity 45 meter/sec, accuracy: +/-3%, resolution: 0.01, range: 0.1 to 45, type: Vane, LCD display, Alkaline battery, 1 ... with calibration certificate ...

Hand Driven Metal Body 1000V Analogue In [Hand Driven Metal Body 1000V Analogue Insulation Tester (MEGGER) with standard accessories and calibration certificate(NABL or any govt. approved agencies), Test Voltage : 1000 Volt, Measurement Range: 2000 M Ohms, Test Current: 2 Mili Ampere, Safety rating: Category III 1000 V of IEC 61010, Warranty 01 years. MAKE/Model: CIE 444 / WACO / Metravi / Meco / INDOTECH ONLY]

) Adjustable torque wrench without reversible ratchet with open ended spanner of 16 mm, Range 10-60 NM Make : Q-TORQUE model BMH960-QR or its equivalent. QTY-01 No/set. 2) Open end spanner Make : Q- TORQUE model OH916 or its equivalent QTY-01 ... valid calibration test ...

SET OF TORQUE ITEMS WITH ACCESSORIES AS PER FOLLOWING CONTAINIG ITEMS: 1. DIGITAL TORQUE WRENCH, RANGE - 10Nm to 200 Nm, SQUARE DRIVE - 1/2 (INCH), DISPLAY - DIGITAL 2. ADAPTOR - 3/4 ONE. 3. DEEP SOCKET - 1 SET CONSISTING 03 ITEMS (13mm, 17mm, 22mm) ... Note:- Calibration certificate ...

Hand Driven Metal Body 1000V Analogue In [Hand Driven Metal Body 1000V Analogue Insulation Tester (MEGGER) with standard accessories and calibration certificate(NABL or any govt. approved agencies), Test Voltage : 1000 Volt, Measurement Range: 2000 M Ohms, Test Current: 2 Mili Ampere, Safety rating: Category III 1000 V of IEC 61010, Warranty 01 years. MAKE/Model: CIE 444 / WACO / Metravi / Meco / INDOTECH ONLY]

Construction of Battery room building with electrification foundation plinths and allied civil works and 110 KV line works by making LILO of 110 KV Sunguvarchatram - Vallam Vadagal feeder at M/s. TPI composites for extension of new EHT supply for a

Calibration and Servicing of one no 100 ton capacity electronic Weigh Bridge installed at Silo area for a period One Year

Removing and re-fixing after Servicing/calibration of solenoid valves, Pressure Transmitter and level transmitters in AHP area during AOH-2024.

Pure Helium Filled Cylinder 47 Litres Capacity With 99.999% Purity And 140 Kg Pressure., Calibration Gas Cylinder 10 Litres Capacity With H2- 25.9 Ppm, CH4 - 14.8 Ppm, N2 - 1801 Ppm; Ar– B, Calibration Gas Cylinder 10 Litres Capacity With H2 - 15.01 Ppm, CH4 - 5.5 Ppm, N2 - 806 Ppm, Ar -Ba

Testing Service for On-Board/Commissioned Equipment Instrument related to Plant - Radiography testing of weld joints of equipments & pipelines at KKNPP 1&2 on call basis, NDT, Radiological; Radiography Testing Facility, As per scope of work; As per..

Operation And Maintenance Of Other Machines And Plants - Assistance in instrumentation preventive maintenance, breakdown maintenance and calibration at various plants of ZC

Design, Manufacture, Supply, Field calibration,Testing,Installation and Commissioing of High Pressure Turbine Flowmeter for Liquid Ammonia Flow measurement at HWP Tuticorin

Custom Bid for Services - SERVICING AND CALIBRATION OF UNIVERSAL TESTING MACHINE UTM STATIC ELECTRO MECHANICAL CAPACITY 100 KN MAKE WALTER Bai AG MODEL LFM 100 KN SNo 25122022 OFT No 3727 QTY 01 NOWhole Job THROUGH ANNUAL MAINTENANCE CONTRACT AS PE.. Similar Category Annual Maintenance Contract Service - Laser Speed Meter Annual Maintenance Contract for Network Security Devices Annual Maintenance Contract for Networking Devices (Version 2)

Hand held, Battery operated type Digital Micro Ohm Meter with rechargeable battery & AC adopter of Model no. MECO 7272 or Equivalent with suitable manufacturer recommended Accessories. Note: 1). Since the equipment is hand held and battery operated ... NABL calibration certificate ...

Hydrometer set complete consisting of 1) [Hydrometer set complete consisting of 1) Hydrometer float for reading SP Gravity 1100 to 1300 approx. float length 165mm-180mm calibrated over a length of 75 to 90 mm 2) Glass barrel to suit the above float ... & calibration certificate ...

Tooth Spacing K Value Checking GO & NO GO Gauge for Bull Gear 107 Teeth (Mating Shaft Pinion- 21 Teeth) for WAG-9 / WAG-9 HC loco. Size: GO: 317.09/317.17 mm & NO GO (Service Limit): 316.49 mm. Ref: RDSO Drawing No. SK.DP-3848. Material: Tool Steel - ... with Calibration certificate. ...

Customized AMC/CMC for Pre-owned Products - Annual service and Maintenance Contract AMC for Dynalab make meteorological sensors and equipments as per terms and conditions given in Annexure A; Dynalab make; Annual Maintenance Contract (AMC); Three ... - Calibration of ... - Calibration of ... - Calibration of ... - Calibration of ... - Calibration of ... - Calibration of ...

MECH SERVICES SUPERVISION, CALIBRATION OF TANK TRUCK, SHIFT, ASST IN TT SAMPLING AT GANTRY, ASST IN GANTRY OPERATION, ASST IN TWG PUMP HOUSE OPERATION, ASST IN TANK FARM OPERATION, ASST IN PLT, ETTPL SHIFT, ASSIST TTG CALIBRATION METER, SHIFT, ASST IN TAS MAINTENANCE, SHIFT, MECH MISC SERVICES or AMC ASSISTANCE, WORKER FOR LAB

HIRING OF ELECTRICIAN SKILLED, TEST OF EARTH PIT TEST REPORT HALF YEARLY, TESTING OF RELAY FDOL CONT, SERVICING OF ACB, SERVICING OF VCB, TESTING AND CHECKING VCB BOTTLE, WTI TESTING AND CALIBRATION, OTI TESTING AND CALIBRATION, THERMOGRAPHY OF EQUIPMENT, SERVICING OF CAPACITOR BANK, TESTING INSULATION RESISTANCE, TRANSFORMER OIL FILTRATION, TRANSFORMER OIL TESTING

Removing and re-fixing after Servicing/calibration of Air regulators/filters/lubricators, pressure gauges and pressure switches in AHP area during AOH-24. ---------------------------