Loading…
Loading…
1,476 results • Best match
Calibration Services - Thermal; Dimension, Force, Mass and Volume, Temperature, Pressure; NABL Labs; Hybrid (detailed in scope of work)
Calibration Services - Thermal, Mechanical, Electrical; Dimension, Mass and Volume, Voltage, Current, Power (AC/DC), Temperature, Time; NABL Labs; Buyer premises (onsite)
BIMETAL BANDSAW BLADE M42-IC-8800 X 54 X 1.6MM TPI: 3/4 HSN CODE: 82022000 OF ALPHA MAKE & BIMETAL BAN (Q3)
BIMETAL BANDSAW BLADE M42-IC-8800 X 54 X 1.6MM TPI: 4/6 HSN CODE: 82022000 OF ALPHA MAKE & BIMETAL B (Q3)
Full threaded CSK bolt with suitable nut of size 3/8" X 30 MM (16 TPI) for Traction motor of HHP locomotives.
Contract for conducting NDT on Coal Tubs and Trolleys at GDK- 11 Incline, RG-1 Area on Limited enquiry basis
Structural Stability tests of HEMM, Proof Load Test and NDT test on Cranes on Rate Contract for one year period.
LED SIGNAL LIGHTING UNIT WITH BUILT IN CURRENT REGULATOR RETROFITTABLE IN EXISTING CLS UNITS AS PER RDSO SPECN.RDSO/SPN/199/2010 REV.1.1 FOR MAIN SIGNAL LIGHTING UNITS : GREEN ( INSPECTION AGENCY-RDSO
Calibration Services - Electrical, Thermal; Voltage, Current, Power (AC/DC), Resistance, Specific heat & Humidity, Temperature; NABL Labs; Hybrid (detailed in scope of work)
Calibration Services - Mechanical, Thermal; Dimension, Force, Hardness & impact, Specific heat & Humidity, Mass and Volume; NABL Labs; Hybrid (detailed in scope of work)
Appointment of Road Safety Auditors and Consultant service for carrying out Road safety audit and detailed survey, investigation, preparation of DPR, RFP documents on NH65 of Hyderabad to Vijayawada Section from km. 40.000 to Km. 221.500 for long
Calibration Services - Electrical; Voltage, Current, Power (AC/DC), Frequency, Power Factor, Phase Angle, Resistance; NABL Labs; Buyer premises (onsite)
Calibration Services - Electrical; Voltage, Current, Power (AC/DC), Temperature, Dimension, Resistance; NABL Labs; Hybrid (detailed in scope of work)
Calibration Services - Electrical; Voltage, Current, Power (AC/DC), Frequency, Power Factor, Phase Angle, Resistance; NABL Labs; Buyer premises (onsite)
PORTABLE VIBRATION CALIBRATION SYSTEM AND ACCESSORIES, ADAPTOR KIT, QUARTZ SHEAR ICP, LOW NOISE COAXIAL CABLE
Calibration Services - Electrical, Thermal, Mechanical; Dimension, Temperature, Voltage, Current, Power (AC/DC), Frequency, Power Factor, Phase Angle, Time, Air Velocity; NABL Labs; Lab
Calibration Services - Mechanical, Thermal; Dimension, Mass and Volume, Force, Hardness & impact, Specific heat & Humidity, Temperature; NABL Labs; Hybrid (detailed in scope of work)
Calibration Services - Mechanical, Thermal; Mass and Volume, Density and Viscosity, Specific heat & Humidity, Temperature, Density; NABL Labs; Hybrid (detailed in scope of work)
Calibration Services - Mechanical, Thermal; Dimension, Mass and Volume, Force, Hardness & impact, Specific heat & Humidity, Temperature; NABL Labs; Hybrid (detailed in scope of work)
Calibration Services - Thermal, Mechanical, Fluid flow; Mass and Volume, Temperature, Pressure, Specific heat & Humidity, Dimension; NABL Labs; Hybrid (detailed in scope of work)
H2S Gas Calibration ampoules 10 ppm range as per enclosed Annexure (Q3), H2S Gas Calibration ampoules 20 ppm range as per enclosed Annexure (Q3), H2S Gas Calibration ampoules 25 ppm range as per enclosed Annexure (Q3), H2S Gas Calibration ampoules 50 ppm range as per enclosed Annexure (Q3)
(PH NO.:326143) QUALITY CONTROL SERA FOR INFECTIOUS DISEASE MARKER - POSITIVE CONTROL CONTAINING ANALYTES HBsAg, ANTI HIV 1 & 2, ANTI HBc, ANTI HCV, ANTI CMV - 5 ML, Accepted Brand: VIROTROL I, Manu
Procurement of New equipment for material testing laboratory including supply and installation at MT & QC Lab, National Academy of Construction, Hyderabad
Custom Bid for Services - Calibration of Temperature hygrometers Qty 4 Nos, Custom Bid for Services - Calibration of Standard weight box1 Steel F2 CLASS Qty 1No, Custom Bid for Services - Calibration of Standard weight box 2 steel F2 CLASS Qty 1 No, ... - Calibration of ... - Calibration of ... - Calibration of ... - Calibration of ...
WELSPUN Towel Hand Cotton Turkish as per Indian Air Force, WELSPUN Towel Hand Cotton Turkish as per Indian Air Force specification No. AIR HQ/DQAS/AC-050(R-1), issued by Directorate of Quality Assurance Services(AERO) Air Headquarters Ramakrishnapuram West Block - VI New Delhi- 110066 132 cm x 68 cm
Custom Bid for Services - REPAIR AND CALIBRATION OF SMB100A R&S SIGNAL GENERATOR WITH 2 YEARS WARRANTY Similar Category Repair and Overhauling Service Calibration Services
Calibration Services - Calibration of Intelligent Potentiometric Autotitrator Quantity: 1 Number; As per scope of work; As per scope of work; As per scope of work
Custom Bid for Services - Calibration of Vernier Caliper 15M Qty 1 No, Custom Bid for Services - Calibration of Push Pull Gauges 010000GM Qty 1 No, Custom Bid for Services - Calibration of Push Pull Gagues 03000GM Qty 1 No, Custom Bid for Services - ... - Calibration of ... - Calibration of ...
Custom Bid for Services - Calibration of magnetic particle tester QTY1 NUMBER, Custom Bid for Services - Calibration of U V Light intensity meter QTY1 NUMBER
Calibration Services - Mechanical; Dimension, Force, Mass and Volume, Pressure and Vacuum, Voltage, Current, Power (AC/DC); NABL Labs; Buyer premises (onsite)
CALIBRATION OF TAYAL TECH MAKE BREATH ANALYSERS OF SECUNDERABAD DIVISION
CALIBRATION OF LOAD BEAM CELL (PORTABLE AIRCRAFT PLATFORM SYSTEM) (Q3)
Supply of Standard Calibration Plates for ViiA7 RT-PCR, etc
Custom Bid for Services - Calibration of Rockwell Hardness Testing Machine
Custom Bid for Services - Calibration of Automatic Cable harness Tester
IMU/AHRS sensor along with breakout board and thermal calibration
Custom Bid for Services - CALIBRATION OF CONTROL SYSTEM CONTAMINATION CCS4()
Digital Stopwatch with NABL Calibration Make: PIC/Racer or similar
Digital Mini Gloss Meter,60 Degree with calibration standard tile.
Custom Bid for Services - OPERATIONAL AND MAINTENANCE CONTRACT FOR NDT EQUIPMENT ( AUS) Similar Category Customized AMC/CMC for Pre-owned Products
Civil works involved in extension of PEB shed for inspection shop and construction of NDT and Machine shop office buildings Midhani
Conducting NDT for Man Riding Chair Car and Chair Lift Systems at various UG Mines for a period of 2 years.
Carrying out Non Destructive Test (NDT) for steel cord belt discharge structure and loop take up structure at VKP Mine, RG2
Structural Stability Test on HEMM, Proof Load Test and NDT on Cranes under Rate Contract for a period of 1 year.
CIVIL WOKS INVOLVED IN EXTENSION OF PEB SHED FOR INSPECTION SHOP AND CONSTRUCTION OF NDT AND MACHINE SHOP OFFICE BUILDINGS,MIDHANI
Calibration Services - Mechanical, Electrical; Force, Voltage, Current, Power (AC/DC), Dimension, Mass and Volume, Torque and Weight; NABL Labs; Hybrid (detailed in scope of work)
Calibration Services - SERVICE AND CALIBRATION OF XRF SPECTROMETER FIRST YEAR QUANTITY 1 NUMBER; AS PER SCOPE OF WORK; AS PER SCOPE OF WORK; AS PER SCOPE OF WORK, Calibration Services - SERVICE AND CALIBRATION OF XRF SPECTROMETER SECOND YEAR QUANTITY ... WORK, Calibration Services ... AND CALIBRATION OF ...
Annual Maintenance Contract towards Quarterly Calibration of Prima Make Online Continuous Stack Emission Monitors for PM at our site and submission of Calibration Report 2 Nos
Emergency Repairs to Quality Control Lab for (R&B) Dharmapuri sub division office in Jagtial dist (Charge the expenditure to the QC charges available in the main work of Construction of IDOC, Jagtial)
(PH NO.:309339) QUALITY CONTROL FOR D-DIMER, 3 LEVELS, PACK OF 3X6X1 ML.. ACCEPTED DESCRIPTION is Same as tendered description. BRAND: LIQUICHEK D DIMER CONTROL. Manufactured by: M/s BIO - RAD LABORAT