Inspection, Testing & Audit Tenders in Uttar Pradesh

Carrying and handling of standard weights for testing, calibration and stamping of all road weigh bridges (04 Nos) and 500 Nos standard weights for a job duration of two year at Krishnashila Project.

Work of Overhauling, Calibration, Testing commissioning of Manometry Instruments SIEMENS make PLC control system along with Gate Valves, Electrical Drives all Control and Instrumentation system of ASH HANDLING SYSTEM including Repairing of damag

Design, Engineering, Supply, Fabrication, Erection, Testing, Calibration, Painting, Heat Insulation, Pre commissioning and Commissioning of one number of Bitumen Tank (25000 KL capacity) along with associated piping works, tank and piping civil works

Box type Gauge Cum Level as per RDSO Specification no. TM-58 (Latest Revision) for (BG) along with Spirit Level TM-52 (Latest Revision), supply along with calibration certificate issued By govt./NABL

ADJUSTABLE CLICK TYPE TORQUE WRENCH . 3/4 INCH SQUARE DRIVE, RANGE- 14-70 KG .M, WITH CALIBRATION CERTIFICATE OF ONE YEAR VALIDITY & MINIMUM 01 YEAR WARRANTY . MAKE- TRISTAR OR TORQUE MASATER OR TAPAR

ELECTRONIC SINGLE PAN DIGITAL ANALYTICAL BALANCE CAPACITY 220 gm WITH AUTOMATIC INTERNAL CALIBRATION ALONG WITH STANDARD WEIGHT BOX OF CLASS F1 CONTAINS 23 NUMBERS OF WEIGHT (RANGE FROM 1 mg TO 200 gm

Buffer Height Gauge CBC (Folding Type) Model no.:BHG-1(CBC) Measuring range: 850-1150 mm Accuracy:1.0mm supply with calibration certificate &packed in a carrying wooden box.MAKE-AOGE,PIE OR SIMILAR Fi

Pressure guage 4" dial all SS, GE 3/8" BSP side back connection 0-70 kg/cm2, Glycerine fill, Panel Mounting make MICRO, MASS or similar with NABL Calibration Certificate. Warranty- 01 Year.

Set of High tensile tools & Instruments as per Annexure- I. Make/Brand of TAPARIA OR J.K TOOLS OR MITUTOYO OR STANLEY OR EQUIVALENT NOTE: 1.CALIBRATION CERTIFICATE FOR THE INSTRUMENT'S SHALL BE TRAC

Micrometer dial type thickness gauge with calibration certificate. Range:- 0 to 30 mm/ 0 to 25 mm. Resolution:- 0.01 mm for analog/0.001 mm for digital. Foot Dial:- 4.0? 0.5 mm & pressure arrangement

DIGITAL WEIGHING SCALE, CAPACITY- 5000 K [DIGITAL WEIGHING SCALE, CAPACITY- 5000 KG (MINIMUM) , SPECIFICATION AS PER ANNEXURE ATTACHED Note: Digital Weighing Scale shall be supplied with calibration certificate under weights and measurement act. ]

NDT/Structural stability test of boom, tie rod end , boom foot pin and eye of 03Nos P and H-1900AL (Exc-1281, Exc-1381, Exc-1872), 02 Nos BE-1600 (Exc-2558, Exc-2635) and 1 nos Tata Hitachi 600V (Exc-2636), and 01 L and T CKD-300(Exc-2661) shovel

P.V. expansion (Angle) moulding size - 25 x 25 x 2 x 1850 mm long to N.E.Rly. Drg. No. SK - 1457/C Alt. 2, Fig. 2 item-1, colour - As per Drg. Note:- Material testing should be as per RDSO Specn. No. RDSO/2015/CG-02 (Rev. 1) with Amndt No. 01 of Nov 2017

P. V. expansion moulding ( Flat) size- 50 x 3 x 3600 mm long to N. E. Rly. Drg. No. SK-1457/C Alt. 2, Fig. 1 item 4, Colour.- As per Drg. Note:-Material testing should be as per RDSO Specn. No. RDSO/2015/CG-02 (Rev. 1) with Amndt No. 01 of Nov 2017.

Custom Bid for Services - 9050C25B98 Expert services of M/s Rotork Controls India Pvt Ltd for Calibration, troubleshooting and maintenance services for On-off valve, shutdown valve and actuators installed in New units MR Line item 10- Deputation of R.., shutdown valve and actuators installed in New units MR Line item 20-OT Charges/Hr on.. Similar Category Customized AMC/CMC for Pre-owned Products Customized AMC/CMC for Pre-owned Products

Overhauling and servicing of various Solenoid valves ,switches, transmitters, various Electrical, Pneumatic Actuator, C_I system of TAC ,IAC,cleaning and calibration of various analyzers, other instruments related work in AHP area unit 6,2x250MW,CTPS

Carrying and handling of standard weights for testing, calibration and stamping of all road weigh bridges (03 Nos), weighing system of RLS and 500 Nos standard weights for a job duration of two year

Routine/preventive/breakdown maintenance of electrical actuator (Auma /Rotork/ Limitorque make) for different models of various valves and Servicing/calibration and break down maintenance of power cylinder of Hot air Gates, feeder outlet gates

MAINTENANCE/SERVICES TO APFC PANELS RING MAIN UNITS HT CABLE TERMINATION JOINTS AIR BREAK SWITCH AIR CIRCUIT BREAKERS CT AND PT OF RMU AND PERIODICAL CALIBRATION OF RELAYS OF RMU UNDER GE E/M

REPAIR/MAINT OF 33/11 KV STEP DOWN TRANSFORMER, HT UG CABLE GOD CALIBRATION AND MAINT OF 11 KV SWITCH GEAR RMU VCB ETC ALONGWITH ALL EXTERNAL ELECTRIC SUPPLY WORK AT AF STN MANAURI

OH and servicing of various Solenoid valves switches transmitters various Electrical Pneumatic Actuator CI system of TAC IAC cleaning and calibration of various analyzers other instruments related work in AHP and other BOP area

REPAIR/MAINT OF 33/11 KV STEP DOWN TRANSFORMER, HT UG CABLE, GOD, CALIBRATION AND MAINT OF 11 KV SWITCH GEAR, RMU, VCB ETC ALONGWITH ALL EXTERNAL ELECTRIC SUPPLY WORK AT AF STN MANAURI

Carrying and handling of standard weights for testing, calibration and stamping of all road weigh bridges (05 Nos), weighing system of RLS and 500 Nos standard weights for a job duration of two year

CT Analyzer for Testing of Current Trans [CT Analyzer for Testing of Current Transformer (Specification attached). Make: Megger or Similar. NOTE:Test certificate and Calibration certificate from NABL authority should be submitted along with supply. ]

DIGITAL PRESSURE GAUGE ,RANGE:0-10 KG/CM SQUARE,L.C.-0.01KG/CM SQUARE WITH BOTTOM CONNECTION &PORT SIZE-3/8 INCH BSP, SUPPLY WITH CALIBRATION CERTIFICATE FROM NABL APPROVED LAB , MAKE-MIDLAND/ALTOP/WI

Portable wheel diameter gauge (BG) as per MODEL NO. WD.0 of PIE brand as per the specification below ( suitable for open wheel sets only) with calibration certificate of NABL approved LAB. (A) Me

SET OF AIR SPRING HEIGHT GAUGE FOR MEMU(GO &NOGO) AS PER DRG. NO.G/GA-1137,MATERIAL-SS 304, GO GAUGE & NOGO GAUGE ENGRAVED ,WITH CALIBRATION CERTIFICATE (NABL CERTIFIED LAB),MAKE-PIE OR SIMILAR

CT Analyzer for Testing of Current Trans [CT Analyzer for Testing of Current Transformer (Specification attached). Make: Megger or Similar. NOTE:Test certificate and Calibration certificate from NABL authority should be submitted along with supply. ]

Customized AMC/CMC for Pre-owned Products - AMC including calibration of Atomic Absorption Spectrophotometer AAS for Two Years at NETRA; Atomic Absorption Spectrophotometer Of Analytik Jena Make; Annual Maintenance Contract (AMC); Six-Monthly; No

Customized AMC/CMC for Pre-owned Products - AMC for One no 60MT PITLESS ELECTRONIC weighbridge including annual stamping calibration charges for weighbridge and standard weights from weights measures department installed at ICD Moradabad; --; Annu..

Customized AMC/CMC for Pre-owned Products - AMC for 3 years and procurement of calibration standard for laser particle counter Model LNFQ230; Ms PETROLABS INDIA PRIVATE LTD; Comprehensive Maintenance Contract (CMC); half yearly; No

ok kindly read the description and scope of work carefully before quoting kindly read the scope of work carefully

STATUTORY NDT INSPECTION CERTIFICATION HYDROTESTING AND PAINTING OF 3 Nos 150 LPG BULLTES AT PRAYAGRAJ BOTTLING PLANT

Annual Preventive Maintenance Contract of Direct Reading Emission Spectrometer includes 02 Nos. Preventive Maintenance, 01 No. Calibration plus 01 No. Breakdown if required for one year as per Scope of Work and Terms and Conditions

Set of CBC Gauges for Freight Stock as per Attached Annexure A (One set Consists 07 Different Types of CBC Gauges) with Calibration certificate issued from NABL/Gov. approved test Lab valid for One Ye

PRESSURE GAUGE SPECIFICATION:- MS BODY 3/8" BSP DIAL SIZE 4" THREADED BOTTOM FITTED RANGE 0 TO 40 KG/CM2 L.C. 1KG/CM2. ACCURACY PLUS-MINUS 1% WITH CALIBRATION CERTIFICATE. MAKE:-H.GURU, FIEBIG or Simi

Compression set assembly with spacers as per IS: 3400 Part 10/ Sec 1/2020 with calibration certificate of spacers and certificate of distortion of plates should not be more than 0.01 mm. Details of sp

Calibration of 20 Nos. Breath Analyzer make Tayaltech model ALPHA/KATS for validity one year due in March 2024 to Feb 2025 by OEM for use in JP Div Lobby ie FL,RE,JP,BKI

Box type Gauge Cum Level as per RDSO Specification no. TM-58 (Latest Revision) for (BG) along with Spirit Level TM-52 (Latest Revision), supply along with calibration certificate issued By govt./NABL approved Lab

Box type Gauge Cum Level as per RDSO Specification no. TM-58 (Latest Revision) for (BG) along with Spirit Level TM-52 (Latest Revision), supply along with calibration certificate issued By govt./NABL approved Lab

Custom Bid for Services - HIRING OF ITEM RATE SERVICE CONTRACT FOR CALIBRATION & MAINTENANCE OF LEL CUM OXYGEN DETECTORS FROM OEM AUTHORISED SERVICE PROVIDER FOR 3 YEARS Similar Category Annual Maintenance Contract Service - Laser Speed Meter

Facility Management Services - LumpSum Based - Industrial; Carrying handling and stacking unstacking from storage location of 500 Nos 50 kg each standard weights for testing verification calibration and stamping of all road weighbridges (05 Nos) for ..

P. V. expansion (Flat) moulding size- 25 x 3 x 3600 mm long to N. E. Rly. Drg. No. SK-1457/C Alt. 2, Fig. 1 item 8, Note:- colour of moulding - As per drg. & Material testing should be done as per RDSO Specn.N o.RDSO/2015/CG-02 (Rev.1 ) with Amndt No. 01 of Nov 2017.

P.V. expansion (Angle) moulding size - 20 x 25 x 6 x 6 x 3 x 1800 mm long to N.E.Rly. Drg. No. SK - 1457/C Alt. 2, Fig. 5 item-2, colour - As per Drg. Note:- Material testing should be as per RDSO Specn. No. RDSO/2015/CG-02 (Rev. 1) with Amndt. 01 of Nov17.

P. V. expansion moulding (J Type) size- 62 x 12 x 3 x 2000 mm long to N. E. Rly. Drg. No. SK-1457/C Alt. 2, Fig. 3 item 1, Matl. & Specn. as per drg. Material testing should be done as per RDSO Specn. No. RDSO/2015/CG - 02 (Rev. 1) with Amndt. 1 of Nov'17.

Custom Bid for Services - LUMPSUM PRICE INCLUDING GST FOR CARRYING OUT THIRD PARTY AUDITS UNDER TPCA REGULATIONS WITH COMBINED SCOPE OF BOTH T4S AND IMS REGULATIONS OF NG PIPELINE BY VALID PNGRB APPROVED TPIA AT DIFFERENT GAIL INSTALLATIONS AS PER ... Category Energy Audit Service ... Consultant Energy Audit Service ... Consultant Energy Audit Service ... Consultant Energy Audit Service ... Consultant Energy Audit Service ...

Facility Management Services - LumpSum Based - Industrial; Carrying handling and stacking unstacking from storage location of 500 Nos 50 kg each standard weights for testing verification calibration and stamping of all road weighbridges 05 Nos for 73..

Work of Overhauling, Calibration, Testing commissioning of Manometry Instruments SIEMENS make PLC control system along with Gate Valves, Electrical Drives all Control and Instrumentation system of ASH HANDLING SYSTEM of Unit 12, 2 X200 MW, BTPS

Customized AMC/CMC for Pre-owned Products - AMC including calibration of Automatic BOD COD Analyzer Portable spectrophotometer; BOD Analyser Make Hach Model BOD TrakII COD Analyser Make Hach Model DRB 200 COD Reactor and Portable spectrophotometer..

TORQUE WRENCH WITH TOMY ALONG WITH CALIBRATION CERTIFICATE. SIZE: 7-35 KG-MTR.SQUARE DRIVE - 1/2 inch OR 12.5 MM,TOMY SUIT FOR 7/8 inch HEX.BOLT. MAKE- MACMASTER OR TORQUE MASTER OR BRITOOL OR TAPARI