Inspection, Testing & Audit Tenders in Uttar Pradesh

appointing experience bidders to provide consultancy services to face and clear surveillance audit of year 2021 and reassessment audit of year 2022 along with calibration of Lab equipments.

REPAIRS AND PREVENTIVE MAINTENANCE OF VARIOUS POWER DISTRIBUTION TRANSFORMER RMU VCB WITH REPLACEMENT OF HT JOINT CABLES CALIBRATION AND TESTING OF HT PANEL ETC AT AF STN BAREILLY

REPAIR / RENEWAL AND MAINT OF EXTERNAL ELECTRIFICATION CALIBRATION OF VCB, IMPROVEMENT OF POWER FACTOR AT 33/11 KV AT RLB / GWALIOR ROAD AT MRS UNDER GE (EAST) AGRA

Digital Coating Thickness Gauge Range 0 - 2000 Microns, Ferrous " ELECOAT with NABL Calibration certificate Make brand 1) ELECOAT 2) POSITECTOR 3) ELCOMETER Certified that these brands are independ

MICRO-CONTROLLER BASED ELECTRONIC SPEED INDICATING & RECORDING SYSTEM AS PER RDSO SPEC.MP.0.3700.07(REV.-06) DT.OCT.2015 OR LATEST WITH CALIBRATION CERTIFICATE,MAKE- MEDHA / LAXVEN / AAL OR SIMILAR

Supply, installation and Commissioning of DI Relay Test Bench as per Specifications enclosed. Note: Item to be supplied along with Calibration certificate and warranty certificate. FIRM'S OFFER :- M

Supply installation and commissioning of Cummins PT Pump calibration/Test Stand, Test Stand Model:- AG PRECISION 777 at CRW/ Harnaut, Make- Cummins or equivalent.Technical specification and special c

MR-BP Collar type, LED Pressure gauge ( dual gauge) size -6 inch, capacity 0-10 kg/cm square with calibration certificate (NABL Certified Lab) make- Altop or similar

Custom Bid for Services - 200140159 Repair testing and calibration of ESP Controllers ESP Control Panels Cards of NTPC Unchahar Similar Category Operation and Maintenance Power House/Power Plant

Custom Bid for Services - Checking servicing testing and calibration of AVRs for 2Xone point five MW Jyoti and Kirloskar Make alternators Similar Category Facility Management Services - LumpSum Based

Custom Bid for Services - BIDDER MUST QUOTE TOTAL LUMPSUM PRICE INCLUDING SERVICE CHARGES AND GST WHICH SHALL ALSO INCLUDE PRE DECLARED TOTAL FLOOR PRICE OR TOTAL COST OF RESOURCES TO BE DEPLOYED FOR CALIBRATION AND MAINTENANCE OF LEL DETECTORS ... - CALIBRATION GAS

Please Refer to tender document

Please Refer to tender document

Custom Bid for Services - Repair and calibration VRU Equipments, Custom Bid for Services - VRU Software, PLC, SCADA, Custom Bid for Services - VRU SAT Recommissioning, Custom Bid for Services - CAMC of VRU Similar Category Customized AMC/CMC for Pre-owned Products Testing Service for On-Board/Commissioned Equipment/Instrument related to Plant Customized AMC/CMC for Pre-owned Products Testing Service for On-Board/Commissioned Equipment/Instrument related to Plant Customized AMC/CMC for Pre-owned Products Testing Service for On-Board/Commissioned Equipment/Instrument related to Plant Customized AMC/CMC for Pre-owned Products Testing Service for On-Board/Commissioned Equipment/Instrument related to Plant

DIGITAL SPRING BALANCE OF CAPACITY 50KG WITH 5GM/10GM ACCURACY WITH HOOK OF MAKE BULFYSS OR "OMEGA" OR "ATOM" OR "BIRUD" OR EQUIVALENT. CALIBRATION CERTIFICATE TO ACCOMPANY WITH SUPPLY

Repairing and reconditioning of CT, PT, testing, calibration and setting of relays of 4 way panels 6.6KV, 1250 Amp make Megawin installed at 10MVA, 33KV substation of Krishnashila Project.

Restoration of PLC SCADA works in 22 console panel of filter house Sensors Calibration SCADA Reprogramming and other allied works at 100 Cusec Ganga Jal WTP Siddharath Vihar Ghaziabad

Testing and calibration of relays installed in panels of 4 way panel 6.6 KV, 33 KV Panel, Field Switch unit and Transformers for 1 (One) year at Krishnashila Project.

For the work of Maintenance nd repair, Calibration and NABL Accreditation on Turnkey basis of Automatic Meter Test Lab situated at Chief Engineer (Dist) Office, Gailna Road, DVVNL Agra

AMC of Xeno Test Machine includes 02 Nos. Preventive maintenance and 01 No. Calibration and 02 Nos. Breakdown visits of all systems of machine as per scope of work.

Digital Rockwell Cum Brinell Hardness Tester, Model: TRSNB-250-D of Make:-Fine Instruments India or similar. Note: Calibration certificate shall be submitted from NABL/Any Govt. approved labs.

(i) INDUSTRIAL TYPE HIGH-DEFINITION, SEPARATED-SENSOR TEMPERATURE & HUMIDITY METER WITH ALARM AND LED DISPLAY. (AS PER MAKE/MODAL- INSIZE 0314-H423B OR SIMILAR). (ii) CALIBRATION CERTIFICATE WITH MINI

Analogue Dial Gauge, Specification:- (i) Least count should be 0.01mm, (ii) Range should be 0 to 10mm, (iii) Should have valid calibration & traceability certificate. Firm's offer Make/Brand-- INSIZE-

Portable digital refractometer for testing antifreeze coolant with display of range 0-100% of resolution 0.1% and Accuracy +-0.2% as per the specification attached. (NABL/OEM Calibration certificate s

DIAL TEST INDICATOR WITH LUG BACK. LEAST COUNT:- 0.01 MMMAKE:- MITUTOYO MODEL NO. 2046A OR FULLY EQUIVALENT OF STARRET.NOTE:- The firm shall submit calibration certificate along with the supply.

Digital Stroboscope Battery operated model no. TT-5200 with power pack & Battery charger cum Mains Adapter should be supplied with NABL or Govt approved agency calibration certificate. Accessories: Ad

30 kg's capacity digital weighing machine portable type for the use of CO2 gas checking in electric locomotives.Note: OEM calibration certificate (NABL certified) and warranty certificate to be suppli

Thread plug Gauge (GO & NO GO) M20*2.5 MM Pitch of Tolerance class 6H with calibration certificate from government approved test laboratory. Make:- Baker/graphic/Mitutoyo/Accurate or similar.

Electronic Toe Load Measuring Device (ETLMD) No.TM/SM/ETLMD/218 (Fourth Revision -2022), Offensive Extended warranty of machine & Calibration charges for 18 months (after standard warranty of 12 months)

Custom Bid for Services - Testing & Certification of Hydraulic Testing of Pressure Vessel/Lifting Machine Similar Category Calibration Services Testing Service for On-Board/Commissioned Equipment/Instrument related to Plant

Custom Bid for Services - Repair Work and Calibration of MEGGER make faulty Capacitance and Tan Delta Measurement Test Kit at Agra Substation Similar Category Operation And Maintenance Of Substation

P. V. expansion (Flat) moulding size- 20 x 2 x 1850 mm long to N. E. Rly. Drg. No. SK-14 57/C AIt. 2, item 6, Colour - as per Drg and Material testing as per RDSO Specn. RDSO/2015/CG 02(Rev. 1).Amudt No 1, Nov-17

P.V. expansion (Flat) moulding size -32x3x2000 mm long to N.E. Rly. Drg. No. SK - 1457/C Alt. 2, Fig.1, item-2, colour - As per Drg. Note:- Material testing should be as per RDSO Specn. No. RDSO/2015/CG-02 (Rev. 1) with Amndt No. 01 of Nov-2017.

P. V. expansion (Flat) moulding size- 20 x 2 x 1850 mm long to N. E. Rly. Drg. No. SK-1457/C AIt. 2, item 6, Colour - as per Drg and Material testing as per RDSO Specn. RDSO/2015/CG 02(Rev. 1).Amudt No 1, Nov-17

Custom Bid for Services - 9050C26A11 - Lining-up of an Agency for conducting survey of PSV/Isolation valve/CV passing, Insulation Effectiveness, Compressed Air leaks and Nitrogen leak Similar Category Energy Audit Service - Lumpsum Based

Dry and Wet Thermometer, Humidity Chamber, Analog Stopwatch, Steel Scale 0 to 300 mm, Steel Scale 0 to 600 mm, Steel Scale 0 to 1000 mm, Digital Vernier Calipers o to 150 mm, GEM Zip Reciprocating Tester 0 to 5 kgf 0 to 10 kgf Digital Counter 99999, Tumble Piling Tester 60 rpm, Weighing Balance Top Loading upto 20 kg, Electronic Balance upto 30 kg, Wet and Dry Thermometer 0 to 50 degree C, Digital Weighing Balance upto 510 g, KMI Yarn Strength Test 0 to 40 N 0 to 200 N, Goodbrand Tensile Strength Test, Analog Vernier Calipers 0 to 150 mm

1AIR DATA TEST SET DPS450, 2CABLE TENSIOMETER METER, 3CARBON MONOOXIDE METER, 4COMPASS SIGHT, 5DIAL TEST INDICATOR, 6DC AMPERE METER, 7DC REGULATED POWER SUPPLY, 8DC VOLT METER, 9DIGITAL INSULATION TESTER DIT 931, 10DIGITAL MICRO OHM METER MI 3242, 11DIGITAL MICROMETER, 12DIGITAL MULTIMETER, 13DIGITAL MULTIMETER TRUE RPM 1003, 14DIGITAL OM METER AGRONIC 53B, 15FEELER GAUGE, 16HIGH VOLTAGE IGNITION CABLE TESTER, 17HOLE GAUGE, 18HYDRAULIC JACK MAKE CANADA 1 T DA40, 19HYDRAULIC JACK MAKE CANADA 2 T DA42, 20HYDRAULIC JACK MAKE CHZECK 2 T, 21HYDRAULIC JACK TB 20, 22HYDROMETER SPECIFIC GRAVITY, 23HYGROMETER, 24HYGROMETER MODEL 123901, 25INSULATION TESTER K141, 26MICROMETER, 27PRESSURE GAUGE, 28PRESSURE GAUGE DIFFERENTIAL, 29PRESSURE GAUGE DIFFERENTIAL, 30PYROMETER INFRARED THERMOMETER, 31RAMP TESTER IFR 4000, 32RAMP TESTER IFR 6000, 33RAMP TESTER NAV 402AP, 34SPIRIT LEVEL, 35SPRING BALANCE, 36SPRING BALANCE DIGITAL, 37STOP WATCH ANALOG, 38STOP WATCH DIGITAL, 39STRAIGHT EDGE, 40SUCTION GAUGE, 41SURFACE PLATE 600M600M, 42TELESCOPIC GAUGE, 43THERMO METER ST 9269, 44TORQE SCREW DRIVER, 45TORQUE WRENCH, 46TYPE PRESSURE GAUGE, 47VERNIER CALIPER, 48VERNIER CALIPER DIGITAL, 49VERNIER HEIGHT GAUGE

Work of Overhauling, Calibration, Testing commissioning of SIEMENS make PLC control system along with Gate Valves, Electrical Drives , all Control and Instrumentation system of ASH HANDLING SYSTEM of Unit 11

Custom Bid for Services - AMC FOR ONLINE MONITORING SYSTEM AND CALIBRATION AT ETP AS PER TERMS AND CONDITION AT ANNEXURE A Similar Category Customized AMC/CMC for Pre-owned Products

REPAIR/MAINTENANCE OF 33 /11 KV HT,SUB STATION INCLUDING CALIBRATION /TESTING 0F 33/11 KV TRANSFORMERS, VCBs, HT SWITCH GEAR AND ALLIED WORKS AT BABINA CANTT UNDER GE BABINA

RFP for Testing of Power Transformer at Sec-83 and Sec-153 Receiving substation, Testing of relays and calibration of testing kits under PSI department of NMRC for Two Years

COMPREHENSIVE AND REPAIR/MAINT OF 33 KV SWITCH YARD POWER TRANSFORMER CALIBRATION OF SWITCH GEAR PROTECTION SWITCH YARD AND OTHER CONNECTED MISC WORKS AT CANTT AREA UNDER GE (I) KANPUR

STEEL MEASURING TAPE 30 Mtr. long of Class-1 according to EC standard IS: 1270/1965 along with Calibration, Make: Richter Chesterman or similar. HSN Code: 901788010 ACCEPTED MAKE-FREEMANS

TORQUE WRENCH, RATCHET TYPE CAPACITY 10-70 NM. 1/2" SQ. DRIVE. TORQUE-LIMITING DIRECTION- CLOCKWISE & COUNTER CLOCK WISE. CHROME PLATED FNISH, WITH NABL CALIBRATION CERTIFICATION. MAKE: 9 TORC / TAPAR

PRE-SET TYPE TUBULAR TORQUE WRENCH,1/2 INCH SQUARE DRIVE,RATCHET HEAD,TO BE FIXED AT 70 Nm WITH CALIBRATION CERTIFICATE (NABL CERTIFIED LAB) MAKE-BLUE POINT OR SIMILAR

ANALOG MEGGER 500V, 0-1000 MEGA OHM, METAL BODY, HAND OPERATED, SUPPLIED WITH LEADS , TEST AND CALIBRATION CERTIFICATE WITH MINIMUM 1 YEAR WARRANTY. firm offer make / brand-PICO or similar

DIGITAL PROTRACTOR, RANGE: 0-360 DEGREE,SIZE-250 MM,RESOLUTION-0.O5 DEGREE,ACCURACY=+/-0.15 DEGREE,MATERIAL STAINLESS STEEL WITH CALIBRATION CERTIFICATE(NABL CERTIFIED LAB),MAKE-MITUTOYO / INSIZE OR S

Supply, Installation and Commissioning of Breath Analyzer's Fuel Cell sensors compatible to Tayaltech make BA with one time yearly calibration. Note:-In this case, either the authorized agent/dealer o

Supply of Almen Gauge [Analog] -01 No.Almen Strips-'A' grade,thickness-0.051+0.001 in inch,flatness-+0.001-01 No.,Almen strip holder-01 No. with NABL accredited lab calibration certificate.

Digital out side micrometer ,measurement size-250-275 mm, L.C.- 0.001 mm, accuracy- + 4 um, type of display-LCD, with calibration certificate (NABL CERTIFIED LAB),Make-MITUTOYO/ INSIZE or similar