Inspection, Testing & Audit Tenders in West Bengal

THE CIVIL WORKS OF REGIONAL QUALITY CONTROL LABORATORY (RQCL) AT SILIGURI KHADYA BHABAN IN THE DISTRICT OF DARJEELING.

SELECTION OF AGENCY FOR ON-SITE SUPPLY OF QUALITY CONTROL EQUIPMENT AT ALL WBSWC MANAGED GODOWNS (2nd Call)

Engagement of an Independent Inspecting and Monitoring Agency for inspecting monitoring providing assurance of quality conducting or verification of necessary destructive and non destructive tests as per Quality Assurance Plan or Contract Document

boot high ankle leather dvs Boot High Ankle Leather Dvs ( 431 ) Technical Specifications Specification Specification Name Values Allowed Values SPECIFICATION Governing Specification Confirming to IND/TC/3844(a) standards (Specification issued by ... of Quality Assurance , ...

boot high ankle leather dvs Boot High Ankle Leather Dvs ( 292 ) Technical Specifications Specification Specification Name Values Allowed Values SPECIFICATION Governing Specification Confirming to IND/TC/3844(a) standards (Specification issued by ... of Quality Assurance , ...

Repair service and calibration of Laboratory electric oven, Calibration of Electronic Balance, Repair and Calibration of Muffle furnace, Calibration of CBR Test apparatus, Calibration of Weighing scale digital, Calibration of Electronic weighing scal

Zinc coated HTS Hex head bolt of size 5/16" x 18 TPI x 1" long of SAE Grade 5. Material to be supplied with one each of flat and spring washers of min 1 .5mm thickness of make TVS/unbrako/LPS /DFL/PFL

Hex head cap screw, 5/8" x 11 TPI x 8" length to IS-1367 (Pt-III) Class 8.8 or BS 1768 Gr. S or SAE Gr.-5, with Stainless Steel Nut, Spring Washer to IS 3063 and Flat washer IS-2016, in one Set.

H.H.H.T Bolt-5/8" dia X 11 TPI X 1 1/2" long (TVS/GKW/UNBRAKO/UNB make only) with suitable Nyloc nut-1 no, suitable spring washer-1 no as a set Firm's Offer : Make/Brand : HEX BOLT,N,NUT-TVS/SW-FORBES

A SET OF P PIPE BOLT CONSISTING OF 02 ITEMS HEX HEAD BOLT-5/6"-24 TPI, UNF-2A Threads x 1" length to EMD DRG No: 181339, Alt "Ea", Qty=32 nos (DLW PT No: 19011052) SPLINE HD. BOLT-12 Points, 5/6"-18

High tensile hex head bolt of sae grade 5 of size 1/2" x 13 tpi x 2-1/4" length with nyloc nut and 2 nos flat washer and 01 no spring washer of makes tvs , unbrako , lps or pfl only Accepted make: TV

H.T.HEX HEAD BOLT DIA 3/4"-11 TPI UNC X2 3/4" LONG GRADE "S" AS PER ANS B 1821/1965 WITH ONE RECTANGULAR SECTION SPRING WASHER OF SIZE DIA 3/4" AS PER 1802/1951 AND H.T.HEX HEAD NUT OF DIA 3/4" GRADE

HIGH TENSILE HEX HEAD BOLT OF SIZE 1/2" X 13 TPI UNC X 2-1/4" LENGTH OF GRADE 5 WITH NYLOC NUT 01 NO AND SUITABLE FLAT WASHER 2 NOS , SPRING WASHER 01 NO OF MAKE TVS, UNBRAKO , TUFF ONLY accepted make

HEX.HD.BOLT 5/8 x 11 TPI,UNC x 2 1/4" LONG (FULLY THD) TO B.S:1768 GRADE S WITH ONE NUT, AND ONE SPRING WASHER TO IS.3063/72 FOR ALCO B.G.LOCOS THREADS: ROLLED, UNC-2A SERIES, AS PER BS:1580. ALL OTHE

P.V. expansion (Channel) moulding size - 20 x 31 x 2 x 2000 mm long to N.E.Rly. Drg. No. SK-1457/C Alt. 2, Fig. 4 item 1, colour as per drg. and material testing as per RDSO spec. no. RDSO/2015/CG-02

P.V. expansion moulding (J type) size - 62 x 12 x 3 x 2000 mm long to N.E.Rly. Drg. No. SK-1457/C Alt. 2, Fig. 3 item 1, Matl. & Specn. as per drg. Material testing should be done as per RDSO Specn.

P.V. expansion (Channel) moulding size - 20 x 31 x 2 x 2000 mm long to N.E.Rly. Drg. No. SK--1457/C Alt. 2, Fig. 4 item 1, colour as per drg. and material testing as per RDSO spec. no. RDSO/2015/CG-02

P.V. expansion (Angle) moulding size 25 x 25 x 2 x 1850 mm long to N.E.Rly. Drg. No. SK 1457/C Alt. 2, Fig. 2 item-l, colour As per Drg. Material testing should be as per RDSO Specn. No. RDSO/2015/CG-

P.V. expansion (Channel) moulding size - 32 x 32 x 2.5 x 1800 mm long to N.E.Rly. Drg. No. SK-|457/C Alt. 2, Fig. 2 item- 6, colour as per drg. and material testing as per RDSO spec. no. RDSO/2015/CG-

As per tender documents

Inspection, Health Checkup and Calibration of CAB 803 in existing Slow Speed Balancing Machine , Qty. 1 no., MAKE Schenck Rotec India Ltd. (M/S SRIL).

Maintenance and Calibration of Local methane detector Ultima XE SL No. C15-400186884-10-008 and C15-400186884-10-003 of Shyamsundarpur Colliery (2nd call)

STANDARD OIL, conostant 75cSt, Blank oil with calibration certificate, each bottle of 400 Grams. HSN Code: 38220190. Firm's offer : same as above , Make /Brand : CONOSTAN

GAUGES FOR FLAT TYPE CENTRE PIVOT TOP AND BOTTOM AS PER ANNEXURE-A, FIRM SHOULD SUBMIT CALIBRATION CERTIFICATE ALONG WITH THE MATERIALS Frim contact : PRASAD

Lock Parallel and Thickness Gauge as per Drg. No. WD-84073- S-59- RC. The gauge must be supplied with calibration certificate. Accepted Make/Brand:PRASAD

DIGITAL TWO POINT INSIDE MICROMETER, RANGE 200-225 MM,LEAST COUNT 0.001 MM WITH CALIBRATION CERTIFICATE TRACEABLE TO NATIONAL STANDARD MAKE-MITUTOYO/FORBES/YUZUKI ONLY .

Set of Trammeling Gauge for Trammeling Inspection of Casnub 22NL, NLB, NLM, HS bogie with Calibration Certificate as per Annexure attach. Accepted Make/Brand: PRASAD

Kit of 15 Gauges of MARK-325 Draft gear as per annexure-A along with calibration certificate from Govt/NABL approved firm Accepted Make: PRASAD

Custom Bid for Services - CALIBRATION AND REPAIRING OF TAURUS MKS OFFLINE FAULT LOCATOR SET HAVING SR NO 5850 UNDER GOMD I HOWRAH THROUGH GEM PORTAL

Custom Bid for Services - CALIBRATION OF MASTER EQUIPMENTS OF C AND I LABORATORY FOR NTPC FARAKKA Similar Category Operation and Maintenance Power House/Power Plant

Customized AMC/CMC for Pre-owned Products - AMC for Repairing and Calibration of Digital Moisture Meters; A GRAIN INDIA; Annual Maintenance Contract (AMC); Annually; No

Steel Tape 0 to 15 Meters, Steel Tape 0 to 5 Meters, Steel Scale 0 to 300 mm, Clamp Meter 0 to 1000 Amps, Ammeter at Power House 0 to 1600 Amps, Vernier Caliper 0 to 150 mm, Filler Thickness Gauge .05 to 1 mm, Steel Tape 0 to 150 Meter, Coat Meter Digital 0 to 600 Micron, Tong Tester AC DC 0 to 600 Amp, Volt Meter of SAW Machine 0 to 100 V, Ammeter of SAW Machine 0 to 1500 Amp, Volt Meter of Welding Machine 0 to 100 V, Voltmeter at Power House Bus Bar 0 to 500 V, Meager 0 to 1000 V, Pressure Gauge 0 to 10 Kg per sq cm, Stop Watch Analogue 1 to 100 Racer, Elcometer Coat Meter 0 to 600 micron, Stop Watch Digital 1 to 10 Racer, Ammeter of Welding Machine 0 to 600V, 0 to 600 Amp, Steel Scale 0 to 600 mm, Steel Tape 0 to 3 M, Dip Stick Scale 0 to 350cm, Ammeter at Power House 0 to 3200 Amps, Ammeter at Power House Bus Bar 0 to 1250 Amp, Ammeter at Power House HT 0 to 100 Amp, Micrometer 0 to 50 mm, Micrometer 0 to 150 mm, Vernier Caliper 0 to 300 mm, Tong Tester AC DC 0 to 300 Amp, Laser Distance Measure Range 0.05 to 40 M, Digital Vernier Calliper Range 0 to 200 mm, Vernier Calliper Range 0 to 150 mm, Steel Tape 0 to 30 Meter, Filler Thickness Gauge 0.05 to 0.80 mm, Filler Thickness Gauge 0.07 to 1.00 mm, Digital Multimeter 0 to 100 Amp, Dial Indicator 0 to 50 mm, Dial Gauge 0 to 500 T, Out side Spring Caliper 12 inches, In side Spring Caliper 12 inches, Electrician Hammer

Offering necessary Coordination and all other related activities in connection with laboratory based quality assurance to NS (Batch-5) with different modules of ISGPP, which will be held in the month of January,2024

Offering necessary Coordination and all other related activities in connection with laboratory based quality assurance to NS (Batch-4) with different modules of ISGPP, which will be held in the month of Decmeber,2023

18/BZRGP/2023-24/1

Htdrotest of 1X600 MT Horton spher and miscellaneous works at Malda BP

Calibration of 100 KN flexural testing machine, Calibration of Electronic balance, Calibration of Serological water bath, Calibration of Laboratory electric oven, Repair Servicing and Calibration of Ductility testing machine

Set of items for Lube Oil Line To Cam Sh [Set of items for Lube Oil Line To Cam Shaft Bearing as Detailed: (1) BOLT.. Hex head 1/4 INCH - 28 TPI x 5/8 INCH - Oil line to rocker arm shaft to EMD Pt.No.181311 and BLW Pt.No.19010059, Qty/Set - 32 Nos. ... 20 TPI x ...

Set of fasteners consist of following it [Set of fasteners consist of following items: 1. Hex head bolt size 5/16 inch x 18 TPI x 1-3/4, Grade 8 (thread length 1 inch), Qty/set. - 01 no, 2. Nut 5/16 inchx 18 TPI , Qty/set. - 01 no, 3. Spring washer 5/16 inch, thickness 1.5 mm Qty/set. - 01 no, 4. Flat washer ID 5/16 inch, OD 3/4 inch, thickness 1.5 mm, Qty/set. - 02 nos. All the set of material should be lead plated. Note: A test certificate (TC) & Guarantee certificate (GC) is also required from supplier. ]

Set of items for Lube Oil Line To cam shaft Bearing as Detailed : (1) Bolt Hex head 1/4 Inch - 28 TPI x 5/8 Inch - Oil line to rocker arm shaft to EMD Pt.No. 181311 and BLW Pt.No. 19010059 , Qty - 32 Nos. (2) Bolt Hex head 1/4 Inch - 20 TPI x 3/4 Inch, Oil line to Cam shaft Bearing to EMD Pt.No. 179795 and BLW Pt.No. 19010011 , Qty - 32 Nos. (3) Washer 1/4 SPR LK to EMD Pt.No. 103319 and BLW Pt.No. 19390014 , Qty/Set - 64 Nos. Make:-TVS, UNBRAKO or Similar.

Supply installation and trials of Los Angeles Abrasion Testing Apparatus with training for Quality Control II Division at Siliguri

E-TENDER FOR SELECTION OF AGENCY FOR ON-SITE SUPPLY OF QUALITY CONTROL EQUIPMENT AT ALL WBSWC MANAGED GODOWNS

THE ELECTRICAL WORK OF THE REGIONAL QUALITY CONTROL LABORATORY (RQCL) AT SILIGURI KHADYA BHABAN IN THE DISTRICT OF DARJEELING.

Carrying out Road Safety Audit of existing roads of State Highways of SH10, SH12 and SH16 in Package 1, in the State of West Bengal.

Set of Nickel Chrome Test Panels having crack depth of 20, 30 and 50 microns (1 Set of each 20, 30 & 50 Micron Ni-Cr panel in pairs. (Total 06 Items) on individual panels as per RDSO Spec No. M&C/NDT/

Fluorescent magnetic powder (water based) for wet magnetic particle examination as per RDSO SPEC. NO. RDSO/M&C/NDT/109/2007 (Rev-2) issued on October-2020 or latest. Firm should supply the material along with test certificate from NABL accredited lab.

Set of Nickel Chrome Test Panels having crack depth of 20, 30 and 50 microns (1 Set of each 20, 30 & 50 Micron Ni-Cr panel in pairs. (Total 06 Items) on individual panels as per RDSO Spec No. M&C/NDT/

Band saw blade, Size 6270 x 41 x 1.3 mm x 1.4/2 TPI, M-42, Band Saw blade 4725 x 41 x 1.3 mm x 1.4/2 TPI, M-42

Set of 02 Items consisting of (1) Bolt Hex Head of Size 5/8" X 11 TPI UNC X 1-1/2" long to Part No: 271558 and BLW Part No. 19016190 Qty 32 Nos. (2) Washer Special Damper to EMD Part No. 9532904 and B

Set of Adopters comprising of:- [1] Size 1/2" BSP (Female) to 3/8" BSPT (Male) to ICF Drg. no. ICF /STD/3-5-091 Item no.2 - Qty - 01 nos. [2] Size M22 x 1.5P (Female) to 1/2" NPT 14 TPI (Male) to Sket