Loading
Loading…
Loading…
2,440 results • Best match
Bolt Hex head 3/8 inch 16 TPI x 1 1/2 inches long cadmium coated and nylock nut with two flat washer and one spring washer. Material BS1768, Gr.S thread fit rolled UNC series as per BS 1580. Special
BOLT HEXAGONAL HEAD 3/8" X 1 1/2" LONG 16 TPI THREAD UPTO 35MM OR FULL THREADED AS PER FIRM OFFER. TO S.RLY DRG NO.SR/D/BT-34/M , MATERIAL - STEEL CLASS 4 ZINC PLATED OR PHOSPHORATED TO IS:1875.
HIGH TENSILE HEX HEAD BOLT OF SIZE 5/8" X 11 TPI X 1-3/4" LENGTH UNC WITH SUITABLE NYLOCK NUT , ONE SPRING WASHER, ONE PLAIN WASHER OF MAKE TVS, UNBRAKO,LPS, PFL MAKE ONLY accepted make/brand: bolt a
HIgh tensile hex head bolt sae grade 5 of size 3/8" x 16 tpi x 2-1/4" length with nyloc nut and 2 nos flat washer and 01 no spring washer of makes tvs , unbrako , lps , pfl only.
High speed steel hand hacksaw blade,type-A to size 300mm x 12.5mm x 0.63mm x pitch-1.4mm x 18 TPI (teeth per inch) as per IS: 2594-2003 conforming to material designation as per clause 6.1 of IS: 7291
High speed steel hand hacksaw blade,type-A to size 300mm x 12.5mm x 0.63mm x pitch-1.4mm x 18 TPI (teeth per inch) as per IS: 2594-2003 conforming to material designation as per clause 6.1 of IS: 7291
HIGH TENSILE HEX HEAD BOLT OF SIZE 5/8" X 11 TPI X 1-3/4" LONG WITH SUITABLE NYLOCK NUT AND ONE SPRING WASHER AND ONE PLAIN WASHER OF MAKE TVS , UNBRAKO , TUFF ONLY. accepted make: BOLT/NUT: TVS, SW:
HIGH TENSILE HEXAGONAL HEAD BOLT OF SIZE 3/4" UNC THREAD X 10 TPI X 1 - 3/4" LONG OF GRADE 8.8 WITH ONE FLAT AND SPRING WASHER OF MAKE TVS / TUFF/ UNBRAKO / DFL ONLY. ACCEPTED MAKE: TVS FOR BOLT, FORB
P.V. expansion (Flat) moulding size -32x3x2000 mm long to N.E.Rly. Drg. No. SK - 1457/C Alt. 2, Fig.1, item-2, colour - As per Drg. Note:- Material testing should be as per RDSO Specn. No. RDSO/2015/C
P.V. expansion (Flat) moulding size -32x3x2000 mm long to N.E.Rly. Drg. No. SK - 1457/C Alt. 2, Fig.1, item-2, colour - As per Drg. Note:- Material testing should be as per RDSO Specn. No. RDSO/2015/C
Annual Rate Contract for Calibration of Relays installed in High Tension and Low Tension Power panels at PHBPL and PHDPL Haldia
7300 Pure Dye Calibration for 7300 RT PCR, including P/N 4328260-CBL, Premium USB Type A-B, 3 M as FOC
Custom Bid for Services - ANNUAL MAINTENANCE SERVICING AND CALIBRATION OF MECHANICAL TYPE WEIGHING MACHINE AS PER LIST OF MACHINE AND WORK SCHEDULE
Custom Bid for Services - ANNUAL MAINTENANCE SERVICING AND CALIBRATION OF UNIVERSAL TENSILE TESTING MACHINE AS PER LIST OF MACHINE AND WORK SCHEDULE
Repair and Calibration of 04 nos Bosch make Fuel Injection Pumps (FIPs) suitable for BS6D170 Engines applicable to BEML make D155 Dozer .
Calibration of 8 nos of Theodolite and 11 nos of level machines survey instruments deployed in different mines under Satgram-Sripur Area
Calibration, Repairing and Testing of Accessories, Capacitances of Tan Delta Bridge Model MLS-11DA & HLS-12A, SR No. SE 020022015 Or Similar.
SHANK LENGTH GAUGE(TRANSITION) AS PER RDSO DRG NO- WD-84073-S-26-RC & SUPPLY WITH CALIBRATION CERTIFICATE. ACCEPTED: FIRM OWN MAKE.
PRECISION LCR METER, BENCH TOP TYPE AS PER ENCLOSED SPECIFICATION ALONG WITH CALIBRATION CERTIFICATE TRACEBLE TO NABL accepted make/brand: SCIENTIFIC SM6023
Custom Bid for Services - ONSITE CALIBRATION OF ENERGYMETERS FOR PP-2 & PP-3 Similar Category Operation and Maintenance Power House/Power Plant
9136173771, 9136173761, 9153105401, 9153104801, 9114308293, 9156994001 BOQ Title RHM23R5115 Calibration Standards MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Document required from seller Certificate (Requested in ATC), Additional Doc 1 (Requested in ATC), Additional Doc 2 (Requested in ATC), Additional Doc 3 (Requested in ATC), Additional Doc 4 (Requested in ATC), Compliance of BoQ specification and supporting document *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer Bid to RA enabled No Type of Bid Single Packet Bid Primary product category 9136173771 Time allowed for Technical Clarifications during technical evaluation 5 Days Bid Number ( ) : GEM/2024/B/4912519 Dated : 03-05-2024 Bid Document 1/8 Inspection Required (By Empanelled Inspection Authority/Agencies pre- registered with GeM) No Evaluation Method Total value wise evaluation Bid Details EMD Detail Required No ePBG Detail Required No Splitting
Engagement of an Independent Inspection n Monitoring Agency (IInMA) for inspection, monitoring, providing assurance of quality, conducting verification of necessary destructive and non-destructive test as per approved Quality Assurance
Structural Health Assessment of Block IIB, Doctors Building, Gobra Housing Complex by NDT testing and visual survey with report preparation and recommendation for restoration work at 32, Gobra Road, Kolkata 700 014 during the year 2024 2025.
Set of Items Consisting of: 1) Pre mixed black magnetic particle as per RDSO/M&C/NDT/109/2007 - Rev 2 (October 2020) (wet method) in oil media in 500 ml dispenser operating aerosol container (net cont
Set of Items Consisting of: 1) Pre mixed black magnetic particle as per RDSO/M&C/NDT/109/2007 ? Rev 2 (October 2020) (wet method) in oil media in 500 ml dispenser operating aerosol container (net cont
Set of Items Consisting of: 1) Pre mixed black magnetic particle as per RDSO/M&C/NDT/109/2007 - Rev 2 (October 2020) (wet method) in oil media in 500 ml dispenser operating aerosol container (net cont
Supply of Single Crystal Normal Probe, frequency-2.5Mhz, 20mm dia to RDSO Specification No.M&C/NDT/116/2000,Rev 2, of Modsonic make only, which will be used in Modsonic make USFD as a consumable for b
ERBA NORM, MULTI CAL, AUTO WASH ERBA, CRP ERBA, RF ERBA, SR FERITTIN, QUALITY CONTROL ERBA
Rate Contract of Laboratory Instruments for Vaccine Issue Section and Quality Control Division of IAHVB Kolkata
CONSTRUCTION OF MATERIAL TESTING LAB AT GP OFFICE
P.V. Expansion (Flat) moulding Size-25x3x2000 mm long to N.E.Rly. Drg. No. SK-1457/C, Alt.2, Fig. 1 item 1, colour - As per Drg. Note - Material testing should be as per RDSO Specn. No. RDSO/2015/CG-0
P.V. Expansion (Flat) moulding Size-25x3x2000 mm long to N.E. Rly. Drg. No. SK-1457/C, Alt.2, Fig.1 Item1, colour - As per drg. Note- Material testing should be as per RDSO Specn. No. RDSO/2015/CG-02(
P.V. Expansion (Flat) moulding Size-25x3x2000 mm long to N.E. Rly. Drg. No. SK-1457/C, Alt.2,Fig. 1 Item1, colour - As per drg. And material testing as per RDSO spec- RDSO/2015/CG-02(Rev-1) withamend-
NDT (RT) at GRSE Units for Naval Shipbuilding
As per tender documents
A set of Nickel-Chromium Test panels as per RDSO Spec: RDSO/M&C/NDT/106/2007(Rev-2) having crack depth of 20, 30 and 50 micron on individual panels.Technical specifications should be as per annexure-A
Red Dye Penetrant Kit consisting of Red Dye Penetrant, Remover/Cleaner and Developer in the ratio 1:4:4 as per RDSO Specification No. M and C/NDT/105/2001 of April'2001 or latest. i. Visibility: Type-
Red Dye Penetrant Kit consisting of Red Dye Penetrant, Remover/Cleaner and Developer in the ratio 1:4:4 as per RDSO Specification No. M and C/NDT/105/2001 of April'2001 or latest. i. Visibility: Type-
Red Dye Penetrant Kit consisting of Red Dye Penetrant, Remover/Cleaner and Developer in the ratio 1:4:4 as per RDSO Specification No. M and C/NDT/105/2001 of April'2001 or latest. i. Visibility: Type-
Red Dye Penetrant Kit consisting of Red Dye Penetrant, Remover/Cleaner and Developer in the ratio 1:4:4 as per RDSO Specification No. M and C/NDT/105/2001 of April'2001 or latest. i. Visibility: Type-
MPT CONSISTING OF OF PRE MIXED BLACK MAGNETIC PARTICLE AS PER RDSO/M&C/NDT/109(REV- 1)TYPE- 1-2007(WET METHOD) IN OIL MEDIA IN 500 ML DISPENSER OPERATING AEROSOL/CONTAINER (NET CONTENT 400ML/280GM).AL
Set of MPT kit consisting of (1) pre mixed black magnetic particle as per RDSO spec. no RDSO/M&C/NDT/109 (Rev- 2 ) OCT-2020 (Wet method ) in oil media in 500 ml dispenser operating aerosol /container
SET OF MPT KIT CONSISTING OF :-(I). PRE MIXED BLACK MAGNETIC PARTICLE AS PER RDSO/M&C/NDT/109/2007-REV-2(OCTOBER 2020)(WET METHOD)IN OIL MEDIA N 500 ML. DISPENSER OPERATING AEROSOL CONTAINER(NET CONTE
Non aqueous Developer (Spray type application), Form-D in Aerosol Cans of Capacity 500 ml,Net Content 400 ml, conforming to IS:12889/1989 and RDSO Spec No. M&C/NDT 105/2001 used in Dye Penetrant Testi
Set of Items Consisting of 1)Pre mixed Black Magnetic Particle as per RDSO/M&C/NDT/109/2007-Rev 2(october-2020) (Wet Method) in Oil Media in 500 ml Dispenser operating aerosol Container(net content-40
Custom Bid for Services - Annual Maintenance Contract and Calibration of 20KN capacity Automatic Electronic Tensometer without spare parts as per scope of work
Custom Bid for Services - Annual Maintenance Contract and calibration of 20KN Capacity Automatic electronic Tensometer without spare Parts as per scope of work
ANNUAL CALIBRATION WITH CI TEST WEIGHTS (750PCS. x 20KGS. EACH) FOR NEWLY CONSTRUCTED 60T DOCPIV ROAD WEIGHBRIDGE AT DAMAGORIA MINES UNDER CV AREA.
Magnetic stand similar to Mitutoyo model 7010s10, Dial Indicator similar to Mitutoyo model No.- 2109S 10.Graduation-0.001mm, Along with NABL Calibration certificate.
TAPER PLUG GAUGE FOR ROTOR SHAFT OF 6FRA-6068 TRACTION MOTOR WITH CALIBRATION CERTIFICATE. AS PER RDSO DRAWING NO. SKEL-5032 ALT-0.