Inspection, Testing & Audit Tenders in West Bengal

Bolt Hex Head 9/16 inch x 18 TPI x 3-1/2 inch to BLW Part No.19011260 and DLW Drg. No. 181465 Alt- Ca or Latest. Firms Offer Make/Brand: as per Tender

SUPPLY OF WHEEL SENSOR WITH PROTECTION TUBE OF FRAUSCHER MAKE MSDAC ALONG WITH CABLE LENGTH OF 10 Meters, AS PER RDSO SPEC.NO: RDSO/SPN/176/2013 (Version.3) WITH TPI INSPECTION. Firm`s Offer - FRAUSC

Supply of MSDAC spares of ALTPRO (Sigma Rail Systems Pvt. Ltd) make: Input Amplifier Module (UP), Part no. AP215629 as per RDSO specification no. RDSO/SPN/176/2013 Ver 3.0 or latest (Inspection by TPI

Engagement of Highly Professional Manpower on annual contract basis for carrying out oil Testing and Packaging Material Testing jobs at QC Laboratory of IOCL-LBP Kolkata for the period of two years.

Long travel wheel for crane no. 2357 and 1965 with material specification medium carbon alloy steel with hardness 38 to 42 HRC, as per Railway drawing no. S 1951, with material testing certificate.

Calibration Services - Annual Calibration and Servicing of 05 Nos of Riken Keiki make Model GX-3R with Four Sensors and Model GX-3R PRO with Five Sensors; Gas analysis; OEM or any of his Authorised Agency Distributor or any agency; Buyer premises (on..

Statutory Testing including Hydrotest, NDT Tests, RLA and allied works with Painting of 1 No of 1400MT Horton Sphere and 3 Nos of 150 MT Above Ground Bullets at Raninagar LPG BP

Inspection of all TG bearings (1 to 7), NDT of Brg.- 1 and 2, set right of Turbine insulation and inspection, rectification of generator seal system of Unit 5 TG set, BTPS.

DYE PENETRANT FLOURESENT EQUIVALENT TO ORION-FP-23 WATER WASHABLE POST EMULSIFIED TO RDSO SPECN No: M&C/NDT/105/2001. Firm offer - Brand MACRO-WWP25. Packed in 20 ltrs. HDPE Jars.

Fluoresent Penetrant as per RDSO specification M and C/NDT/105/2001. i.Visibility: Type I- Fluorescent Dye. ii. Wash-ability: Method A-Water washable. iii. Sensitivity Level: Level 2-medium. iv. Devel

Fluoresent Penetrant as per RDSO specification M and C/NDT/105/2001. i.Visibility: Type I- Fluorescent Dye. ii. Wash-ability: Method A-Water washable. iii. Sensitivity Level: Level 2-medium. iv. Devel

D72A, FP 97A M, E58D, ORISOL, MI GLOW800, Fluorescent penetrant (Q3)

Calibration Services - HYRDROSTATIC PRESSURE TEST OF KIT OXYGEN CHARGING PORTABLE; HYRDROSTATIC PRESSURE TEST; NABL Labs, Any other Government Approved Labs/Service Provider; Lab

10 ltr C S AL2 Cylinder for Zero Calibration 99 999 PURE N2 with Test certificate SS Regulator for SOx NOx analyser, 10LTR AL2 C S CYLINDER FOR SPAN CALIBRATION SO2 800 NO 800 CO 400 CO2 16 BAL N2 with Test certificate SS Regulator, ZERO GAS CYLINDER 0 4 O2 BALANCE N2 CYLINDER CAPACITY 10 LIT with Test certificate SS Regulator, SPAN GAS CYLINDER 8 2 O2 BALANCE N2 CYLINDER CAPACITY 10 LIT with Test certificate SS Regulator, 85 H2 BALANCE N2 CYLINDER 10 LTR with with Test certificate SS Regulator, H2 Gas Cylinder Filling 99 999 Vol Grade 5 Capacity 10 leter WC MOC CS with Test certificate SS Regulator, CO2 Gas Cylinder Filling 99 999 Vol Grade 5 Capacity 10 leter WC MOC CS with Test certificate SS Regulator

Custom Bid for Services - Calibration of Standard Master Pressure gauges of different range and different make for C and I Lab of Unit 1 to 8, MTPS, DVC Similar Category Calibration Services

Testing, Adjusting and Calibration of Non-Automatic Weigh Bridges of Capacity 60 MT and Supplying, Fitting and fixing of Spare Parts of Weigh Bridges

High tensile heavy duty corrosion resistance ground thread rolled forged shaft EN-32 bright finish Dia. 30 mm X550 mm long X 8 TPI pitch with bolt bright finish . Make- Micro/ Super/MTC/JK or similar

Gauze Than 60 cmX20 mtr. Made of 100% cotton, 52 TPI (both Horizontal & Vertical). Weight of each than should not be less than 395 gms, piece of gauze should sink completely in water within 10 seconds

BIMETALLIC BAND SAW BLADE OF LOOPED CONFIGURATION CONSISTING OF SPRINGSTEEL BACKING STRIP OF HSS CUTTING TEETH. MATERIAL OF AISI M42. SIZE :6200 X 41 X 1.3MM 4-6 TPI WITH ZERO DEGREE RAKE ANGLE FOR ME

Nuts finished Hex. Head 1/2 inch - 13 TPI (UNC-2B) to DLW Drg.No.IP60000 - 018 Alt.No.R1 and to DLW Part No.15350149 for the maintenance of HHP Diesel Locomotives. Firm's offer: Same as above. Make/ B

CAP SCREW HEX HEAD 1/2 INCHS - 13 TPI X 2.1/4 INCHS LONG DLW DRG. NO. - TPE - 13 - 0044, ALT.- 't' SL. NO. - 41.(Supply with Mfg's original pre inspection certificate & packing). Accepted Firm's Offer

QD Relay (Current diffrencial relay) relay QD Ref. TR701, Spec. No. R28/1, Drg. No. CLW/ ES/SK- 1/R28. Firm's Offer: QD Relay Current diffrencial relay Type TR701. TPI Agency will inspect the stores a

HEXAGONAL HEAD BOLT WITH NUT AND SPRING WASHER. Specification: (a). BOLT 3/8" 16 TPI - UNC 1 3/4" FULL LENGTH ,1" THREADED WITH ZINC PLATING TO SPECN. B.S.1768 GRADE'S'. (FORGE AND ROLLED THREAD) = 1

Gauze Than 60 cmX20 mtr. (52 TPI both Horizontal & Vertical). Weight of each than should not be less than 395 gms, piece of gauze should sink completely in water within 10 seconds or less.Item Code No

Set up of material testing laboratory at haridaspur gram panchayat (Construction Material Testing Room) Activity ID- 40105557

Annual Rate contract for Statutory Testing and Calibration of Lifting Machines Tools and Tackles Pressure Vessels and EOT Cranes

Custom Bid for Services - REPAIR SERVICE AND CALIBRATION OF FUEL FLOW BULK METER Similar Category Repair and Overhauling Service

RATE CONTRACT SERVICING/REPAIR and CALIBRATION OF LASER ALIGNMENT MACHINES OF M/S EASY LASER MAKE AT HALDIA REFINERY

DIGITAL DIAL THICKNESS GAUGE,SIZE-0-20 MM,GRADUCATION-0.001MM WITH NABL CALIBRATION CERTIFICATE,MAKE- MITITOYO / INSIZE OR SIMILAR

Custom Bid for Services - Calibration and NABL Certification of different instruments of Chemical Laboratory DVC RTPS for two years

Custom Bid for Services - Annual Rate contract for Maintenance servicing and calibration of 02 two nos of Bomb Calorimeter

Repairing of Quality Control Sub-Division Office and Murshidabad Highway Division No.II Office

Magnetic Powder, Fluorescent type (oil base) confirming to RDSO Specification RDSO/M&C/NDT/109/2007, (Rev-2) & IS: 6410/BS-4069 . Supply in 1kg/container. Make/Brand- Feroflux GYF101 or K Electronics

Fluorescent Penetrant as per RDSO specification M and C/NDT/105/2001. I Visibility: Type I- Fluorescent Dye. ii. Wash-ability: Method A-Water washable. iii. Sensitivity Level: Level 2-medium. iv. Deve

Visible dye penetrant Kit to RDSO Spec. No. M&C/NDT/105/2001, (Visibility : Type II) Consisting of three items :- (A) Red Visible Dye Penetrant, Visibility : type II and Washability : Method -C (Solve

Nickel - Chrome Test Panel to be used to detect (30 micron size) crack during visible dye & fluorescent penetrant system examination. RDSO specification no. RDSO/M&C/NDT/106(Rev-1). The detail technic

Visible dye penetrant Kit to RDSO Spec. No. M&C/NDT/105/2001, (Visibility : Type II) Consisting of three items :- (A) Red Visible Dye Penetrant, Visibility : type II and Washability : Method - C (Solv

" HYDRAULIC HOSE 3/4" SIZE TO SAE 100 R2 WITH BOTH ENDS FEMALE SWIVEL RIMPED FITTING SIZE 1 1/16" 12 TPI UNF/JIC 37 DEGREE,1.25 METERS LONG." MAKE:-DUNLOP/HOSEKING/MARKWELL/GATES/PIX/INDOMAKSSON/PARKE

FLEXIBLE HOSE ASSLY FOR CENTRIFUGAL FILTER INLET 7/8" ID X 70" OAL HOSE 100 R5R, END FITTINGS BOTH END FEMALE SWIVEL STRAIGHT SIZE 1.5 X 16" X 14" TPI WITH SPRING GUARD. HOSE MAKE - PARKER / MARKWELL.

Belt tensioning device assembly for 4.5 KW alternator as per RDSO's Drg. No. SKEL-3940 (Sheet-I) alt-5 and SKEL-3940 (Sheet-II) alt-5. ACCEPTED MAKE- SELF . TPI AT ADDRESS : - 20, J.N. GHOSH ROAD, K

Set of probes for Ultrasonic testing of axles to RDSO Specification No.M and C /NDT/116/2000 or latest. Each set consisting of as per the details attached at Annexure Make :- Modsonic Instruments Mfg.

PROCUREMENT OF A SET OF FLUORESCENT DYE PENETRANT FOR ZYGLO TESTING TO RDSO SPEC. NO. M&C/NDT/105/2001, CONSISTING OF WATER SOLUBLE FLUORESCENT DYE PENETRANT TYPE -1, METHOD - "A", SENSITIVITY LEVEL 3

Fluorescent magnetic powder (water based) for wet magnetic particle examination as per RDSO SPEC. NO. RDSO /M&C/NDT/109/2007 (Rev-2) issued on October-2020 or latest. Firm should supply the material

Procurement of 300 lts. Fluorescent Dye Penetrant, Type - I, Pre Emulsified, Water Washable, Method"A" for Fluorescent Dye Penetrant Test (Zyglo Test), as per RDSO Spec no M&C/NDT/105/2001, ability t

SINGLE CRYSTAL PROBE 2.5 MHZ FREQUENCIES AND 20MM DIA WITH BNC SOCKET ON TOP OF ALUMINIUM CASING FOR ULTRASONIC TESTING OF LOCO, CARRIAGE AND WAGONS. Matl.& Specn : RDSO SPECIFICATION NO. M&C/NDT/116/

PENETRANT-FLUORESCENT DYE TO RDSO SPECIFICATION NO. M&C/NDT/105/2001 effictive from April 2001, VISIBILITY TYPE-I TO PARA 2.1, WASHABILITY METHOD A - WATER WASHABLE TO PARA 2.2, SENSITIVITY LEVEL-4 TO

Set of items consisting of: 1) Pre Mixed Black Magnetic Particle as per, RDSO/M&C/NDT/109/2007,Rev2 (October 2020)(wet method) in oil media in 500 ml dispenser operating aerosol co

Fluorescent Dye Penetrant, Type - I, Pre-Emulsified, Water Washable, " for Fluorescent Dye Penetrant Test (Zyglo Test), as per RDSO Spec no M&C/NDT/105/2001, ability to detect crack 20-micron size or

Fluorescent Dye Penetrant, Type - I, Pre-Emulsified, Water Washable, " for Fluorescent Dye Penetrant Test (Zyglo Test), as per RDSO Spec no M&C/NDT/105/2001, ability to detect crack 20-micron size or

Quarterly testing and calibration throughout one year of 05 nos. of Road weighbridges under CV Area for compliance of SOP.