Inspection, Testing & Audit Tenders in West Bengal

DESIGN, ENGINEERING, SUPPLY, INSPECTION (TPI), INSTALLATION, TESTING AND COMMISSIONING OF ELECTRICAL HEAT TRACING SYSTEM AND THERMAL INSULATION FOR HOT VR LINE FROM VDU-I TO DCU AT IOCL HALDIA REFINERY.

HIGH SPEED STEEL HACKSAW BLADE SIZE: 525 MM X 40 MM X 2 MM (6 TPI) AS PER IS 2594: 2003 OR LATEST. MAKE: MIRANDA/ULTRA/MAGICUT/BIPICO OR SIMILAR

BOLT HEX HEAD 1/2 INCH - 20 TPI X 1-3/4 INCH AS PER DLW PT.NO.19014119 AND EMD PART NO.181433 Eb OR LATEST. offer: Make Brand TVS

HIGH TENSILE HEX HEAD BOLT OF SIZE 1/2" x 20 TPI UNF 2" LONG WITH SUITABLE NUT OF GRADE 5, MAKE TVS ,PFL, TUFF , UNBRAKO ONLY ACCEPTED MAKE: TVS

Supply of Graphite Grease Gr.III conforming to IS 508:2022 - Grease Graphite - Grade III, Make Similar to RAFTAR Graphite Grease Gr.III and Inspection by TPI FIRM's OFER:SAME AS ABOVE-MAKE:FIR

HIGH TENSILE BOLT OF HEXAGONAL HEAD OF SIZE 3/8" X16 TPI UNC - 4-1/2" LENGTH OF GRADE 8.8 OF MAKES TVS, UNBRAKO , TUFF MAKES ONLY accepted make: TVS

Supplying Installation and Demonstration of different instruments equipment to the Quality Control Laboratory Soil Testing Laboratory under Quality Control Division II Siliguri 2nd call

Tender for Empanelment of Pathology Laboratories for Sample Collection and Laboratory Testing Services for Both Campuses under Rate Contract Basis outsourcing basis

Custom Bid for Services - Contract for Deployment of diploma engineer and NDT expert for supervision during boiler overhauling of Unit#1, 5&3 or any Three units of MTPS Phase-I Similar Category Repair and Overhauling Service

NDT of 16 mm steel rope and vital components of both Man riding chairlift system 900 meter and 1342 meter of Nimcha R colliery under Satgram Sripur Area

Fluorescent Magnetic Powder for wet process (Oil Base) as per RDSO Spec. M&C/NDT/109/2007 (Rev-2) & IS:6410/BS-4069 Firm's Offer : Make/Brand - SIMS

Flourescent Dye penetrant water washable visibility Type-1 washability-Method "A" qty should be in 20 litrs drum This should conform to RDSO Specn.No.M & C/ NDT /105 / 2001.

Calibration Services - PARTICLE COUNTER (CM-20); PARTICLE COUNTER (CM-20); NABL Labs, Any other Government Approved Labs/Service Provider; Lab

Calibration Services - PARTICLE COUNTER (CM-20); PARTICLE COUNTER (CM-20); NABL Labs, Any other Government Approved Labs/Service Provider; Lab

Material Testing Lab 2nd and Final at GP office (Activity ID- 40073414), Sansad Name and No. Mugkalyan 02 Mouza- Mugkalyan, JL No. -89, Name of Fund PBG ( SFC.and IBRD)

Segregation of Lump of stone in Coal Heap No-4(B) and breaking of lumpy coal by engagement of JCB on Hire at Bhanora West Block(underground) Colliery coal depot for quality control measure and dispatching proper size coal to railway siding

Design, Engg, Supply, Inspection (TPI), Installation, Testing and Commissioning of Electrical Heat Tracing System and Thermal Insulation for Low Sulphur Heavy Stock (LSHS) Tank Wagon Direct unloading to Marketing Terminal-A

Stud for fitting of HMV as per size dia 8mm length 35 mm both side thread 18 tpi one side thread 10mm other side thread 15mm with galvanised material en-8.

Bolt Hex Head 5/16 Inch x 24 TPI x 1 Inch to EMD Pt. No.181339 Alt-Ea, and DLW Pt.No.19011052. Firms' offer: Same as above, Make/Brand: TVS

Mounting bolt for drive gear, Drilled hexagonal head 1/2 INCH X 20 TPI X 1 1/4 INCH length to EMD part no 8028329. And To DLW Part no 19014247.

Custom Bid for Services - Repairing and calibration of 01 no Online Particle counter by its OEM representative i e Ms J J Engineering Pvt Ltd on single tender basis Similar Category Repair and Overhauling Service Calibration Services

Custom Bid for Services - Contract for maintenance servicing and calibration of CHNS Analyzer Model vario MACRO Make Elementar Analysensysteme GmbH at Chemical Laboratory MTPS DVC for a period of Two years Similar Category Support Services ... Services Calibration Services

Group wise work for calibration of Mass Flow Meters and Ultrasonic flow meters installed in product pipelines i.e PHDPL and PMBPL/MAPL stations under ERPL

Group wise Calibration of Mass Flow Meters and Ultrasonic flow meters installed in product pipelines i.e PHDPL and PMBPL/ MAPL stations under ERPL (Total 22Nos)

Custom Bid for Services - STAMPING & VERIFICATION OF CHP & DAETP SILO WEIGH BRIDGE Similar Category Calibration Services

Calibration Services - Electrical; Mass and Volume; Any other Government Approved Labs/Service Provider; Buyer premises (onsite)

Inspection, Servicing And Calibration of Land Make Infrared Pyrometers, Cyclops Models at Inspection Department, Haldia Refinery

SERVICING, CALIBRATION AND REPLACEMENT OF DEFECTIVE PARTS OF 2 NOS. HARDNESS TESTERS OF EQUOTIP 2 MODEL

TESTING AND CALIBRATION OF EOT CRANE AT 507 ARMY BASE WORKSHOP, KANKINARA UNDER GE NORTH KOLKATA.

TESTING AND CALIBRATION OF EOT CRANES AT 507 ARMY BASE WORKSHOP KANKINARA UNDER GE NORTH KOLKATA.

Testing and Calibration of EOT Cranes at 507 Army Base Workshop Kankinara under GE North Kolkata

Calibration Services - Electrical; Electrical testing equipment; Any other Government Approved Labs/Service Provider; Buyer premises (onsite)

Calibration Services - Electrical; Electrical testing equipment; Any other Government Approved Labs/Service Provider; Buyer premises (onsite)

Custom Bid for Services - Repairing and Calibration of Flue Gas Analyser Make Testo Model Testo 350

TESTING AND CALIBRATION OF VCB - OCB AT 507 ARMY BASE WORKSHOP, KANKINARA UNDER GE NORTH KOLKATA.

TESTING AND CALIBRATION OF EOT CRANES AT 507 ARMY BASE WORKSHOP KANKINARA UNDER GE NORTH KOLKATA.

Custom Bid for Services - STAMPING VERIFICATION OF CHP DAETP SILO WEIGH BRIDGE Similar Category Calibration Services

Custom Bid for Services - Onsite Calibration of Electrical Testing and Measuring Equipments at IOCL Haldia Refinery

CALIBRATION OF TOOLS & INSTRUMENTS OF CPD RUNNING SHED FOR 03 YEARS (AS PER SCOPE OF WORK).

Custom Bid for Services - Service and Stamping of CI Weights & Beam Scales Similar Category Calibration Services

Custom Bid for Services - AMC FOR CMM AS PER SCOPE OF WORK Similar Category Calibration Services

Custom Bid for Services - Supply of 6 MT 20kg cast iron weight Similar Category Calibration Services

Conduction of NDT/Hydraulic pressure test of pressurized air receiver tank of HEMMs and auxiliary equipment and Non-Destructive Test of HEMMs and auxiliary equipment of CL Jambad OCP

Providing and fixing of steel structure and GI Profile Sheet for remaining work of car garage beside NDT Building and CAMM Shed at CSIR-CMERI Institute campus, Durgapur-9

Set of Items Consisting of: 1) Pre mixed black magnetic particle as per RDSO/M&C/NDT/109/2007 - Rev 2 (October 2020) (wet method) in oil media i

Rechargeable Battery (ATB-1) Spec.: 14.4 volts, 4 AH Li-ion Pack as per RDSO Specification No. - M&C/NDT/125/2004 for Modsonic Make- Einstein-IIR or Similar.

The verification of all parts and support for Calibration of 6 nos of Weigh Bridge situated in different locations within Purba Medinipur

Construction of office cum laboratory Building Complex for Export Inspection Agency Kolkata at New Town, Kolkata. SH: Supply, Hire and running charges of vehicle for official use of Assistant Engineer, BCSD-I, BCD-I, Salt Lake, Kolkata. Subwork/Packages: Hiring of vehicle for official use of AE, BCSD-I, CPWD, Salt Lake.

Calibration of Mass Flow Meter and Ultrasonic Flow meters under ERPL 3 Groups Group B Haldia Mourigram Rajbandh and Durgapur 6 nos of MFM

Renovation of Coding Room at Regional Quality Control Laboratory, Burdwan.