Inspection, Testing & Audit Tenders in West Bengal

Conduction of NDT/Hydraulic pressure test of pressurized air receiver tank of HEMMs and auxiliary equipment and Non-Destructive Test of HEMMs and auxiliary equipment of CL Jambad OCP

Providing and fixing of steel structure and GI Profile Sheet for remaining work of car garage beside NDT Building and CAMM Shed at CSIR-CMERI Institute campus, Durgapur-9

Set of Items Consisting of: 1) Pre mixed black magnetic particle as per RDSO/M&C/NDT/109/2007 - Rev 2 (October 2020) (wet method) in oil media i

Rechargeable Battery (ATB-1) Spec.: 14.4 volts, 4 AH Li-ion Pack as per RDSO Specification No. - M&C/NDT/125/2004 for Modsonic Make- Einstein-IIR or Similar.

The verification of all parts and support for Calibration of 6 nos of Weigh Bridge situated in different locations within Purba Medinipur

Calibration of Mass Flow Meter and Ultrasonic Flow meters under ERPL 3 Groups Group B Haldia Mourigram Rajbandh and Durgapur 6 nos of MFM

Average Turn Over of Last 3 Years 1000 Lakh (s) Experience with Gov. Required 5 Year (s) Cloth Gaberdine Disruptive Pattern/Dyed - Uniforms ( 510000 ) Technical Specifications * As per GeM Category Specification Specification Specification Name ... of Quality Assurance , ...

DEPUTATION OF EXPERT FOR CALIBRATION AND CHECKING OF PROBES SENSORS SHINKAWA MAKE INCLUDING CONTROLLERS INSTALLED AT UNIT 8, 500 MW KWU DESIGN, MEJIA TPS, DVC, WEST BENGAL.

Construction of Materials Testing Lab with Infrastructure at GP Office Building Including Supply, Installation and Commissioning complete of different Civil Engineering material testing machines and laboratory equipment at Sasanga Gram Panchayat

HEX HEAD CAP SCREW 5/8"-11 TPI x 6 " LONG ( P L NO: 15090334 ),DLW DRG NO: TPE-13-0044, ALT-U OR LATEST, SL NO: 65 Firm's offered make/brand: TVS

Bimetal (M-42) Band Saw blade with hook teeth pitch 4/6 TPI, Size 100'' X 1.06"X 0.035'' or (2540 x 27 x 0.90) mm Make- Lenox, Miranda, Evershine saw or equivalent.

Mounting bolt for drive gear, Drilled hexagonal head 1/2 INCH X 20 TPI X 1 1/4 INCH length to EMD part no 8028329. And to DLW Part no. 19014247. Accepted Make:TVS

Bimetal Band Saw Blades, Size:4100 mm x 34 mm x 1.10 mm x 4/6 TPI , Grade: M42. HSN Code: 82029110. Make & Brand: MTC / MEW / MORSE /LENOX. MAKE:MANDELIA, BRAND: MEW, GRADE: HSSM4.

Gauze Than 60cm.x 20mtrs.( 52 TPI both Horizontal & Vertical ), must should have, weight each than not less than 395gms. Piece of gauze should sink completely in water within 10 seconds or less [ Item

EG BASED, GREEN COLOURED, 40-60 ANTIFREEZE WATER SOLUTION TO IS:5759/2006. DM WATER SHALL BE USED FOR FORMULATION. NOTE- STAGE INSPECTION. Whenever PO is placed with TPI inspection condition, firm sha

'Blade Hacksaw - 24 TPI, Size: 300 mm nominal length x 12.5 mm width x 0.63 mm thickness, to Drawing / Specification IS:2594/2003(2nd Rev), Type - 'D', Material - HSS.' Accepted Make/ Brand : INDIEGEN

Gauze Than 60cm.x 20mtrs.( 52 TPI both Horizontal & Vertical ), must should have, weight each than not less than 395gms. Piece of gauze should sink completely in water within 10 seconds or less [ Item

Conducting structure stability audit of head gear structures and NDT of vital components of winding engines of Pit No-2 n Pit No-3 of J.K Pit of Siduli Colliery

Vertical Probe 2.5 MHz specn: Dia 20mm suitable for UFD Machine Model No. DS-322 Make Modsonic, ECIL, Technotronic. RDSO Spec. No. M&C/NDT/125/2004,Rev.II,January 2017.

DRY DEVELOPER POWDER FOR FLORESCENT PENETRANT (WATER WASHABLE) NDT INSPECTION, VISIBLE UNDER UV LIGHT Firms offer Our Offer: ORION 28D Dry Developer Powder conforming to RDSO Specification No. RDSO/M&

Construction of office cum laboratory Building complex for Export Inspection Agency-Kolkata at New Town, Kolkata SH Providing unskilled person to carry out day to day work of establishment and other section under O/o SE-Barasat. Subwork/Packages: Providing unskilled person to carry out day to day work of establishment and other section under Oo SE-Barasat.

Construction of Office cum Laboratory Building Complex for Export Inspection Agency - Kolkata at New Town, Kolkata SH Providing unskilled person to carry out day to day work of Establishment and other Section under Oo the SE-Barasat. Subwork/Packages: Providing Unskilled person to carry out day to day work of Establishment and other Section under SE-Barasat.

Electrification work of proposed Teesta Quality Control Lab at Tinbatti, Siliguri

Air Conditioning arrangement at Quality Control Section of CMS Building, Kolkata.

PROCUREMENT OF CALIBRATION GAS CYLINDERS FOR CAAOMS, CEMS AND OXYGEN ANALYZERS FOR UNIT 7 AND 8, DPPS

Repair and NABL calibration of Ultrasonic flowmeter UFM Make Adept Model 6720 at BHEL PSER KOLKATA Office

MISC. REPAIRING OF WEIGH BRIDGE AND CALIBRATION OF 60MT AND 40MT WEIGH BRIDGE OF DOCP, CV AREA.

BUFFER PROJECTION GAUGE,RANGE-570 TO 665 MM,ACCURACY - +1.0/-1.0 MM WITH CALIBRATION CERTIFICATE MAKE- Prasad.

Custom Bid for Services - ONE TIME SERVICE REPAIR AND CALIBRATION OF 5 SETS LIECA DGPS MODEL GS10

As per tender documents

Longitudinal Pressing for EMU/MEMU Tr. Coaches. KPA Drg. No. UF/E-229 Alt. No. "4" ACCEPTED MAKE - SEL . TPI AT ADDRESS : 1) 6 KALI MAJUMDER ROAD, HOWRAH -711107, 2) KATALIA INDUSTRIAL COMPLEX , NIB

MALE END FITTINGS FOR NO. 16 HOSE - FLEXIBLE PIPE OD: 1 & 1/4 Inch , 11 TPI, ID: 0.7 Inch AT MALE END SIDE. Sample to be approved before bulk supply. Offer: Make Brand: MEPL

BOLT Hex head 1/2 inch -20 TPI x 2-1/2 inch - Elbow to water pump as per DLW Pt.No.19014144 and EMD Pt.No.181440 Alt Nil or latest offer : Make Brand : OWN

High tensile heavy duty corrosion resistance ground thread rolled forged shaft EN-32 bright finish Dia. 30 mm X250 mm long X 8 TPI with nut . Make- Micro/ Super/MTC/JK Accepted Make: JK

Construction of office cum Laboratory Building Complex for Export Inspection Agency - Kolkata at New Town, Kolkata. SH Providing services of computer relate works and other misc. works for office of the Assistant Engineer, BCSD-I, BCD-I, CPWD, Kolkata-700064. Subwork/Packages: Providing services of computer related works for Oo the AE, BCSD-I.

Making concrete approaches, foundation, steel fabrication and fixing of profile sheet for 37 nos. of new car garage beside NDT building and CAMM shed at CSIR-CMERI Institute campus, Durgapur-09

CONSULTANCY SERVICES REGARDING HEALTH STUDY AND STRUCTURAL AUDIT OF ELEVATED SERVICE RESERVOIR AT G S BOSE ROAD IN WARD NO 67.

CONSULTANCY SERVICES REGARDING HEALTH STUDY AND STRUCTURAL AUDIT OF ELEVATED SERVICE RESERVOIR SITUATED BEHIND LAYELKA POND IN WARD 96, BR X.

Calibration Services - NITROGEN PURITY ANALYSED (PERCENTAGE); NITROGEN PURITY ANALYSED (PERCENTAGE); Any other Government Approved Labs Service Provider; Lab

Complete repairing/calibration of F.I.P and alternator repairing of Tipper BPW 972(Leyland) of Damagoria OCP, CV Area.

INSPECTION, SERVICING AND CALIBRATION OF LAND MAKE INFRARED PYROMETERS, MODEL CYCLOPS 390 B OF INSPECTION DEPARTMENT, HALDIA REFINERY

Repairing and Calibration of 05 Nos of Multigas Detectors Model Microclip XT make Honeywell of Jhanjra Project Colliery

Supply, Installation, Commissioning and Training of Gauge Block Comparator with Calibration certificate from NMI or NABL accredited LAB

BG10 I15 Test cartridge (Aspen) with Calibration Pack in the ration 100:1 Accepted Make/brand:-EDAN/i15

WHEEL PROFILE GAUGE AS PER DRAWING NO. SKDL-3592 ALT- 6 OR LATEST WITH CALIBRATION CERTIFICATE. MAKE-AOEG

Calibration Services - As per SoW; As per Scope of Work; NABL Labs; Hybrid (detailed in scope of work)

Custom Bid for Services - AMC OF ROVS AT LUBE OIL BLENDING PLANT BUDGE BUDGE Similar Category Calibration Services

Custom Bid for Services - Maintenance calibration stamping of weighbridges Similar Category Customized AMC/CMC for Pre-owned Products

Servicing maintenance and calibration of 33 KV VCB outdoor type upto 1250 Amp, Servicing maintenance and calibration of 11 KV VCB indoor type upto 800 Amp, Servicing maintenance of 500 KVA CSS and calibration of 11 KV VCB installed inside the CSS upto 800 Amp, S and F in repair Vaccum interrupter bottle for vaccum circuit breaker for upto 800 Amps in HT panel 11000 volts, S and F Shunt trip tripping closing coil assembly 30 Volts DC suitable for existing sample for HT VCB, Pneumatic Barrel Pump (Q3)

X-ray detectable 30x30 cm x 6 layer, 60 TPI BP threads per dm (10cm) std. High absorbent handloom of surgical swab with pool out tail and embedded with radio opaque, box of 10 pcs