Inspection, Testing & Audit Tenders in West Bengal

Custom Bid for Services - Contract for external calibration of Master Instruments Similar Category Customized AMC/CMC for Pre-owned Products

Calibration of D 6 Methanometer, Local Methane Detector, Multi Gas Detector and Anemometer of Shyamsundarpur Colliery under Bankola Area (retender)

WHEEL PROFILE GAUGE FOR B.G. LOCO WITH CALIBRATION CERTIFICATE, RDSO DRG. NO SK/DL/3592 ALT 06 MODEL TWG-1.

Custom Bid for Services - Biennial Contract for Maintenance Servicing and Calibration of water lab instruments of Chemical laboratory RTPS DVC

Custom Bid for Services - 9040C26A91 Calibration verification of custody transfer flow meters at Haldia Refinery site Similar Category Support Services

Calibration Services - As per Scope of Work; As per Scope of Work; NABL Labs; Hybrid (detailed in scope of work)

Custom Bid for Services - CALIBRATION OF LAB INSTRUMENTS FOR TWO YEARS Similar Category Operation and Maintenance Power House/Power Plant

Procurement of Quality Control Equipment and Field test Soil Concrete testing apparatus with two years on site Extended warranty for Teesta Quality Control unit at Teesta Administrative Building Tinbatti More PO Siliguri District Darjeeling

Mounting bolt for drive gear, Drilled hexagonal head 1/2 INCH X 20 TPI X 1 1/4 INCH length to EMD part no 8028329. Grade 8 of make TVS / LPS / UNBRAKO / POOJA only, with valid authorization certifica

Hydraulic Hose pipe Length 2 Feet with male end fitting size 3/8" , 18 TPI at one end & 1/4" , 18TPI at other end .Both end NPT mechanically crimped at both end. Working pressure 700 BAR, bursting pre

Rolled Bandage . 10 cm x 4 mtr, Made of non-elastic 100% cotton, To be good white, Number of threads per square inch should be between 50 to 60 TPI both Horizontal & Vertical ITEM CODE S510005 AI 22

Bolt Hex head 5/16 inch x 24 TPI x 1 inch long to EMD Part No.181339 and BLW Part No.19011052 for the maintenance of HHP Diesel Locomotives. Firm's offer : Same as above. Make/Brand : TVS

Calibration Services - PARTICLE COUNT MACHINE; PAMAS S 40 PARTICLE COUNT MACHINE; NABL Labs, National Testing House, Any other Government Approved Labs/Service Provider, Naval Science & Technological Laboratory(NSTL), DRDO Facilities, Research Desi..

Non- Destructive Test (NDT) of vital components of Steam Winding Engines with Cage Suspension Gears and Magnetic Defectograph test of winding ropes of all three pits (No. 4, 6 and 7) at Lower Kenda Colliery

"DYE CHECK SOLVENT CLEANER / REMOVER CLASS-2 NON HALOGENATED IN 380 ML MINIMUM AEROSOL CAN CAPACITY OR 500 ML MAXIMUM AEROSOL CAN CAPACITY TO RDSO SECN.NO. M and C / NDT / 105 / 2001. N.B.:THE MATERIA

Fluorescent magnetic powder (water based) for wet magnetic particle examination as per RDSO SPEC. NO. RDSO /M&C/NDT/109/2007 (Rev-2) issued on October-2020 or latest. Firm should supply the material a

Fluorescent dye penetrant kit for Zyglo testing to RDSO Spec. No. M&C/NDT/105/2001, Consisting of water soluble fluorescent dye Penetrant Type -1, method - "A", sensitivity level 3-20 Ltrs. And Dry d

White contrast spray can for MPT as per specification RDSO/M&C/NDT/109/2007 (Rev-2) October 2020 Accepted Offer: ORION WCP-61 White Contrast Paint for Magnetic Particle Inspection conforms to BS: 5044

"DYE CHECK SOLVENT CLEANER / REMOVER CLASS-2 NON HALOGENATED IN 380 ML MINIMUM AEROSOL CAN CAPACITY OR 500 ML MAXIMUM AEROSOL CAN CAPACITY TO RDSO SECN.NO. M and C / NDT / 105 / 2001. N.B.:THE MATERIA

Set of Magnetic particle spray for magnetic particle inspection confirming to RDSO specification No. M&C/NDT/109 [REV I]. Set consisting of : [1] Magnetic Black Ink (Oil Base) in 400 ml Aerosol Can Pa

Custom Bid for Services - TENDER DOCUMENT FOR MAINTENANCE & SERVICING OF FLOWMETER WITH CALIBRATION IN BLENDINGING OPERATIONS, BUDGE BUDGE Similar Category Customized AMC/CMC for Pre-owned Products

Custom Bid for Services - ANNUAL MAINTENANCE SERVICING AND CALIBRATION OF SPRING TESTING MACHINE AS PER LIST OF MACHINE AND WORK SCHEDULE

Custom Bid for Services - Calibration and maintenance of Tayaltech BA machine under APDJ division for a period of Three 03 years

Set of trammeling gauge for trammeling inspection of CASNUB 22 NL , NLB ,HS bogie with calibration certificate from NABL approved lab

Custom Bid for Services - AMC INCLUDING ANNUAL CALIBRATION OF 3 NOS MFM Similar Category Customized AMC/CMC for Pre-owned Products

SUPPLY OF EQUIPMENT FOR MATERIAL TESTING LAB

HEX HEAD BOLT 3/4 X 10 TPI X 1-3/4" INCH LONG WITH SUITABLE SPRING WASHER OF GRADE 8. MATERIAL SPECIFICATION TO MATCH WITH GM 300-M-STEEL Make: PRECISION FASTENERS LTD (UNK) /TVS FOR BOLT only

High speed steel hand hacksaw blade,type-A to size 300mm x 12.5mm x 0.63mm x pitch-1.4mm x 18 TPI (teeth per inch) as per IS: 2594-2003 conforming to material designation as per clause 6.1 o.... High

1)BOLT HEXAGONAL HEAD 1/2 INCH X 1 1/4 INCH LONG, 13 TPI, FULL THREAD FOR MG TRACTION MOTOR CONNECTION, MATERIAL - STEEL CLASS- 4 ZINC PLATED OR PHOSPHORATED TO IS: 1875 QTY: - 48 NOS, ALONG WITH 2)

Double Stage Regulator with flow meter, Type of Gas CO2, Max. Inlet Pressure (BAR) - 200, Flow : LIT/MIN 35 Ft. 3/h: 74, Inlet Connection : 0.860 x 14 TPI R/H (Female) Outlet Connection : 3/8" R/H (Ma

Custom Bid for Services - Annual & routine maintenance and calibration Servo-hydraulic Universal Testing Machine, Model UTM-1000, Automatic Extensometer and Clip-on Extensometer Similar Category Customized AMC/CMC for Pre-owned Products

P.V. Expansion (Angle) moulding Size - 75x52x3x2000 mm long to N.E. Rly. Drg. No. SK-1457/C, Alt. 2, Fig. 2, item - 3, colour - As per Drg. Note - Material testing should be as per RDSO Specn. No. RDS

ELECTROLYTE REAGENTS FOR HDC LYTE, DAILY CLEANER FOR HDC LYTE, QUALITY CONTROL FOR HDC LYTE

INSPECTION OF ALL TG BEARINGS (1 TO 7), NDT OF BRG.-1 and 2, SET RIGHT OF TURBINE INSULATION AND INSPECTION, RECTIFICATION OF GENERATOR SEAL SYSTEM OF UNIT-5 TG SET (215 MW), BTPS, WBPDCL, BANDEL.

Custom Bid for Services - Notice Inviting Tender Selection of Agency conducting NonDestructive Test NDT by USPV Rebound Hammer method and Ground Penetration Reinforcement GPR Test for assessment of quantity of reinforcement on Bindu Barrage under Jal..

Set of items consisting of : 1)Pre mixed black magnetic particle as per RDSO /M & C/NDT/109/2007-Rev2 ( October 2020)( wet method) in oil media in 500 ml dispenser operating aerosol container ( net co

DRY DEVELOPER POWDER CONFORMING to RDSO Specn. No. M&C/NDT/105/2001 effictive from April 2001. Shelf life 24 months from the date of manufacturing.Warranty Period: Up to 24 months from the date of del

"MPT consisting of Pre-mixed black magnetic particle as per RDSO/M&C/NDT/109(Rev-1) type-1-2007 (wet method) in oil media in 500ml dispenser operating aerosol container (net content 400ml/280gm) along

Set of items consisting of: 1) Pre Mixed Black Magnetic Particle as per, RDSO/M&C/NDT/109/2007,Rev2 (October 2020)(wet method) in oil media in 500 ml dispenser operating aerosol container (net content

Normal Single Crystal Probe, 2.5 MHz, Size-20 mm dia, along with OEM certificate, compatible to USFD machine (RDSO Specn. no. M&C/NDT/125/2004 Rev. -II, 2017) Modsonic- Einstein II(R) & ARYA-1 (R)

Black Magnetic particle ink in aerosol can as per IS: 6401 & BS-4096 or latest.Packing: 400ml net content/500 ml can volume. Specification: RDSO M&C/NDT/109 (REV-2) October 2020. Make: Spray Check/ORI

SINGLE CRYSTAL PROBE 2.5 MHZ FREQUENCIES AND 20MM DIA WITH BNC SOCKET ON TOP OF ALUMINIUM CASING FOR ULTRASONIC TESTING OF LOCO, CARRIAGE AND WAGONS. RDSO SPECIFICATION NO. M&C/NDT/116/2000.REV-2. FIR

SINGLE CRYSTAL PROBE 2.5 MHZ FREQUENCIES AND 20MM DIA WITH BNC SOCKET ON TOP OF ALUMINIUM CASING FOR ULTRASONIC TESTING OF LOCO, CARRIAGE AND WAGONS. RDSO SPECIFICATION NO. M&C/NDT/116/2000.REV-2. Fi

SINGLE CRYSTAL PROBE 2.5 MHZ FREQUENCIES AND 20MM DIA WITH BNC SOCKET ON TOP OF ALUMINIUM CASING FOR ULTRASONIC TESTING OF LOCO, CARRIAGE AND WAGONS. RDSO SPECIFICATION NO. M&C/NDT/116/2000.REV-2. Fir

Nickel Chromium Test Panel 30 Micron as per specification RDSO/M&C/NDT/106/2007, (Rev-2), October 2020 Accepted offer: NICKEL CHROME TEST PANEL AS PER EN ISO 3452-3 FOR DETERMINATION OF SENSITIVITY LE

High speed steel hand hacksaw blade,type-A to size 300mm x 12.5mm x 0.63mm x pitch-1.4mm x 18 TPI (teeth per inch) as per IS: 2594-2003 conforming to material designation as per clause 6.1 of IS: 7291

Bolt Hex Head 1/2 x 20 TPI x 4 long to DLW Part No 19014156 & DLW Drg No 181446. MAKE TVS/LPS/BIMCO/DFL/ EMD/UNBRAKO ONLY. Proof of supply of OEM (make mentioned above)/OEM(make mentioned above) aut

stud for fitting of ics as per size dia 8mm length 45 mm both side thread.22 tpi one side thread 15mm other thread 10mm with galvanised material en-8.as per Drg. no.WR/E/SK/BRK-1110. MAKE/BRAND- RIJ

BIMETALLIC MACHINE HACKSAW BLADE TO IS:2594/18 HAVING FLEXIBLE SPRING, STEEL BACKING M 42 HSS CUTTING EDGE OF SIZE 525 X 45 X 2.25(4 OR 6 TPI) OVER ALL LENGTH 560 MM ORDERING CODE 3809-525-45-2.25 OF

SET OF DRILL MACHINE CHUCK WITH KEY'S AS PER SCHEDULE BELOW : TYPE OF MATERIAL: STEEL. ITEM(1) DRILL CHUCK SIZE 1/2" X 20 TPI CAPACITY 10 mm DIA, MAKE SHARP/GRIPP/JUG, QTY.- 1 KIT. ITEM NO.(2) DRIL