Truck, Tipper & Tanker Tenders in Jharkhand

REPAIRING OF GEARBOX, OPEN GEAR WHEEL AND SPUR PINION INTERMEDIATE SHAFT WITH GEAR AND INPUT SHAFT EITH GEAR OF 30 Te. CAPACITY OF EOT CRANE OF 100 Te. DUMPER SECTION AT MAIN WORKSHOP OF RAJMAHAL OCP

Repair, Maintenance, and Installation of Plant Systems/Equipments (Version 2) - COAL MINES; REPAIRING OVERHAULING OF 01 ONE NO FAILED ENGINE ASSEMBLY SL NO DLT00893 APPLICABLE TO CAT 777E MODEL 100TE DUMPER OF RAJMAHAL PROJECT; Service Provider

Repair, Maintenance, and Installation of Plant Systems/Equipments (Version 2) - COAL MINES; REPAIRING OVERHAULING OF 01 ONE NO FAILED TRANSMISSION ASSEMBLY SL NO JJS01057 APPLICABLE TO CAT 777E MODEL 100TE DUMPER OF RAJMAHAL PROJECT; Service Provide..

Repair, Maintenance, and Installation of Plant Systems/Equipments (Version 2) - COAL MINES; REPAIRING OVERHAULING OF 01 ONE NO FAILED TRANSMISSION ASSEMBLY SL NO JJS01055 APPLICABLE TO CAT 777E MODEL 100TE DUMPER OF RAJMAHAL PROJECT; Service Provide..

Facility Management Services - LumpSum Based - Industrial; Loading of different Raw Materials, into Company dumper and unloading the same at the specified areas as per the instruction of RM department and as required by production department; Consu..

Repair, Maintenance, and Installation of Plant Systems/Equipments (Version 2) - coal mines; REPAIRING OVERHAULING OF 01 ONE NO FAILED TRANSMISSION ASSEMBLY SL NO JJS01084 APPLICABLE TO CAT 777E MODEL 100TE DUMPER OF RAJMAHAL PROJECT; Service Provide..

Please Refer ANNEXURE B in Tender Document

a. Repairing and rewinding of self startor 24 volt 02 Nos b. Repairing and rewinding of Alternator 24 volt 02 Nos

Please Refer ANNEXURE B in Tender Document

Repairing of 02 nos failed alternator of lucus type 12V of service Van, Registration No.JH10V1984 and TATA Truck Registration No.JH10D9781 of Kuya OCP, Bastacolla Area IX.

Hiring of Earth Moving Equipments, Material Handling Equipments and Cranes (per Hour basis) - As Per Buyer's Requirement; Truck Mounted Mechanical Road Sweeper as per specification of

Repair, Maintenance, and Installation of Plant Systems/Equipments (Version 2) - Coal Mines; Continuation of Truck Dispatch System and control Room, ROCP for Production Monitoring; Service Provider

Tractor, Hydraulic Trailer, MB Plough, Cultivator, Cage Wheel, Seed Drill, Rotavator, Bed Raiser, Hand Power Tiller, Multicrop Threasher, Winnower, Self propelled Reaper, Power Sprayer, Chaff Cutter, Gator with Pipe, Foldable Pipe, Electric Motor, Diesel Pump

Dismantling and relaying of 6 inch dia pipeline and 1000 GPM pump motor set with installation of 2000 GPM pump motor and fabrication of tanker post at 4 no. mine under AADOCM, Dhori area

Repair, Maintenance, and Installation of Plant Systems/Equipments (Version 2) - COAL MINES; Repairing of body for fire tender No JH17G0265 water Tanker No 17B6851 JH17B6855 and maintenance of explosive Van No JH17F9675; Service Provider

Repairing of gear box, open gear wheel and gear pinion intermediate shaft with gear and input shaft with gear of 30 Te Capacity of EOT Crane of 170 Te Dumper Section at Main workshop of Rajmahal OCP

Rep.of misl.dam. str.(like platform,radiator cover top portion,tierod assy.,railing,trans.and belly guard,canopy,cabin mounting,gate opt.seat,battery box,filterhousing, A/Chousing,front show, side mirror etc.) of 60T Dumper 3767, 60168,3721 at DBOCP

For fitting new Rear View Camera with LCD Monitor with USB and LED Light Supply and fitting of Dumper Sl.No. JH 10 AD, 7082, 7083,7084, 7085, 7836, 7837, JH 10 AF-2990,2991,2992,2993 of SAW, under Sijua Area.

a. Armature rewinding with commutator of self startor 12V. b. Field coil new changing of self startor 12V. c. Carbon brush with brush gear assly 12V self startor. d. Solenoid switch new changing of self startor 12V. e. Pinion changing. f.

Truck Mounted Boom Lift Platform (Q2) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Document required from seller Experience Criteria, Bidder Turnover, Certificate (Requested in ATC) *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? No Minimum number of bids required to disable automatic bid extension 1, -- Number of days for which Bid would be auto -- extended 7 Bid Number : GEM/2025/B/6700592 Dated : 18-09-2025 Bid Document 1/5 Number of Auto Extension count 1 Bid to RA enabled No Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Payment Timelines Payments shall be made to the Seller within 30 days of issue of consignee receipt-cum-acceptance certificate (CRAC) and on-line submission of bills (This is in supersession of 10 days time as provided in clause 12 of GeM GTC) Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Advisory Bank State Bank of India EMD Amount 50000 ePBG Detail Required No (a). EMD EXEMPTION: The bidder seeking EMD exemption, must submit the valid supporting document for the relevant category as per GeM GTC with the bid. Under MSE category, only manufacturers for goods and Service Providers for Services are eligible for exemption from EMD. Traders are excluded from the purview of this Policy. (b)., EMD & Performance securityshould be in favour of Beneficiary, wherever it is applicable. Beneficiary : Executive Officer Madhupur Nagar Parishad, Urban Development and Housing Department Jharkhand, N/A, (Executive Officer Nagar Parishad Madhupur) 2/5 Splitting

Repairing changing door, glass, machine, lock and bumper denting etc. JH 10AD-7082,7084,7083,7836 and JH 10 AF-2991,2992,2993(ii) for damaged and leakage Tipping hydro lick Cylinder repairing, machining polishing and o ring changing of coal tipper

Please Refer ANNEXURE B in Tender Document

Repairing of 02 nos failed self-starter of lucus type 12V of service Van, Registration No.JH10V1984 and TATA Truck Registration No.JH10D9781 of Kuya OCP, Bastacolla Area IX.

Custom Bid for Services - Design, Supply, Installation and Commissioning of Wheel washing (Truck Tyre) System for KDCMP Similar Category Repair, Maintenance and Installation of Plant Systems/Equipments

a. Complete startor rewinding 24V Alternator b. Rotor rewinding 24V alternator c. Alternator kit changing 3 sets d. Alternator rectifier changing 3 sets e. Regulator changing 24V f. Bearing changing as per sample 3 sets

Hiring of Earth Moving Equipments, Material Handling Equipments and Cranes (per Hour basis) - Material Handling Equipment; 4 HYDRA 2 TRACTORS TRAILER 1 JCB OTHER MATERIALS HANDLING EQUIPMENT REQUIRED AS PER SITE CONDITION; up-to 5 years

Repair, Maintenance, and Installation of Plant Systems/Equipments (Version 2) - COAL MINES; REPAIRING OVERHAULING OF 01 ONE NO FAILED ENGINE ASSEMBLY SL NO DLT00860 APPLICABLE TO CAT 777E MODEL 100TE DUMPER NO PT96 OF RAJMAHAL PROJECT; Service Provi..

1. Glass frame denting, shaping as per required size and shape including labour cost. 2. Removal of damaged glass and fitment of new glass to the frame. 3. Sealant PU solution for pasting of glass

1. Repairing and rewinding of self-starter Lucas type 12V 04 nos. 2. Repairing and rewinding of alternator Lucas type 12V 04 nos.

Goods Transportation service - Monthly Based Service - Outside city within state; Construction Material, Machinery & Equipment; Open Body LCV Truck, Goods Transportation service - Monthly Based Service - Outside state; Construction Material

Please Refer ANNEXURE B in Tender Document

Please Refer ANNEXURE B in Tender Document

Please Refer ANNEXURE B in Tender Document

Please Refer ANNEXURE B in Tender Document

A. Repairing and Rewinding 24V 50 MT Delco Remy 6 Pole Self Starter 03 Nos 1. Complete starter rewinding 24V alternator B. Repairing and Re winding 24V Alternator Delco remy 160 Amps 03 Nos

Repairing and Rewinding 24V 50 MT Delco Remy 6 Pole Self startor 03 nos Repairing and Rewinding 24V Alternator 160 Amps. Delco remy 03 nos.

1. Dismantling of water pump assly. and hydraulic pump assly. cleaning. 2. Water pump impeller housing, welding, machining, polishing etc. 3. Hydraulic pump assly. body, welding, machining and facing etc.

Please Refer ANNEXURE B in Tender Document

1. Repairing and rewinding 24V 50 MT Delco remy 6 pole self startor 03 nos. 2. Repairing and rewinding 24V alternator 140 amps presto lite 03 nos. a. Complete startor rewinding 24V Alternator b. Rotor rewinding 24V alternator c. Alternator kit

Repair, Maintenance, and Installation of Plant Systems/Equipments (Version 2) - Coal Mines; Repairing Replacement of damaged telephone cable from Radishop to 85 Ton Section and 85 T Section to DDU and Dumper gate and Mine dispatch to Dozer Section;..

1.Armature rewinding self starter 2.Field Coil repairing Taping self starter 3.Solenoid switch self starter 4.Pinion changing 10 teeth 5.Housing dalla self starter 6.Pole screw replaces 7.Magnetite pole replaces 8.Rewinding of Alternator

1.Glass fitting work of glass fitting core with core with rubber and lock etc of Dumper SL No D10359 D60042 and D60055 2.Complete operator cabin glass new changing with rubber Lock and gate denting of Dozer T12098 and T12099.

1. Repairing of front drive line with changing of cross bolt andbolts pulling out and damaged thread. 2. Battery box repairing work. 3. Repairing of upright support LHS and RHS bend gate work Dumper Sl No D 10365 and D 10366.

Repair, Maintenance, and Installation of Plant Systems/Equipments (Version 2) - COAL MINES; Repairing gearbox open gear wheel spur pinion intermediate shaft with gear and input shaft with gear of 30 te Capacity EOT Crane of 170 Te Dumper Section at..

Please Refer ANNEXURE B in Tender Document

1. Old rusted mud guard cutting by gas cutter. 2. New MS sheet cutting and making as per mud guard size. 3. New mud guard welding. 4. Angle welding in mud guard core. Operator safety glasses fitting 1. Front safety glass fitting size

Safety Glasses with new rubber bit and rubber lock

Please Refer ANNEXURE B in Tender Document

Please Refer ANNEXURE B in Tender Document

Please Refer ANNEXURE B in Tender Document