Loading
Loading…
Loading…
4,874 results • Best match
CONTROL VALVE SPARES
Control Valve Mascot
COMPLETE CONTROL VALVE
COMPLETE CONTROL VALVE PART A, COMPLETE CONTROL VALVE PART B, COMPLETE CONTROL VALVE PART C
Prov. and Fixing of C.I. Sluice valve and NRV 100 mm various tubewell in area of West Constituency,Zone No.5
Procurement of Main Feed Line Control valves.
Gate valve, 600#, Gear operated
Sluice Valve For Water Works Purposes (50 To 1200 Mm Size) (V2) As Per Is 14846 (Q3), Non Return Valve (Q3) MSE Exemption for Years of Experience and Turnover
Rough Cost estimate for providing and fixing fire hydrants on water supply line and providing and fixing Sluice valve NRV, construction of Sluice valve chambers and other works contingent thereto in ind. Area phase-9 MC S.A.S Nagar.
cast carbon steel ball valve
OBM Check valve inlet, OBM Check valve outlet, OBM Tapper roller bearing, OBM Impeller, OBM Fuel Pump Assy BOQ Title BOQ TSS
2’ ’ Mud gate valve (Q3), 4’ ’ Mud gate valve (Q3)
CS Gate Valve 6 Inch, CS Gate Valve 4 Inch
Repair of C.I. Sluice valve and NRV with pipe flunge on pipe various tubewell in area of West Constituency,Zone No.8
SPARES FOR M/s EMERSON MAKE CONTROL VALVES: CAGE, LINEAR, COATED PART CODE: 34B2373X072 REQUIRED FOR C, CAGE, LINEAR PART CODE: 37B2839X522 REQUIRED FOR CONTROL VALVE: TAG: LV-9804 SR. NO. : IA150999, CAGE, WHISPER III, B3 PART CODE: 31B7001X012 ... FOR CONTROL VALVE : ... FOR CONTROL VALVE : ...
High pressure Lift Type Check Valve
complete control valve (Q3)
CONTROL VALVE WITHOUT ACTUATOR
SUPPLY, INSTALLATION AND COMMISSIONING OF FLASH BACK ARRESTOR (DRY TYPE) TORCH END FOR FUEL GAS (ACETYLENE/LPG) CONFORMING TO ISO 5175-1:2017 STANDARDS WITH FLAME ARRESTOR(FA) AND NON RETURN VALVE(NRV
Stainless Steel Gate Valve
Forged Carbon Steel Gate Valve 20MM, Forged Carbon Steel Gate Valve 15MM, Forged Carbon Steel Gate Valve 25MM
Procurement of RH Spray Control valves and Spares
REPAIR/MAINTENANCE OF WATER SUPPLY LINES (CI/GI/DI), RAISING MAINS, DELIVERY LINES, SLUICE VALVE, NON RETURN VALVE, CLEANING OF OVERHEAD TANK, UNDER GROUND SUMP AND CONNECTED WORKS IN D-III AND D-IV ZONE UNDER AGE E/M -II OF GE (N) MAMUN
EXHAUST AIR VALVE
Unbranded NA mm dia Ball valve
CONTROL VALVE FOR FILLING STATION
Spares for XV9401 control valve
L&T make Butterfly Valve with Pneumatic Actuator, Size- 100 mm, Size- 80 mm
Sluice valve size 600mm for cooling water service
Non-rising Spindle Gate Valve
Forged Carbon Steel Gate Valve
100MM Cast iron non return valve, 100mm Rubber Flange, MS Full Threaded bolt nut 19 no, Rubber Gasket Sheet 1- 8inch, Staniless Steel submersible pump jali, Submersible support wire 8 mm, Chlorine fo Water Purification 5 ltr.packing, 15 HP Submersible Motor pump 3 phase 12 Stage Delivery size 75mm, M.S Pipe 65mm, M.Seal, Nitrile Rubber Sheet
Gate valve, 300#, Gear operated along with bypass provision (1" )
jacketed gate valve for molten Sulphur s, jacketed gate valve for molten Sulphur 80NB, jacketed gate valve for molten Sulphur 50NB, Jacketed globe valve
CONTROL VALVE KRONOR 2224, CONTROL VALVE, ADAPTER STOPPER CABLE, DUMPER SEAT SHOCKER, AIR DILUTION BAG, CONDENSATE SUMP, DIAPHRAGM BRK CHAMBER
FORGED GATE VALVE 1/2 INCH (Q3), FORGED GATE VALVE 3/4 INCH (Q3)
PRESSURE CONTROL VALVE, QUICK RELEASE VALVE, VALVE BRAKE PNEUMATIC, FAN BELT, IGNITION SWITCH, BUSH, POLE SCREW, TERMINAL
HYDRANT CONTROL VALVE 50 MM (BALL VALVE TYPE) WITH DETACHABLE HANDLE AS PER SPECIFICATION : (1) BODY, BONNET & BALL-(FORGED BRASS MATERIAL) IS-6912 Gr. FLB. (2) BODY SEAT RING, THRUST WASHER & GLAND
HYDRANT CONTROL VALVE 50 MM (BALL VALVE TYPE) WITH DETACHABLE HANDLE AS PER SPECIFICATION : (1) BODY, BONNET & BALL-(FORGED BRASS MATERIAL) IS-6912 Gr. FLB. (2) BODY SEAT RING, THRUST WASHER & GLAND
HYDRANT CONTROL VALVE 50 MM (BALL VALVE TYPE) WITH DETACHABLE HANDLE AS PER SPECIFICATION : (1) BODY, BONNET & BALL-(FORGED BRASS MATERIAL) IS-6912 Gr. FLB. (2) BODY SEAT RING, THRUST WASHER & GLAND
Relay Control Valve, Clamp Hose, Hose Assy Non Metallic, Relay Emergency Valve, Bearing Tapper Roller