Valves Tenders in West Bengal

Supplying, fitting fixing of 800 mm dia Cast Iron gear operated sluice valve at High lift of Dihika Pump House under Asansol Municipal Corporation

Reparing of pipe line constraction of sluice valve chamber of near LIC,Gopalpur pump house,Fothapur,Kumarpur under RCFA Division Part-I PHE Dte.

Withdrawing and relaying of pipe, construction of sluice valve chamber AND river crossing with DI pipe at Rahimabad WSS under alipurduar Division, PHE Dte.

UPVC pipe, sluice valve ,Street stand post and other allied works at Harabhanga and Tirat Colliery adjoining area under RCFA Division -I PHE Dte.

Overhauling kit for soft seated check valve consisting of 02 items.(i) Valve seat (ii) Spring as per drawing no ER/KPA/EL/AR.3G2.593C. Accepted Make/Brand: OWN MAKE

Supply, delivery and fitting fixing of Non Return Valve on pump delivery line of WTP Dejuri ,Block- Borjora under Bankura-I and II and Borjora Block Surface water based Piped Water Supply Scheme (BRGF Phase-I) under BMD, PHED. , Dist- Bankura.

Supply of C.I Non return valve flanged end and swing type side bypass arrangement conforming to IS15312 under Ghatal (A-M) Sub-Division within Midnapur (A-M) Division in the district of Paschim Medinipur under Non-Plan Programme 2025-26.

Set of Teflon Washers to provide in Non Return valve, Set consists of 03 items as follows: 1) Teflon Washer OD 30mm x ID 6.5mm x thickness 4mm - 1000 Nos./Set 2) Teflon Washer OD 38mm x ID 9mm x thic

Kits of Spares for 1-1/4 Inch NON-RETURN VALVE used in EMU service to KPAS Drg. No. ER/KPA/EL/AR. 3G4.2009 B comprising 03 items.: - (i) Gasket-01. No. Set. (ii) Aluminiyum washer-01 no/set/ (iii) Spr

Kits of Spares for 1-1/4 Inch NON-RETURN VALVE used in EMU service to KPA Drg. No. ER/KPA/EL/AR. 3G4.2009 B comprising 03 items.: - (i) Gasket-01. No. Set. (ii) Aluminiyum washer-01 no/set/ (iii)Sprin

1 1/4 inch Non Return valve Type 86 R as per Drg No. Sr.DEE/RS/ED/PNEU-61 Note: This item is reserved for supply by Approved source in IREPS Vendor Directory only. (As per CLW Item ID: 2100831 , N

Kit of spares for 1-1/4 inch NON -RETURN VALVE used in EMU service to KPA's Drg. No ER/KPA/EL/AR. 3G4.2009 B comprising 03 items : - (i)Gasket-01 No/Set. (ii) Aluminium washer -01No/Set. (iii) Spring

Pair of Flash Back Arrestors (Torch Mounted).Equipped with Gas Non return Valve, Flame Arrestor and Thermal Cut off. Item (1) For Oxygen Gas, Thread G 3/8 RH. Item (2) For LPG Gas Thread G 3/8 LH. Fir

DAY TO DAY MAINT OF B/R NATURE, DAY TO DAY MAINT RELATED TO ELECTRICAL COMPLAINTS IN TECH AREA AND REPAIR / MAINT OF VALVE CHAMBER, CONTROL VALVES INCLUDING REPLACEMENT OF SIGN BOARDS AND MAINTENANCE OF WATER SUPPLY INSTALLATIONS AND OTHER CONNECTE

O/H Kit for 3/4" Duplex check valve to CEE`s Drg. No. LOCO/3/GK/114 for WAM4 WAG5 & WAG7 locos.

RUBBER KITS PACKED IN POLYTHENE COVER FOR DUPLEX CHECK VALVE TO WSF PART NOS AS PER ANNEX. (EACH KIT CONSIST OF 3 ITEMS)

1/2(half) INCH SOFT SEATED CHECK VALVE USED IN LOCOS. as per Drg.No. AS PER KPA DRG NO AR. 3G2. 593 C.

1/2" Soft seated check valve to WSF's Pt. No. A83288/4 Pamp. No. AI-221 or similar for WAP4 AND WAG7 LOCOS.

RUBBER PART KIT FOR DUPLEX CHECK VALVE TO RDSO DRG.NO. SKDP-1187, REF.8,11,12 and 21 Alt-2 :-QUANTITY EACH ONE Make:- RECON

1 inch (One Inch) Check Valve for Locomotives to Specn./ Drg. No. as per CLW Drg. No. 0/2/65/102 Alt.2

O/H Kit for 3/4" Duplex check valve to CEE`s Drg. No. LOCO/3/GK/114 for WAM4 WAG5 & WAG7 locos.

DUPLEX CHECK VALVE - 3/4" as per Drg.No. 11376533 ALT b Refer as per Drg.no. K 1051/ Spec. no. CK 407 (Rev 04).

3/4" Duplex check valve set at 5 kg to WSF's Pt. No.IC70024/1 (Pamp.No.AI-205) OR SIMILAR. Firm's offer Make/Brand- SKEE

DUPLEX CHECK VALVE 3/4 " TO CLW DRG. NO. 0/3/65/103 ALT.2. Firms offer: Same as above. Make / Brand : SKEE

Duplex Check Valve for air spring suspension bogies Drawing No: - RDSO/SK-K1051 Alt.1, Specification:- C-K407 (Rev.-4) of March 2023

Ball valve for sanitary facility 25 mm to RCF drg. no. LW63106 Alt-a, item no. 5.Matl.&Spec. As per drg.

Ball valve for sanitary facility 15 mm to RCF drg. no. LW63106 Alt-a, item no. 3.Matl.&Spec. As per drg.

BALL VALVE 15 MM FOR SANITARY FACILITY (LENGTH 75MM & NOM. DIA 15MM), TO RCF DRG NO.LW 63106 alt-a, ITEM NO.3.

Ball valve for sanitary facility 25 mm to RCF drg. no. LW63106 Alt-a, item no. 5.Matl.&Spec. As per drg.

Ball valve for sanitary facility 25 mm to RCF Drg. no. LW63106 Alt-a, item no. 5. Matl.&Spec. As per Drg.

Ball valve for sanitary facility 15 mm to RCF drg. no. LW63106 Alt-a,item no. 3.Matl.&Spec. As per drg.

BALL VALVE 15 MM FOR SANITARY FACILITY (LENGTH 75MM & NOM. DIA 15MM), TO RCF DRG NO.LW 63106 alt-a, ITEM NO.3.

Ball valve for sanitary facility 25 mm to RCF drg. no. LW63106 Alt-a, item no. 5.Matl.&Spec. As per drg.

Ball Valve 20 MM for Sanitary Facility (Length 80 MM & Nom. Dia 20 MM) to RCF DRG No.LW 63106, Item No.4.

Ball valve G 3/4" as per CLW Spec. No.CLW/ES/3/0117 Alt-B or latest. -Accepted Firms Make/Brand-SKEE.

Ball valve 3/4" for WAG-9 loco as per CLW Spec. No. CLW/ES/3/0117 (Alt. B). ACCEPTED ;MAKE: RECON

SOLENOID VALVE ENCLOSURE BOX(SVEB) OF VARIANT-1(8- VALVES), SOLENOID VALVE ENCLOSURE BOX (SVEB) OF VARIANT-2(11-VALVES)

Supply of Sluice valve ISI marked 150 mm P.N 1.6 with hand wheel for water works purpose, C.I flanged type conforming to IS 14846/2000 with latest amendments. Valves shall be tested for (closed end test) hydrostatic test requirement under NP24-25.

REPAIR/REPLACEMENT OF EXTERNAL WATER SUPPLY ITEMS, WATER TANKS, CONTROL VALVES AND CONNECTED WORKS AT PEDONG, AP ALGARAH, DALAPCHAND AND TEESTA TCP UNDER GE 867 EWS

Control valve two throw for ACE make fork lift Model- AF 30 D, to ACE part no. COK010020100 or latest.

Service kit Control Valve assly ICF Type Elgi part no -EU 6545113, consisting of 9 items as per Annexure attached

SUN MAKE HYDRAULIC VALVE SET FOR WHEEL SET CUSHIONING CYLINDERS IN SMTC MOUNTING PRESS: SUN MAKE RELIEF VALVE TO MODEL NO:RDDA - LDN SUN MAKE CHECK VALVE TO MODEL NO: CXCD-XAN & SUN MAKE BODY TO MOD

EP Magnet Valve Assly consisting of holding and application magnet valve complete, check valve and adopter bracket for WSF type brake equipment of EMUs/MEMU/DEMU. Spec/Drg No- M/s WSF Part No ID-7023

Materails only for 25 mm bore gate valve gun metal class II screwed both ends, Materails only for 20 mm bore gate valve gun metal class II screwed both ends, Materails only for 25 mm diaBall valves high pressure of PTMT with epoxy coated Aluminium ... diaBall valves high ...

C2W Relay Air valve Rubber part kit consists of 9 items as per annexure attached. ACCEPTED MAKE: AK

Rubber Kit for R6 relay air Valve As per Annexure Specification: - KPA drg.no.-ER/KPA/EL/GK.3G5.1988B

C-2 W RELAY AIR VALVE RUBBER KIT OF 09 ITEMS TO SIL PT.NO. 30396201 & FTIL PT.NO.790505101.

Set of ball valves Ball Valve for sanitary Facility A) Length 80mm & Nom. dia 20mm RCF Drg. No.LW 63106, Alt-nil, Item No.4 and B) Length 90mm & Nom. dia 25mm RCF Drg. No.LW 63106, Alt-nil, Item No.5

Unbranded Copper Alloy Gate Valve For Waterworks Purpose Screwed Ends 50 mm Class 2 Valve : Suitable for cold working pressure up to 1.6 MPa Solid Wedge Type

Unbranded Copper Alloy Gate Valve For Waterworks Purpose Screwed Ends 25 mm Class 1 Valve : Suitable for cold working pressure up to 1.0 MPa Solid Wedge Type