Valves Tenders in West Bengal

Unbranded Copper Alloy Gate Valve For Waterworks Purpose Screwed Ends 65 mm Class 1 Valve : Suitable for cold working pressure up to 1.0 MPa Solid Wedge Type

TRINAM Copper Alloy Gate Valve For Waterworks Purpose Screwed Ends 80 mm Class 2 Valve : Suitable for cold working pressure up to 1.6 MPa Solid Wedge Type

HAWA MAKE 3 WAY CHANGE OVER VALVE, Non Slam Check Valve

Combined pressure reducing valve and double check valve to RDSO Drg. No. CONTR-9405-S-13 Alt. 18 , Item No. 23. or Latest, Material & Specification as per Drawing. Accepted make: PKKB

O and Mtc of distribution system ,rising main S/V including operation of Sluice valve of Baradoba PWSS under DWSD,PHE Dte (01.03.25 to 30.06.2025)

Supply of different dia Sluice valve, including C.I. / D.I. Specials to the Searsole Store of RCFA Part-II PWSS under RCFA Division-I PHE Dte.

Supply of DIDF pipes and specials and Sluice Valve for Uttar Mendabari Water Supply (SM/16539) Scheme OF Kalchini Block under Alipurduar Division P.H.E. Dte.

O and Mtc of distribution system ,rising main S/V including operation of Sluice valve of Dhorala PWSS under DWSD,PHE Dte (01.03.25 to 30.06.2025)

Supply of DIDF pipes and specials and Sluice Valve for Rangamati TG Water Supply Scheme (SM/14213) of Kalchini Block under Alipurduar Division P.H.E. Dte.

O and Mtc of distribution system ,rising main S/V including operation of Sluice valve of Khandari PWSS under DWSD,PHE Dte (01.03.25 to 30.06.2025)

SEAT/PLUG OF EXCESS FLOW CHECK VALVE AS PER DRG. NO. V-A3-001 ITEM NO. 01 , MAKE-ARIECKAL,CHANDRA & CO.,MIDLAND OR SIMILAR

PTFE GASKET FOR 1.25 inch CHECK VALVE TYPE 86R, OD: 38 mm , ID - 09 mm,THICKNESS 4.5 mm. ITEM IS RESERVED AS PER FOLLOWING.

1/2(half) INCH SOFT SEATED CHECK VALVE USED IN LOCOS. as per Drg.No. AS PER KPA DRG.NO. AR.3G2.593 C. ACCEPTED MAKE- IEC

3/4" PISTON TYPE DUPLEX CHECK VALVE SET OF 5.0 PLUS/MINUES 0.1 KG/CM SQUARE CLW DRG.NO. 0/3/65/103. Make- SKEE.

RUBBER PART KIT FOR DUPLEX CHECK VALVE TO RDSO DRG. NO. SKDP-1187, REF. 8,11,12 and 21 Alt-2 :- QUANTITY EACH ONE. Make:- OWN

3/4" PISTON TYPE DUPLEX CHECK VALVE SET OF 5.0 PLUS/MINUES 0.1 KG/CM SQUARE CLW DRG.NO. 0/3/65/103. MAke- RECON.

Check valve for BVZI wagon as per RDSO Drawing No.WD-83062-S-03, Alt -3. Material and specification as per drawing. Accepted make : PLS

Air Brake check valve assembly to RDSO/SK-98112, Alt-Nil, to RDSO Spec No 02-ABR-02, Amnd.3, appendix-1. Make- SAM

Set of rubber component for magnet valve of WSF make EP brake unit type ED6A comprising of - 1) Gasket for EP magnet valve unit to tripple valve to M/s WSF part no. B77717/1 Qty- 01 no. 2) Ball valve

Set of rubber component for magnet valve of WSF make EP brake unit type ED6A comprising of:- 1) Gasket for EP magnet valve unit to tripple valve to M/s WSF part no. B77717/1 Qty- 01 no. 2) Ball valve

9040M26G05 OHL Gutermuth Industrial Valves GmbH make valve spares

1/2" LIMITING VALVE WITH PIPE BRACKET [PRV] SET AT 3.8 KG/CM2 DRAWING No.WSF PT NO.C74344/1DRG No.DA6548/01

Ball Valve for Sanitary Facilities - 25 mm, to Drawing / Specification No. LW 63106,alt. Nil, Item No.5, Mat. & Spec. as per drawing.

Ball Valve for sanitary facility 25 mm. Drawing No. : RCF Drawing No. LW63106, Alt.-Nil, with ANX. - 1. Matl. & Spec: As per Drawing.

Ball Valve for sanitary facility 25 mm. Drawing No. : RCF Drawing No. LW63106, Alt.-Nil, with ANX. - 1. Matl. & Spec: As per Drawing.

RESTORATION OF FUNCTIONING OF ACTUATOR WITH NECESSARY ARRANGEMENTS FOR HT PUMP MOTOR NO-1 DELIVERY BUTTERFLY VALVE AND SLUICE VALVE AT G J KHAN BPS

GE/BENG/66 OF 2021-22 MAINTENANCE OF SWIMMING POOL AND REPAIR OF VARIOUS PUMPS CONTROL VALVES MOTOR AND PIPE LINE UNDER AGE E/M OF GE BENGDUBI MIL STN

Sluice Valve For Water Works Purposes (50 To 1200 Mm Size) (V2) As Per Is 14846 (Q3), PVC Insulated Copper Cable Single and Multi - Core Circular Sheathed Cable with Flexible Conductor (V2) as per IS 694 (Q2) (3 (3 ))

REP/MAINT OF OLD GI/CI PIPE LINE, SLUICE VALVE, CLEANING OF UG SUMP, REP/MAINT OF OLD GI/CI PIPE LINE, SLUICE VALVE, CLEANING OF UG SUMP, SERVICE TANK AND MISC ALLIED WORKS AT PEDONG AP ALGARAH, DALPCHAND AND TEESTA TCP UNDER GE 867 EWS

Stop Brake Valve SBS -20BA SAE 6 MH 653362 or Control Valve Block NG 25Q210 DP30 ident no. 653362/00 or COUNTERBAL VALVE BLOCK NG25 Q200 DP30 IDENT NO.653362/01, Make - MONTAN

ARC for servicing of M/s Dresser masoneilan make control valves installed in various units of Haldia Refinery on as and when required basis for 2 year

Sluice Valve For Water Works Purposes (50 To 1200 Mm Size) (V2) As Per Is 14846 (Q3), Copper alloy Taps/Stop Valves (V2) Conforming to IS 8931 (Q3), Rotational Moulded Polyethylene Water Storage Tanks (V2) conforming to IS 12701 (Q3), Bathroom Water Shower (V2) (Q3), Curtain Pipe, Sider and mounting bracket (Q4), Chequered Plywood for Bus Body Building Parts as per IS 3513 (Latest) (Q3) (3 (3 ))

NRV, SS 316 (Q3)

Replacement of under ground GI Pipe Non returning valve and gate valve of 10 HP submersible water pump installed at 157 BN HQ Campus under SHQ BSF Gopalpur

Set of maintenance hardware kits for 11/4 " Non Return Valve type 86R(modified) of M/s. SKEE make as per CLW Drg. No. 0/3/65/363, Ref nos. 04 & 06 or Latest if any. Set consists of 02 items as follows

1.1/4" [ONE POINT TWENTY FIVE INCH] NON-RETURN VALVE ASSLYEMBLY TYPE 86R AS PER CLWs DRG. NO.0/3/65/363 ALT.-2 [DETAILS AS PER CEE'S DRG. NO.LOCO/1/AE/250] AND TEST SPECN. NO.M/EL/57/T5-9 FOR ELECTRIC

1 1/4" NON-RETURN VALVE ASSEMBLY TYPE- 86R AS PER CLW'S DRG. NO. 0/3/65/363 (ALT.-2 ) [DETAILS AS PER CEE'S DRG. NO.LOCO/1/AE/250] AND TEST SPEC. NO. M/EL/57/TS-9 FOR ELECTRIC LOCOS. Make/Brand:SKEE

Combined pressure reducing valve and double check valve to RDSO Drg. No. CONTR-9405-S-13 Alt. 18 or Latest, Item No. 23. Material & Specification as per Drawing. ACCEPTED MAKE/BRAND :-PKKB

Procurement of Flow Control Valve for Hydraulic Unit of Coal Mill ZGM123N at unit-1 and 2, Stage-1(2x300 MW).

Gun Metal gate valve TRD double flanged with locking device as per drg. No. EMU/E2/SK-26. Item no.2.

Gate valve for main transformer of 3 phase locos as per ABB ID No.HSTN 40743P001 with latest alteration. Accepted Make - GCO.

Gate valve as per ELS/BZA's Drg.No.B/TRS/TFP/ 4/31, Alt.A size to 80mm. Firm's offer: MAKE/BRAND' GCO Makr

Gun Metal Gate Valve for Transformer (Bore 62mm) as per DY.CEE/WS/KGP's Drg. No. DY. CEE/WS/KGP/EMU/0112.

GATE VALVE FOR MAIN TRANSFORMER OF 3 PHASE LOCO AS PER ABB ID NO. HSTN 40743P001. Accepted Make-M/S,HVEPL

Gun Metal gate valve TRD double flanged with locking device as per drg. No. EMU/E2/SK-26. Item no.2.

Operating of all the different dia. sluice valve connected with distribution main / Raising Main and IEP for different PWSS within Madarihat-Birpara Block under Alipurduar Division., PHE Dte.PART-A

Rubber kit for C2W relay air valve consisting of 09 items as per ANEXURE. Accepted Firm's offer Make: EM.

Rubber kit for C2W relay air valve consisting of 09 items as per ANEXURE. Accepted Firm's Offer Make: EM.

Supply of CIDF/CIPE pipes and specials and Sluice Valve for Atiabari TG Water Supply Scheme(SM/14092) of Kalchini Block under Alipurduar Division P.H.E. Dte.

Supply and delivery of C.I. Sluice valve and D.I Specials under Improvement of RCFA Part-I Piped Water Supply Scheme under RCFA Division-I PHE Dte.