Loading
Loading…
Loading…
15,688 results • Best match
line item 1 Globe valve 4" (Q3), line item 2 Gate valve 12" (Q3)
Kit sander control valve to EMD part No. 40029184. DLW part No. 17455455. as per Drg.No. EMD Part No. 40029184 specn: EMD Part No. 40029184
Set of Rubber Kits for Wind Screen Wiper Motor and Control Valve as per attached document. For providing in Electric Locomotives ACCEPTED MAKE: RECON ONLY
Custom Bid for Services - Fabrication Machining and Spare development of various instrumentation component including control valve for forth comming shutdown year 2024 at Haldia Refinery
80mm size butterfly valve, 80mm size non-return valve, 200mm size butterfly valve, 80mm size flange, 5 by 8 inch nut bolt 5 inch length, 5 by 8 inch nut bolt 6 inch length, 80 by 40 reducer, 80mm gasket, 200mm gasket, Paint, 200mm MS pipe, 150mm MS pipe-Renewal, 150mm MS pipe renewal-Underground, 80mm MS pipe, AMC of Fire Hydrant System
GATE VALVE FOR MAIN TRANSFORMER OF 3 PHASE LOCO AS PER ABB ID NO. HSTN 40743P001 MAKE/BRAND:M/S HIGH VOLT ELECTRICALS PVT. LTD./HVEPL.
Overhauling Kit for Duplex Check Valve of M/s Knorr-Bremse make used in Air Spring Suspension system of EMU Coaches, consisting of 4 (Four) Nos. items in set.
Duplex check valve with soft seat 3/4 size for WAG-7 loco. Specification:- CLW Drg. No.-0/3/65/103 or latest. Firm`s Offer: Make/Brand:-EIW
24-A DOUBLE CHECK VALVE 1/2" BSP FAIVELEY PART NO-702003400, ESCORTS PART NO 3KB 5312 OR EQUIVALENT FOR USE IN SPIC/SPART/TOWER WAGON. Accepted Make: OWN
20 MM Check Valve With Choke, Drawing- RDSO SK-98112, Item-1 to 10, Alt-Nil & Spec No.-02-ABR-02 Amendment No. 4 of Sept.2016, Appendix-I.
20 MM Check Valve With Choke, Drawing- RDSO SK-98112, Item-1 to 10, Alt-Nil & Spec No.-02-ABR-02 Amendment No. 4 of Sept.2016, Appendix-1.
Duplex Check Valve with 1.5+/- 0.12 Kg/cm2 Pressure Setting for Air Suspension System. Mat. Spec.:-RDSO Specification no. C-K-407, REV-4 with latest revision and amendment.
DUPLEX CHECK VALVE with SOFT SEAT 3/4 INCH SIZE for WAG-7 loco specification CLW Drg.No-0/3/65/103 or latest. Firm`s Offer : Make/Brand :- EIW
REPAIR KIT FOR 3/4 inch DUPLEX CHECK VALVE CONSISTING OF 03 ITEMS: (I) PISTON PACKING, RECON PART NO.REC.40004, WSF PART NO. IB 70101/2, QTY = 01 NO. (II)VALVE RUBBER SEAT, RECON PART NO.REC.40003 WSF
Overhauling kit for check valve with choke to RDSO SK-98112 Alt Nil consisting of the following items: (1) Filter-item No.2 (1/ kit). (2) Valve sealing Ring-item No.4 (1/kit). (3)Compression spring-it
Overhauling kit for check valve with choke to RDSO SK-98112 Alt Nil consisting of the following items: (1) Filter-item No.2 (1/ kit). (2) Valve sealing Ring-item No.4 (1/kit). (3)Compression spring-it
Overhauling kit for check valve with choke to RDSO SK-98112 Alt Nil consisting of the following items: (1) Filter-item No.2 (1/ kit). (2) Valve sealing Ring-item No.4 (1/kit). (3)Compression spring-it
POH KIT FOR DUPLEX CHECK VALVE OF SIL MAKE FOR AIR SPRING CONSISTING O3 ITEMS AS PER RDSO SPECIFICATION NO. CK-407 S.N. Description SIL Drg/Part No. Qty 1. Valve body 08874301 or equivalent 02 Nos. 2.
"POH KIT FOR CHECK VALVE CONSISTING 04 ITEMS TO RDSO'S SK-98112, ALT. No.- NIL:- (1) FILTER, ITEM No.-2, QTY=1 No./SET. (2) VALVE SEALING RING, ITEM No.- 4, QTY = 1No./SET. (3) COMPRESSION SPRING, ITE
Overhauling kit for check valve with choke to RDSO SK-98112 Alt Nil consisting of the following terms: 1. filter -item No.2 (1/ kit) 2. Valve sealing Ring-item No.4 (1/kit) 3. Compression spring-item
REPAIR KIT FOR 3/4" DUPLEX CHECK VALVE CONSISTING OF 03 ITEMS: (I) PISTON PACKING, RECON PART NO. REC.40004, WSF PART NO. IB 70101/2, QTY = 01 NO. (II)VALVE RUBBER SEAT, RECON PART NO.REC.40003 W
Duplex check valve set at 1.5 Bar(Relief valve) As per FTRTIL part No 039001500 or Knorr Bremse part No 1.3.1902 or Escorts Drg No 3EB6632 Alt -03 or Equivalent conforming to RDSO Spec.No C-K 407 Rev.
Overhauling kit for check valve with choke to RDSO SK-98112 Alt Nil consisting of the following items: (1) Filter-item No.2 (1/ kit). (2) Valve sealing Ring-item No.4 (1/kit). (3)Compression spring-it
REPAIR KIT FOR 3/4 inch DUPLEX CHECK VALVE CONSISTING OF 03 ITEMS: (I) PISTON PACKING, RECON PART NO.REC.40004, WSF PART NO. IB 70101/2, QTY = 01 NO. (II)VALVE RUBBER SEAT, RECON PART NO.REC.40003 W
INSTALLATION OF TWO NOS 300MM DIA SLUICE VALVE ON 300MM DIA BYPASS LINE OF 1200MM DIA DEDICATED PIPELINE INSIDE TARATALA VALVE STATION UNDER GRWW.
Ball valve G3/4'' as per CLW spec no. CLW/ES/3/0117 Alt-C, CLW, Drg No. CLW/ES/3/SK- 1/0117, Alt-C. Make: SKEE
Single Stage LPG Regulator with adopter ( Ball valve forged, vertically mounted ) conforming to IS : 6901 : 2009 or ISO 2503-1998. Specification & other terms & condition as per annexure attached.
Ball Valve for Sanitary Facility 25 MM to RCF Drawing No. LW 63106, Alt- a, Item No.5, Material specification as per drawing. Accepted Make: SR or Similar.
Ball valve G3/4 inches as per CLW spec no. CLW/ES/3/0117 Alt-B, CLW, Drg No. CLW/ES/3/SK-1/0117/B. Make : Recon
BALL VALVE 1 INCH ( 25 MM) AS PER RCF DRAWING NO. LW63106, ITEM NO. 5 MATERIAL AISI304. Offered make: KYLA/Pls attach manufacturer test certificate with the supply.
MOEI & Fans including Compound light, RMO Electrical & Mechanical Service at Central Excise Office (GST) building, Kasba, Kolkata during 2022-23. (SH: Replacement of defective Single internal hydrant butterfly valve, RRL hose pipe etc. as required.)
SUPPLY, DELIVERY, INSTALLATION, TESTING AND COMMISSIONING OF DI 750 MM DIA NON RETURN VALVE (NRV) FOR STAND BY PURPOSE AT 10MG SUGR CUM CWPS OF GARDEN REACH WATER WORKS.
OPERATING VALVE FOR WIPER MOTOR TO CLW's DRAWING NO. 1209-07.303-018 FOR WAG9 LOCOMOTIVES. Firm's Offer: Control Valve Assy. WA as per Elgi Part No. 090344100 HSN Code 84149019 Mfd. by Elgi Equipments
PRESSURE REDUCING VALVE WITH ADAPTER FOR MODULAR BRAKE CONTROLLER TYPE ESBC-III(M) [SETTING OF THE PRV 5.0 KG/SQ.CM.]. Escorts Drg./Part no. 6700
Additional work for Laying MS pipe, different dia HDPE pipe and DI pipe alongwith providing sluice valve and construction of valve chamber and allied works at Domohani and adjacent area under Zone-XI and XII under RCFA Division-I PHE Dte.
Supply of C.I Alfa Alfa valve 150 mm dia C-type and Sluice valve ISI marked dia 150 mm P.N 1.6 with hand wheel under Ghatal (Agri-Mechanical) Sub-Division within Midnapore (Agri-Mechanical) Division under Non-Plan 2025-26.
Supplying and Delivery of Different dia CIDF Sluice Valve and Construction of Valve Chamber and allied works for Laying distribution of HDPE Pipe Line For Chenchur Gerya and its Adjoining Mouzas PWSS in Jhargram Block under Jhargram Division PHE Dte.
Supplying and Delivery of Different dia CIDF Sluice Valve, CIDF Pipes and Speci including Construction of Valve Chamber and allied works for Laying distribution of HDPE Pipe Line and Inter Connection between Tube Well and Rising main For Gohal Bura
Restoration of drain PCC road at Roopganj and Arrah repairing of valve chamber ,construction of massonary community tank with supply of 2000 ltr PVC tank at Arrah samshan supply fitting fixing and installatin of sluice valve under DWSD,PHE Dte
Supply of Materials (M.S. Hexagonal Head Nuts and Bolts, Alfa Alfa Valve C.1. Sluice Valve with hand wheel etc) for Maintenance of DTW/HDTW/ MDTW under Tehatta (A-I) Sub- Division under Krishnagar-I (A-I) Division (2024-2025).
NRV Set (including flange gasket)
REPAIRING AND OVERHAULING OF 600 MM DIA SLUICE VALVE FITTED ON 600 MM DIA BYPASS LINE OF 1600 MM DIA DEDICATED PIPELINE AT TARATALA VALVE STATION OF GRWW.
SUPPLY DELIVERY AND INSTALLATION OF NRV, DISMANTLING JOINTS, BUTTERFLY VALVE AND ACTUATORS WITH SPACERS ON PUMPS DELIVERY PIPELINE AT GANDHI MAIDAN BPS
Laying of pipeline including the cost of pipes, Fittings, and Specials including sluice valve situated at Joyanpur near Durga Mondir in Zone no.02, Ward no.09 and10 under Memari Municipality.
Supplying, Aligning, Laying of PVC and HDPE Pipeline, Construction of Sluice valve chamber and supplying, aligning, laying of G.I. pipe under Mangalpur W/S Scheme under RCFA Division-I PHE Dte.
Additional Supplying Aligning and laying HDPE pipe supplying sluice valve and others allied works of different places under Nutun Egara under Narayankuri W/S Scheme under RCFA Division-I PHE Dte.
Annual maintenance of pipe line (distribution and rising main) S.V OR SSP etc and operation of sluice valve related to the daily supply of water to the consumers of Prantik Township.
Rising Main, Laying of DI (K7), gap filling of HDPE pipe, construction of sluice valve chamber for washout purpose in the command area of NARASINGPUR PWSS under Alipurduar Division, PHE Dte.
Emergency repairing of 300 mm dia 350 mm dia rising main, construction of sluice valve chamber and other allied works under Amritnagar W/S Scheme under RCFA Division-I PHE Dte
Rising Main, Laying of DI (K7), gap filling of HDPE pipe, construction of sluice valve chamber for washout purpose in the command area of Malsagaon PWSS under Alipurduar Division, PHE Dte.