Valves Tenders in West Bengal

Land development, construction of pathway of HWS and 2nd site of different sluice valve chamber and concrete blocks for MS pipe Jainti TG (Nimbu Dhora) WSS under Alipurduar Division, PHE Dte.

Wiper Control Valve (Specn. No. CLW-MS-3-050-Alt-6 CLW Drg. No. 1209-08-032-023 Alt-Nil, CLW Drg. No. CLW/AC/163)

Duplex check valve 3/4" to CLW Drg.no. 0/3/65/103 Alt-2 or latest alteration up to date of tender opening. (WSF pamphlet no.AI 205, part No.IC 70024/1). Accepted Firms Offer: Valve, Check Duplex 3/4

3/4" Duplex check valve (with soft seated valve) as per CLW Drg. No. 0/3/65/103 Alt.2 (WSF pamphlet no.AI205, part no. IC 70024/1). EACH UNIT SHOULD BE EMBOSSED/ENGRAVED WITH MARKERS NAME, MONTH, YEAR

Check valve ( non returnable valve with choke 1/2" ) to drg. no. SK-98111 Alt-1 or latest & SK-98112 Alt-nil or latest, confirming to RDSO Spec. no. 02-ABR-02 with amndt. No 4 of Sept-2016.

Duplex check valve set at 1.5 Bar(Relief valve) As per FTRTIPL part No 039001500 or Knorr Bremse part No I.3.1902 or Escorts Drg No 3EB6632 Alt -03 or Equivalent conforming to RDSO Spec.No C-K 407 Rev

Procurement of Different Knife Gate Valve (KGV) with Actuator for 1Y and 2Y Dry Ash Conveying Line Restoration at AHP,Stg1,SgTPP through Capex 2021-22

Supply, delivery and installation of Non Return Valve (Replacement of existing changed valves) and other electrical works at ISLS-I, AA-I under NTK Project.

1-1/4" Tubular check valve WSF drawing/part no. B78460/1 or similar, or RECON pt no. REC/TCV/1001, or ESCORT pt no. 3A24899/1. Accepted Make: OWN

Duplex Check Valve with 1.5kg/cm sqr. Pressure setting for Air Suspension System to Drawing/Specification As per RDSO Specification No-C-K407(Rev-3), Amendment No.1. Make : APEE

Check Valve Assembly for coaching" RDSO Drawing No: SK-98112, Alt-Nil. Material Spec: As Per Drawing and 02-ABR-02 with 4 Amendments (Last Amendment-4 of Sept. 2016)

Procurement of unloading tee, diffuser feeder assy, ash intake valve, TERSG valve, vent valve and spares of these valves etc. for AHP-MM Dept., BTPS.

DN500 SIZE, WAFER TYPE BUTTERFLY VALVE, SEAT SLEEVE KIT FOR REPAIR AND FITMENT INTO DN500 WAFER TYPE BUTTERFLY VALVE

Hose Control Valve Assy of TATA Hitachi Ex 70, Diesel Tank Stainer of TATA Hitachi Ex 70, Engine Oil Filter of TATA Hitachi Ex 70, Fuel Filter Set of TATA Hitachi Ex 70, Hyd Filter of TATA Hitachi Ex 70, Self Starter of Dozer BD-50, Fuel Filter of Dozer BD-50, Fuel Filter Cotton Type of Dozer BD-50, Baby Fuel Filter of Dozer BD-50, Air Element Filter of Dozer BD-50, Tow Pin Rear of Dozer BD-50, Cabin Fan for Dozer BD-50, Diesel Tank Filter Cap for BD-50

Supply Delivery, installation of Actuator operated Butterfly Valve at Delivery distribution pipe line of existing OHR site supervision and auto operation through PLC controlled Motor controlled Center Panel at Pump House 1 at Islampur ground water

BALL VALVE G 3/4" as per CLW specification No. CLW/ES/03/0117 ALT-B or latest and CLW drawing No. CLW/ES/3/SK1/0117 or latest.

Ball Valve for sanitary facility 25 mm. Drawing No. :RCF Drawing No. LW63106, Alt.-Nil, with ANX. - 1. Matl. & Spec: As per Drawing. Firm offers Make/Brand "OWN MAKE".

Single stage LPG regulator with adopter ( Ball valve forged, vertically mounted). Conforming to IS: 6901-2009 or ISO 2503-1998. Make: GCE / MESSER / ESAB / HMP. Specifications & other terms & conditio

Single Stage LPG Regulator with Adopter (ball valve forged, vertically mounted) conforming to Specification IS:6901-2009(ISO2503- 1998). Detailed Specification 1. Max inlet pressure 25 bar 2.outlet

Ball valve G 3/4 inches as per CLW spec no. CLW/ES/0117 ALT- B, Drg no.CLW/ES/3/SK-1/0117/B Firms Offer: --do-- MAKE: RECON.

SINGLE STAGE LPG REGULATOR WITH ADOPTER (BALL VALVE FORGED, VERTICALLY MOUNTED) CONFORMING TO SPECIFICATION IS: 6901-2009 (ISO 2503-1998) DETAILED SPECIFICATION: (1) MAX INLET PRESSURE 25 BAR. (2)

Single stage LPG regulator with adopter ( Ball valve forged, vertically mounted). Conforming to IS: 6901-2009 or ISO 2503-1998. Specifications & other terms & conditions as per annexure attached. Firm

BALL VALVE G-3/4 INCH TO CLW SPECIFICATION NO. CLW/ES/3/0117 ALT.- C, AND DRAWING NO. CLW/ES/3/SK-1/0117, ALT.- C. Make :- RECON

Supply of Single Stage LPG Regulator with Adopter (ball valve forged, vertically mounted) conforming to Specification IS: 6901-2009(ISO2503- 1998). Detailed Specification 1. Max inlet pressure 25 bar

Single Stage LPG Regulator with Adopter (ball valve forged, vertically mounted- conforming to Specification IS: 6901-2009(ISO2503- 1998). Detailed Specification (1) Max inlet pressure 25 bar (2) Outl

CAST STEEL SLUICE VALVE 6 INCH WP 1000 PSI AND TESTED 2000PSI FOR INDUSTRIAL USE HEAVY DUTY WITH MFG TEST CERTIFICATE, CAST STEEL NON RETURN VALVE 6 INCH WP 1000 PSI AND TESTED 2000PSI FOR INDUSTRIAL USE HEAVY DUTY WITH MFG TEST CERTIFICATE, CAST ... FOOT VALVE 6 ... STEEL SLUICE VALVE 8 ... STEEL NON RETURN VALVE 8 ... FOOT VALVE 8 ...

Maintenance of defective Non-Return Valve of pump no. 1 at Park Circus BPS.

Maintenance of defective Non-Return Valve of pump no. 3 at Park Circus BPS.

Repairing replacement of cooling tower CW return line header and return line header to FCV (Flow Control Valve) connecting damage pipe during U1 OH25 period

Pressure Relieving Valve (PRV) as per spec. ABB HSTN 400429 for WAG-9 loco main Transformer. Firm should submit TC & GC from OEM along with material.

Repair and maintenance of CI main water supply pipe line and Lowering of 17 H.P Submersible pump with motor replacement of CI sluice valve, lead joint at Kendra colliery under Pandaveswar Area.

Shifting (loading and unloading) and Installation 01 no. of 2400 GPM Pump motor Set with accessories including supply and fitting of Flexible hose pipes and sluice valve setc under S. B. Project.

Renewing of RCC cover slab of sluice valve chamber and partially construction of sluice chamber of Ethora distribution zone under RCFA Part-I water supply scheme under RCFA Division-I PHE Dte.

Additional Supplying aligning laying HDPE pipe Mechanical fitting supplying sluice valve and other allied works at (Mouza-Sahenganj) under Zone-16 Part-II W/S Scheme under RCFA Division-I PHE Dte.

Supplying , fitting fixing of 800 mm dia Cast Iron gear opertaed sluice valve at High lift for improvement of Quality Quantum of drinking water of Dihika Pump House under Asansol Municipal Corporation

Additional work for emergency installation of sluice valve, HDPE pipe, repairing of FHTC and etc allied works within command area of Zone-VII i.e Malbahal OHR under RCFA Division-I PHE Dte.

Laying of pipeline including the cost of pipes, Fittings, and Specials including sluice valve situated at Radhapally near house of Swapan Nayek in Zone No-01,ward No-01, under Memari Municipality.

Repairing and maintenance of Sluice Valve 127 nos. 40 mm, 100 mm, 150 mm, 200 mm, 250 mm, 300 mm, 350 mm and 500 mm at Raniganj Borough- II area under A.M.C

Site clearance of all pump house premises including construction of sluice valve chamber of Kanksa zone 1, Kanksa zone A, B, C D of Kanksa Block under RCFA Division-I PHE Dte.

Additional Supplying, Aligning and Laying of HDPE pipe line construction of sluice valve chamber and other allied works at different places under Mangalpur W/S Scheme under RCFA Division-I PHE Dte.

POH kit for check valve as per RDSO Drg. SK-98112, Alt.- nil, consisting of five items:1] filter, item no.- 2, qty= 1/kit. 2] choke, item no.- 3, qty= 1/kit. 3] valve sealing ring, item no.- 4, qty =

POH KIT FOR CHECK VALVE AS PER RDSO'S SPECN. NO. 02-ABR-02 WITH APPENDIX-I OR LATEST CONSISTING 04 ITEMS:-(1) FILTER TO RDSO'S SK-98112, ITEM NO-2, ALT.NO.-NIL OR LATEST .QTY=1 NO. (2) VALVE SEALING R

"POH KIT FOR CHECK VALVE AS PER RDSO DRG No. SKETCH-98112 ALT. NIL, CONSISTING OF 04 ITEMS :- (1) FILTER TO ITEM NO. 2, QTY=1 NO. (2) VALVE SEALING RING TO ITEM NO. 4, QTY=1 NO. (3) COMPRESSION SPRIN

POH kit for check valve as per RDSO Drg. SK-98112, Alt.- nil, consisting of five items: 1] filter, item no.- 2, qty= 1/kit. 2] choke, item no.- 3, qty= 1/kit. 3] valve sealing ring, item no.- 4, qty

POH KIT FOR CHECK VALVE AS PER RDSO DRG No. SKETCH-98112 ALT. NIL, CONSISTING OF 04 ITEMS :- (1) FILTER TO ITEM NO. 2, QTY=1 NO. (2) VALVE SEALING RING TO ITEM NO. 4, QTY=1 NO. (3) COMPRESSION SPRING

3/4" DUPLEX CHECK VALVE (WITH SOFT SEATED VALVE) AS PER CLW drg No. 0/3/65/103 Alt.2 (WSF pamphlet no.AI S205, part no. IC 70024/1). EACH UNIT SHOULD BE EMBOSSED/ENGRAVED WITH MARKERS NAME, MONTH, Y

ONE SET OF AIR SPRING PNEUMATIC CONTROL EQUIPMENT FOR LHB BOGIE CONSISTING OF 1. LEVELLING VALVE TO RDSO/SK-K1049 ALT-1, QTY- 2 NOS 2. DUPLEX CHECK VALVE SET AT 1.5 +/-0.12 KG/SQCM TO RDSO/SK-K1051,Q

POH KIT FOR CHECK VALVE AS PER RDSO DRG No. SKETCH-98112 ALT. NIL, CONSISTING OF 04 ITEMS :- (1) FILTER TO ITEM NO. 2, QTY=1 NO. (2) VALVE SEALING RING TO ITEM NO. 4, QTY=1 NO. (3) COMPRESSION SPRING

POH KIT FOR CHECK VALVE AS PER RDSO DRG No. SKETCH-98112 ALT. NIL, CONSISTING OF 04 ITEMS :- (1) FILTER TO ITEM NO. 2, QTY=1 NO. (2) VALVE SEALING RING TO ITEM NO. 4, QTY=1 NO. (3) COMPRESSION SPRIN

ONE SET OF AIR SPRING PNEUMATIC CONTROL EQUIPMENT FOR LHB BOGIE CONSISTING OF 1. LEVELLING VALVE TO RDSO/SK-K1049 ALT-2, QTY- 2 NOS 2. DUPLEX CHECK VALVE SET AT 1.5 +/-0.12 KG/SQCM TO RDSO/SK-K1051, A