Loading
Loading…
Loading…
2,900 results • Latest
gate valve Gate Valve ( 150 ) Technical Specifications Specification Specification Name Values Allowed Values SIZE/TYPE DIMENSIONAL MATERIAL Classification Class 1 Valves Class 1 Valves, Class 2 Valves Nominal Size of Valve 15 8, 10, 15, 20, 25, 32, 40, 50, 65, 80, 100 Type of Gate Valve Solid Wedge Solid Wedge, Split Wedge, Double Disk Type of Valves End Screwed End Valve Screwed End Valve, Flanged Valve Type of Bonnet Screwed-in Bonnet Screwed-in Bonnet, Screwed-on Bonnet, Bonnet Flanges, Bonnet Bolting Material of Bonnet or Cover Leaded Tin Bronze Leaded Tin Bronze, Forged Brass, Brass Material of Body Leaded Tin Bronze Brass, Leaded Tin Bronze Material of Stem, Hinge Pin and Plug Extruded Brass Rod - Word 'OPEN' or 'SHUT' with arrow to indicate Direction On Plate Secured Below the Handwheel Nut - Weight 0.37 - CONFORMITY Conformity to Indian IS 778 : latest - 1/2 CERTIFICATION Standard ISI Marking true Availability of Test Report from Central Govt/NABL/ILAC accredited lab to prove conformity to specification true - Test Report No and Date - - Name and Address of the Lab - - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Vishal Bedi 411003, Ammunition Factory Khadki, Pune 150 15 EMD Required No ePBG Required No
LED Luminaire (For Road and Street Lights) Average Turn Over of Last 3 Years 4 Lakh (s) Experience with Gov. Required 2 Year (s) LED Luminaire (For Road And Street Lights) ( 215 ) Technical Specifications Specification Specification Name Values Allowed Values STANDARDS LED Luminaire conformity to IS:10322/Part 5/Section 3/2012 latest and IS: 16107 (Part 2/Sec 1):2012 latest Yes - Photo biological safety of LEDs used shall be as per IS:16108/2012 (exempt group) Yes - Types of LED Luminaire as per the IS: 16107(Part-2 Sec.-1)/2012 Type B - Types of LED Modules as per the IS:IS: 16103(Part-2)/2012 Type 3 - LED Rating (in Watts)/System Wattage/Rated Power 45W 45W Luminaire System Efficacy (Lumen/watt) >/= 100 Lm/Watt - 1/7 Ingress Protection (IP Rating) as per IS:10322 (Part 1):1982 latest IP66 - Warranty for free replacement (in years) 2 2 ELECTRICAL EFFICIENCY Input operating Voltage range and frequency 140 to 270 V olts AC at 50 Hz+/-2 with auto cutt off at below 120V - Automatic Higher Cut off voltage above 300 volt Yes - Rated voltage 230 V AC 50 Hz - AC Power Factor at full load ≥ 0.95 - Driver Efficiency (in %age) Upto 100W: ≥85%, Above 100W: >/=90% Yes - Total Harmonics Distortion ≤ 10 - "The total circuit power shall not be more than 110 percent of the value declared by the manufacturer (as per Cl. 8 of IS:16104:2012 lates)" Yes - OPTICAL LED chip Efficacy ≥130 Lm/Watt - Colour temperature 6000+/-500K - Working life for LED (Minimum 50, 000 burning hours as per LM-80 and LM 21 reports) Yes - Colour Rendering Index(CRI) ≥70 - LED Beam Angle ≥120 - Optic lense materal (UV stabilised) Poly carbonate lense - THERMAL MANAGEMENT Heat sink should be die- cast aluminium along with sufficient heat sink fins to dissipate heat effectively Yes - Junctiojn/Soldering point temperature shall not exceed 85 deg.c as per LM 80 report Yes - 2/7 Capacitor shall be rated for a temperature of 105 deg. celsius or better Yes - Operating temperature range -20 deg. C to +50 deg. C -20 deg. C to +50 deg. C, 10 deg C to +50 deg C, 10 deg C to +55 deg C Operating Humidity Range 10 % to 95% RH - PROTECTION Short circuit Protection Yes - Over load protecton Yes - Over Voltage protection Yes - Reverse polarity Yes - High voltage test (1.5 KV for one minute between supply terminals and body of the unit) Yes - Insulation resistance between earth and current carrying part >100 M Ohm - The luminaire shall be protected against surges and transients ( Internal) >/=4KV - The luminaire shall be protected against surges and transients of >/=10KV (External) No - CONSTRUCTIONAL The Luminaires casing/housing (single piece housing) shall be pressure die casted aluminium alloy with higher thermal conductivity Yes - The luminaire body must be corrosion resistant powder coated Yes - All fastners must be of stainless steel Yes - Protection of the entire housing (both LED section and driver section) as per IS:10322 (Part 1):1982 latest IP66 - 3/7 Extruded silicon loop gasket shall be provided in the lantern body to ensure a weather proof seal between the UV Glass cover and the metal housing to exclude the entry of the dust, water, insects etc., Yes - Luminaries light transparency should be of Toughened glass Yes - Toughned transparent glass cover thickness >/=4 mm - Toughned Glass shall not get discoloured shall not suffer degration due to heat and ageing within warranty period Yes - Number of electronic control gear (power supplies) 1 No. 1 No. Light Source SMD LED Chip as per LM 80/IS16106 - Driver components shall be industrial grade or above Yes - PCB shall be FR4 grade minimum 0.8 to 1.0 mm thick or more Yes - The Luminaires works on single phase three wires system (Phase, Neutral and Earth) Yes - Suitable connector shall be provided for LED connection between driver output and LED Yes - Length of ISI marked three core wire (shall be provided along with supply of material) 50 cm 50 cm, 100 cm MARKING "Manufactures Name and and brand on the aluminium die cast body " Engraved/Embossed - 4/7 Manufacturer’s name, model number, serial number Yes - Date of manufacture (month-year), and lot number as identification mark inside each unit and the outside of each packaging box Yes - The operation characteristics voltage and power be marked inside of each LED luminaire unit Yes - Diameter of pole Luminiare suitable for: (upto 45W Pole OD: shall be 40mm), (>45W<120W Pole OD: Shall be 50 mm), (above 120W: OD shall be 60 mm for which luminiare is suitable Yes - REPORTS AND CERTIFICATIONS LED Make OSRAM/NICHIA/CREE SAMSUNG/SEOUL LUMILEDS/PHILIPS SYSKA/LUMENMAX EVERLIGHT/EDISON BRIDGELUX NATIONSTAR/REFOND - System must have EMI/EMC compliance as applicable (Test reports shall be furnish to the buyer/consignee on demand) Yes - LM 79 (Photometry) (Ref.IS:16106:2012) report from Central Government Lab NABL/ILAC accrediated lab. Reports shall be furnish to the buyer consignee on demand (LM-79 report shall have total lumen output, power, PF, Current in Amps, CRI & CCT etc., ) Yes - LM 80 & TM 21 (Ref. IS:16105:2012) Report and Photo biological Yes - 5/7 report for LED report from Central Government Lab NABL/ILAC accrediated lab. Reports shall be furnish to the buyer consignee on demand (LM-80 report shall have the Pohoto Biological report of the LED Chip being used in the luminaire) Availability of test Report from Central Government Lab NABL/ILAC accrediated lab to Indian Standrad IS:10322/part 5/sec-3/2012 and IS 16107 (Part 2/Sec 1) : 2012 Yes - Seller shall furnish the Type test reports to the buyer/consignee on demand Yes - DC or AC supplied electronic control gear for LED Module shall comlpy as per IS:15885 (Part 2/Sec.13) Yes - LED Luminaire for road and street lighting shall comply with Complusory Registration(CRS) of BIS for safety as per IS 10322 (Part 5/Section 3): 2012 as applicable on date Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Mahesh Chand Bairwa 421502, Ordnance Factory Ambernath Ambernath, Thane 421502 215 15 EMD Required No 6/7 ePBG Required No
Human Resource Service
LED Lamps- bulb LED Lamps- Bulb ( 2000 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC LED LAMP Power Ratings/LED Lamp Luminous Flux 7Watt/700 lumens 7Watt/700 lumens Colour Temperature (K) 6500 2700, 4000, 5700, 6500 Type of Lamp CAP B22d B22d, E27 Warranty for free replacement (Years) 2 Years 2 Years, 3 Years Conformity to Indian Standard IS:16102 part I and Part II latest - FUNCTIONAL LAMP Efficacy (Lm/W) >/=100 - LED Chip Efficacy (Lm/W) >/=130 - Colour Rendering Index(CRI) >/=80 - Beam Angle (Degree) >/=120 - Power Factor >/=0.9 - Total Harmonics (%) </=15 - Driver Efficiency (%) >/=85 - LED chip Wattage (Watt) </=1 - Surge Voltage 2.5 - 1/3 withstand (KV) Operating Voltage range (Volts) 100 Volt to 300 Volt - Rated Voltage for Performance and life (Volts) 220 Volt to 240 Volt - Lumen maintenance @ 25 deg after 6000 hours (%) >/=80 - CONSTRUCTIONAL Light Source (as per LM80 orIS16106) 6500 - LED Make surya - Light Source (as per LM80/IS16106) SMD LED Chip - Lamp Shell material Polycarbonate - Ingress Protection in IP >/=20 - TEST REPORT AND CERTIFICATIONS LED life Certificate for 25000 hrs as per LM80 Yes - LED life test Certificate No. 545261 - LED life Certificate Test Report Date 01/06/2014 - LED lamp life certificate for 6000 hrs Yes - LED Lamp certificate Number 425621 - LED Lamp Life Certificate date 04/09/2015 - Name of Lab where test conducted BHARAT TEST HOUSE - EMC Test Yes - Availability of test Report to IS:16102 Part I and IS:16102 Part II latest Yes - Test certificate No. 342681 - Test Report Date 08/09/2016 - Name of lab where test conducted BHARAT TEST HOUSE - Complusory Registration(CRS) of BIS for safety as per IS 16102-I Yes - * Bold specifications are the golden parameters. Consignees and Quantity 2/3 S.No. Consignee Address Quantity Delivery Days 1 HANUMANT SINGH 208009, SMALL ARMS FACTORY KALPI ROAD KANPUR 208009 2000 15 EMD Required No ePBG Required No
plastic moulded chair Plastic Moulded Chair ( 100 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC TYPE OF CHAIR PLASTIC MOULDED SEAT CUM BACK WITH SUPPORT STRUCTURE SINGLE PIECE PLASTIC MOULDED, PLASTIC MOULDED SEAT CUM BACK WITH SUPPORT STRUCTURE, SEPERATE PLASTIC MOULDED SEAT AND BACK FITTED ON SUPPORT STRUCTURE Seat cushion With With Back Cushion With With Conformity to Indian Standard IS 13713- Latest true - Plastic Material FILLED THERMOPLASTIC FILLED THERMOPLASTI C, UNFILLED THERMOPLASTIC, FILLE D THERMOSETTING PLASTIC, UNFILLED THERMOSETTING PLAS TIC, POLYPROPELENE, PV C (Polyvinyl Chloride), ABS PLASTIC (Acylonitrile Butadiene Styrene) ARMS With arms With arms 1/3 DIMENSION & WEIGHT Seat Width in mm (+/- 5 mm) 560 345, 365, 385, 400, 415, 4 25, 455, 475, 500, 510, 52 0, 530, 540, 550, 560, 570 Seat Depth in mm (+/- 5 mm) 500 340, 360, 380, 410, 4 20, 430, 440, 450, 460, 47 0, 480, 490, 520, 560 Chair Height in mm (+/- 10 mm) 890 500, 750, 770, 7 90, 805, 825, 840, 850, 87 0, 890 Chair Dimensions Conforming To IS 3663 (Latest) - Weight of Chair (IN Grams) 4500 - Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) 55 40, 45, 50, 55, 60, 65, 70, 7 5, No Cushion Density of PU Foam in KG per CuM 55 40, No Cushion Thickness of Polyurethane Foam Used in Backrest in mm (+/- 2 mm) 55 40, No cushion PERFORMANCE Stability of the Chair Conforming To IS 5416 (Part 2) - Strength of the Chair Conforming To IS 5416 (Part 1) - Maximum Ash Content is Not more than 1% in Conformity test as per Annex D of IS: 14887 (Latest) Complied that Ash content is less than 1% - UV Resistance Test - % of Tensile strength retention after 192 hours exposure as per ASTM D2562 -99 Table 1- Cycle Number 2 is more than 50 % Complied Minimum 50% tensile strength retained after exposure as per test - Support/Under Structure Support/Under Structure Sigle Moulded Piece No Support Structure SS 202 STRUCTURE, SS 304 STRUCTURE, Mild Steel Pipe of diameter 25 mm and wall thickness 1.1 mm minimum, Sigle Moulded Piece No Support Structure Support Structure Finishing Powder coated Stove enameled Paint, Powder 2/3 coated, chrome, epoxy polyester, synthetic enamel, Natural Steel Finish, Sigle Moulded Piece No Support Structure CERTIFICATION ISI Marked false - CML No. If ISI Marked NA - Test reports to be furnished to buyer on demand YES - MISC Colour Black - WARANTEE PERIOD WARANTEE PERIOD IN NUMBER OF YEARS 1 1, 2, 3, 4, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 UJJWAL KANT 767070, ORDNANCE FACTORY BADMAL, AT/PO- BADMAL 100 90 EMD Required No ePBG Required No
power cord-Flexible electric cable Heating cables or Wire cotton Power for Heater Power Cord-Flexible Electric Cable Heating Cables Or Wire Cotton Power For Heater ( 900 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Conformation of cable to IS: 694 for PVC insulated cable IS: 694 for PVC insulated cable BIS Marked Yes - CM/L No 8158075 - CONSTRUCTIONAL Working voltage Upto 1100V - Type of insulation PVC PVC Type of sheath PVC PVC Sheated Yes Yes Outer cover material Non braided Non braided, Braided No. of cores 3 3 Conductor material Copper - Size of the conductor 2.5 - Type of conductor Stranded - Type of service General - Type of flexible cord Unkinkable - Length of cable in a bundle (meter) 100 - Cable bundle weight (kgs) 12 - 1/2 CERTIFICATIONS Availability of Type test report from Central government/NABL/ILAC accridiated laboratory to prove conformity to the specification Yes - Test report number IEC - 332-1, IEEE-383, Test Report Date 01.02.14 - Name of Lab Havells india Lab. - Address of the lab Haryana, india - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Vishal Bedi 411003, Ammunition Factory Khadki, Pune 900 30 EMD Required No ePBG Required No
Handloom Cotton Turkish, Honeycomb and Huckaback Towels Handloom Cotton Turkish, Honeycomb And Huckaback Towels ( 933 ) Technical Specifications Specification Specification Name Values Allowed Values SPECIFICATION Governing Specification BIS specification No IS 854/1991 or latest - Variety No as per IS specification, Mass ( gram per square meter ) Variety No-1 ( Turkish Towel ), 300g Variety No-1 ( Turkish Towel ), 300g, Variety No-2 (Turkish Towel), 317g, Variety No-3 (Turkish Towel), 400g, Variety No-4 ( Turkish Towel ), 500g, Variety No-5 ( Turkish Towel ), Variety No-6 ( Turkish Towel ), 350g, Variety No-7 (Turkish Towel), 550g, Variety No-1 ( Honeycomb Towel ), 185g, Variety No-2 ( Honeycomb Towel ), 200g, Variety No-3 ( Honeycomb Towel ), 220g, Variety No-4 ( Honeycomb Towel ), 240g, Variety No-5 (Honeycomb Towel), 190g, Variety No-1 ( Huckaback Towel ), 290g, Variety No-2 ( 1/3 Huckaback Towel ), Variety No-3 ( Huckaback Towel ), 290g MANUFACTURE Manufacturing Type Handloom - SIZE Size ( Length X Width ) (cm) 150 X 75 150 X 75, 155 X 80, 152 X 60, 125 X 50, 122 X 66, 122 X 61, 117 X 66, 100 X 50, 91 X 61, 60 X 40, 64 X 37, 120 X 60, 122 X 69, 154 X 81 COLOUR Colour White, Bleached White, Bleached, As per buyer's requirements WEAVE Weave Terry Weave (Turkish Towel) Terry Weave (Turkish Towel), 4-end Honey comb (Honeycomb Towel), 5-end Honey comb (Honeycomb Towel), 6-end Honey comb (Honeycomb Towel), Hucka back (Huckaback Towel) OTHER REQUIREMENTS Ground to Pile Ratio 1 : 3 1 : 3, 1 : 4, 1 : 5, Not Applicable Transverse End Finish Fringe 4 to 5 cm in length - Wettability (Max) 10 - LOGO AND MARKING Logo/Totem No As per buyer's requirements, No Handloom Mark false TEST REPORT Availability of Test Report from NABL ILAC accredited or Central Government Lab to prove conformity of products to the specification true Test Report No 58673 - Test Report Date 227062017 - Name of the Lab NAC - Address of The Lab DELHI - Test reports to be furnished to buyer on demand, if claimed to be available Not applicable - * Bold specifications are the golden parameters. Consignees and Quantity 2/3 S.No. Consignee Address Quantity Delivery Days 1 Raj Kishore 600054, JOINT GENERAL MANAGER, GS & TOOLS SECTION, HEAVY VEHICLES FACTORY, AVADI 933 30 EMD Required No ePBG Required No
Human Resource Service
Human Resource Service
Human Resource Service
operating system software Operating System Software ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values BASIC INFORMATION OF OPERATING SYSTEM SOFTWARE(GOLDEN) Software Domain Type Proprietary Item Proprietary Item, Enterprise open source Name of Software WinSvrSTDCore 2016 SNGL OLP 2Lic C CoreLic (16 Core/8 licenses) - Name of the OEM Microsoft - OEM Model/Part No. 9EM-00123 - Product Id of OEM 9EM-00123 - Software Version/Version Name Std 2016 - Date of Launch of Version July 2015 - FEATURES AND FUNCTIONALITY PARAMETERS(GOLDEN) Type of Operating System Server (Network) Operating System Desktop/Laptop Personal Computers Work-Station Operating System, Mobile Devices Tablet Computers Operating System, Server (Network) Operating System, Mainframe Operating System, Super Computer Operating 1/4 System, Web server Operating System Tasking multi-tasking OS single tasking OS, multi- tasking OS Users Multi User Single User, Multi User Distributed Operating System false Resource Access Control true If Yes, details of Access Control Cal Installation and Demonstration false Supports Virtualization true No. of days Training Provided at Site (DAYS) 0 0, UPTO 5, 6 TO 10, 11 to 20 Number of Years upto which Support(Warranty) is available from OEM Franchise online (YEARS) 1 1, 2, 3 FEATURES AND FUNCTIONALITY PARAMETERS(GENERIC) Real-time Operating System true - Library Operating System true - Graphical User Interface (GUI) true - Supported File Systems Disk file systems - Kernel Type Micro Kernel - Package Management true - If Yes, details of Packages Proprietary software systems - Bit-type (BITS) 64 - Native APIs false - Non-Native APIs supported through subsytems false - If Yes, details of supported APIs NA - Subsystem Isolation Mechanisms false - If Yes, details of Isolation Mechanisms NA - 2/4 High availability extension true - Integrated Firewall true - If Yes, details of Firewall NA - Encrypted File System true - SUPPORTED HARDWARE REQUIREMENT PARAMETERS Hard Disk Space required (GB) 32 - RAM Size required 4 - CPU Required 1 - Operating Systems supported (Driver) windows - Supported Devices Microsoft - Supported Web browsers IE - Supported Database SQL - Number of Devices Managed NA - GENERIC PARAMETERS OF OPERATING SYSTEM SOFTWARE Free Upgradation to Higher Version YES - Maximum user handling capability NA - Concurrent user handling capability NA - Valid Licence copy to be provided YES - Software supplied through Media & URL Link - List of items included in the package NA - Hyper link to Data sheet WWW.MICROSOFT.COM - No of Software sold 10000 - Number of User Referance no. 1 with in Government Department email, phone no.Of concerned authority where Software/Appliance installed 1 - Details of Government Department email, phone no.Of concerned authority where Software/Appliance On demand - 3/4 installed for above. * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Devashish Chandra 560017, Hindustan Aeronautics Limited Overhaul Division Vimanapura Post Bangalore 1 45 EMD Required No ePBG Required No
high performance power supplies High Performance Power Supplies ( 5 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Power Supply Type DC AC, DC, AC + DC, Benchtop DC Number Of Outputs 1 1, 2, 3 Output Voltage Single Value - Output Current Single Value - Warranty (Year) >/=1 Year - CONSTRUCTIONAL Dimensions (in mm) 430 x 43.6 x 483 - Input and Output Interfaces LAN/LXI/Ethernet, USB, RS-232, RS-485, Analog - Accessories to be Supplied Software CD & CoC - Weight (Kg) 10 - FUNCTIONAL Line Regulation ( in percentage ) 0.005% of FSV +2 mV - Input for Power Supply 230V ±10%, 50Hz - Display and Control Features V, I, protection limits, fault status, remote- local-foldback indications, interface selection & setup - Multiple Steps to cover the voltage and Current Ranges Yes - 1/5 Output Ripple and Noise and Maximum ( in mV rms) Ripple: 8 mVrms Noise: 50 mVp-p - Total Harmonic Distortion (THD) NA - Operating Temperature Range (Degree Celcius ) 0°C to 50°C - Meter Two 3½ digit LED displays, and LED fault indicators - Protection Over Voltage, Over Current, Under Voltage, Over Temperature - Efficiency ( in percentage) 87% - Programmable Output Frequency Minimum (in Hz) NA - Programmable Output Frequency Resolution ( in Hz) NA - Power Factor NA - Transient Response (in microSec) 1000 - Operating Humidity Range ( in percentage) 30% - 90% RH (no condensation) - Load Regulation ( in percentage ) 0.005% of FSV +2 mV - AC Setup Resolution for AC Power Supply (Current) ( in mA) NA - Programmable Output Frequency Maximum ( in Hz) NA - Output Current Range For AC Power Supply ( in A) NA - Accuracy for AC Power Supply (Voltage) NA - Readback Resolution for AC Power Supply (Voltage) (in mV) NA - Output Voltage Range For AC Power Supply ( in V) NA - Number of Output Phase for AC Power NA Single Phase, Three Phase, Both Single and 2/5 Supply three Phase, NA Readback Accuracy for AC Power Supply (Current) NA - Setup Resolution for AC Power Supply (Voltage) ( in mV) NA - AC Output Power ( in VA) NA - Readback Resolution for AC Power Supply Current (in mA) NA - Accuracy for AC Power Supply Current NA - Waveshape of Output NA - Readback Accuracy for AC Power Supply (Voltage) NA - DC Readback Accuracy for DC Power Supply (Current) 0.084 - Readback Accuracy for DC Power Supply (Voltage) 0.04 - Output Current Range For DC Power Supply ( in A) 0-42 - Readback Resolution for DC Power Supply and Current (in mA) 5.04 - Setup Resolution for DC Power Supply (Current) (in mA) 5.04 - DC Output Power ( in Watt) 1700 - Readback Resolution for DC Power Supply (Voltage) ( in mV) 4.8 - Output Voltage Range For DC Power Supply ( in V) 0-40V - Ac acuracy for DC Power Supply Voltage 0.04 - Setup Resolution for DC Power Supply Voltage( in mV) 4.8 - Accuracy for DC Power Supply Current 84 - 3/5 CERTIFICATIONS Availability of Type tests reports from Central Government lab OR ILAC or their worldwide affiliated recognised labs OR NABL approved lab showing confirmity to the specifications Yes - Certificates CSA 22.2 No. 61010-1, 60950-1-07 and UL61010-1, UL60950-1-(2nd Ed). Marked with cCSAus, CE for EMC & low voltage directive, EN61326-1, EN55022, Class B, FCC Part 15B for conducted emissions, Class A, FCC Part 15A for radiated emissions, EN61000-4 series of standards for immunity - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Devashish Chandra 560017, Hindustan Aeronautics Limited Overhaul Division Vimanapura Post Bangalore 5 45 EMD Required No ePBG Required No
high performance power supplies High Performance Power Supplies ( 5 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Power Supply Type Benchtop DC AC, DC, AC + DC, Benchtop DC Number Of Outputs 1 1, 2, 3 Output Voltage Single Value - Output Current Single Value - Warranty (Year) >/=1 Year - CONSTRUCTIONAL Dimensions (in mm) 140 x 160 x 320 mm - Input and Output Interfaces NA - Accessories to be Supplied None - Weight (Kg) 3.6 Kg - FUNCTIONAL Line Regulation ( in percentage ) 0.01% of FSV - Input for Power Supply 230V ±10%, 50Hz - Display and Control Features V, I, protection limits, and fault status indicators - Multiple Steps to cover the voltage and Current Ranges Yes - Output Ripple and Ripple: 2 mVrms Noise: - 1/5 Noise and Maximum ( in mV rms) 20 mVp-p Total Harmonic Distortion (THD) NA - Operating Temperature Range (Degree Celcius ) 5°C to 40°C - Meter Two, Independent 3-digit numeric LED display, and LED fault indicators - Protection Output short circuit, Output Over Current - Efficiency ( in percentage) NA - Programmable Output Frequency Minimum (in Hz) NA - Programmable Output Frequency Resolution ( in Hz) NA - Power Factor NA - Transient Response (in microSec) 200 µS - Operating Humidity Range ( in percentage) 20% - 80% RH (non condensing) - Load Regulation ( in percentage ) 0.01% of FSV - AC Setup Resolution for AC Power Supply (Current) ( in mA) NA - Programmable Output Frequency Maximum ( in Hz) NA - Output Current Range For AC Power Supply ( in A) NA - Accuracy for AC Power Supply (Voltage) NA - Readback Resolution for AC Power Supply (Voltage) (in mV) NA - Output Voltage Range For AC Power Supply ( in V) NA - Number of Output Phase for AC Power Supply NA Single Phase, Three Phase, Both Single and three Phase, NA 2/5 Readback Accuracy for AC Power Supply (Current) NA - Setup Resolution for AC Power Supply (Voltage) ( in mV) NA - AC Output Power ( in VA) NA - Readback Resolution for AC Power Supply Current (in mA) NA - Accuracy for AC Power Supply Current NA - Waveshape of Output DC - Readback Accuracy for AC Power Supply (Voltage) NA - DC Readback Accuracy for DC Power Supply (Current) 0.6% ± 3 digits - Readback Accuracy for DC Power Supply (Voltage) 0.3% ± 3 digits - Output Current Range For DC Power Supply ( in A) 0-10 A - Readback Resolution for DC Power Supply and Current (in mA) 10 mA - Setup Resolution for DC Power Supply (Current) (in mA) 10 mA - DC Output Power ( in Watt) 420 Watt - Readback Resolution for DC Power Supply (Voltage) ( in mV) 10 mV - Output Voltage Range For DC Power Supply ( in V) 0-42V - Ac acuracy for DC Power Supply Voltage 0.3% ± 3 digits - Setup Resolution for DC Power Supply Voltage( in mV) 10 - Accuracy for DC Power Supply Current 0.6% ± 3 digits - 3/5 CERTIFICATIONS Availability of Type tests reports from Central Government lab OR ILAC or their worldwide affiliated recognised labs OR NABL approved lab showing confirmity to the specifications No - Certificates CE-marked to: EN61010-1 and EN61326 - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Devashish Chandra 560017, Hindustan Aeronautics Limited Overhaul Division Vimanapura Post Bangalore 5 45 EMD Required No ePBG Required No
Light Emitting Diode LED Fixture- LED tube light Light Emitting Diode LED Fixture- LED Tube Light ( 300 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Led tube light power rating corresponding Min Luminious flux 20 Watt/2000 lumen 18 Watt/1800 lumen, 20 Watt/2000 lumen, 22 Watt/2200 lumen Colour Temperature (K) 6500 6500 Warranty for free replacement (Years) 2 years 2years CONSTRUCTIONAL Type of Tube Light Cap G-13 Bi-pin - Ingress Protection in IP IP 20 - Lamp Shell material Polycarbonate polycarbonate LED Fixture With Al back, front with polycarbonate/Acrylic diffuser more than 85%efficiency of lig With - Light Source SMD LED Chip - LED Make Havella - Length of tube light (Nominal) (in mm) 1220 - FUNCTIONAL LED lamp efficacy (Lm/W) 100 - Colour Rendering Inde (CRI) >/= 80 - 1/3 Total Harmonics (%) </= 15% - LED Tubelight Life of 25000 hours predicted as per TM21 Report on Data obtained as per test conducted for 6000 hours as per LM80 Yes - Temperature Cycling test and supply voltage switching test (1) product shall be subjected to minus 10 degree C for 1 hour then switch to 50 degree C for 1 hour in total 5 cycles (2)30 sec ON and 30 sec Off At the end of test as per (1) and (2) no visual damage shall be observed and light should alight for more than 15 min after the test Yes - Beam Angle (Degree) >/= 120 degree - Operating Voltage range (Volt) 100-300 - Driver Efficiency (%) more than 85% - Surge Voltage withstand (KV) 2.5 KV - LED Chip Efficacy (Lm/W) 130 - Rated Voltage for Performance and life (Volt) 220-240 - Lumen Maintenance at 25 deg;C after 6000 hrs (%) 80% - LED Chip Wattage (Individual) (Watt) 0, 25 - Power Factor >/= 0.9 - CERTIFICATIONS BIS Registration certificate under (CRS) number and date R-84000019 20.06.2017 - Certificare for Luminaire photometric data as per LM79 Yes - Certificate No and Date of Luminaire RET 0020 13.06.2017 - 2/3 photometric data as per LM 79 report Compulsory Registration and CRS of BIS for safety to IS 16102-I Yes - EMC Test Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Venugopal Punniyakotti 421502, NEAR MPF MAIN GATE, OPP. PUMP HOUSE, ORDNANCE ESTATE, AMBARNATH (W) 300 30 EMD Required No ePBG Required No
high performance power supplies High Performance Power Supplies ( 5 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Power Supply Type Benchtop DC AC, DC, AC + DC, Benchtop DC Number Of Outputs 1 1, 2, 3 Output Voltage Single Value - Output Current Single Value - Warranty (Year) >/=1 Year - CONSTRUCTIONAL Dimensions (in mm) 160 x 140 x 320 mm - Input and Output Interfaces NA - Accessories to be Supplied None - Weight (Kg) 2.8 Kg - FUNCTIONAL Line Regulation ( in percentage ) 0.01% of FSV - Input for Power Supply 230V ±10%, 50Hz - Display and Control Features V, I, protection limits, and fault status indicators - Multiple Steps to cover the voltage and Current Ranges Yes - Output Ripple and Ripple: 2 mVrms Noise: - 1/5 Noise and Maximum ( in mV rms) 10 mVp-p Total Harmonic Distortion (THD) NA - Operating Temperature Range (Degree Celcius ) 5°C to 40°C - Meter Two, Independent 3-digit numeric LED display, and LED fault indicators - Protection Output short circuit, Output Over Current - Efficiency ( in percentage) NA - Programmable Output Frequency Minimum (in Hz) NA - Programmable Output Frequency Resolution ( in Hz) NA - Power Factor NA - Transient Response (in microSec) 200 µS - Operating Humidity Range ( in percentage) 20% - 80% RH (non condensing) - Load Regulation ( in percentage ) 0.01% of FSV - AC Setup Resolution for AC Power Supply (Current) ( in mA) NA - Programmable Output Frequency Maximum ( in Hz) NA - Output Current Range For AC Power Supply ( in A) NA - Accuracy for AC Power Supply (Voltage) NA - Readback Resolution for AC Power Supply (Voltage) (in mV) NA - Output Voltage Range For AC Power Supply ( in V) NA - Number of Output Phase for AC Power Supply NA Single Phase, Three Phase, Both Single and three Phase, NA 2/5 Readback Accuracy for AC Power Supply (Current) NA - Setup Resolution for AC Power Supply (Voltage) ( in mV) NA - AC Output Power ( in VA) NA - Readback Resolution for AC Power Supply Current (in mA) NA - Accuracy for AC Power Supply Current NA - Waveshape of Output DC - Readback Accuracy for AC Power Supply (Voltage) NA - DC Readback Accuracy for DC Power Supply (Current) 0.6% ± 1 digit - Readback Accuracy for DC Power Supply (Voltage) 0.3% ± 1 digit - Output Current Range For DC Power Supply ( in A) 0-5 A - Readback Resolution for DC Power Supply and Current (in mA) 10 mA - Setup Resolution for DC Power Supply (Current) (in mA) 10 mA - DC Output Power ( in Watt) 175 Watt - Readback Resolution for DC Power Supply (Voltage) ( in mV) 100 - Output Voltage Range For DC Power Supply ( in V) 0-35V - Ac acuracy for DC Power Supply Voltage 0.3% ± 1 digit - Setup Resolution for DC Power Supply Voltage( in mV) 100 - Accuracy for DC Power Supply Current 0.6% ± 1 digit - 3/5 CERTIFICATIONS Availability of Type tests reports from Central Government lab OR ILAC or their worldwide affiliated recognised labs OR NABL approved lab showing confirmity to the specifications No - Certificates CE-marked to: EN61010-1 and EN61326 - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Devashish Chandra 560017, Hindustan Aeronautics Limited Overhaul Division Vimanapura Post Bangalore 5 45 EMD Required No ePBG Required No
Multifunction Machines
Multifunction Machines
Potable water purification system Potable Water Purification System ( 10 ) Technical Specifications Specification Specification Name Values Allowed Values EQUIPMENT TYPE & FEATURES Type Electrically Operated Reverse Osmosis based water purifier Electrically Operated Reverse Osmosis based water purifier Ultraviolet (UV) LAMP Yes Yes Ultra Voilet (UV) Lamp power consumption 11 - STANDARDS Conformity to Indian Standrad for System IS 14724 (latest) for water purification system with Ultraviolet disinfection - Number of float valves/sensors 1 1, 5 INPUT PARAMETERS Input Water TDS 1000 1000 OUTPUT PARAMETERS Recovery at 27 degree Centigrade 25-35 30-40, 25-35 Output Water of RO system Conforming to Indian Standard IS 10500(latest) - Output water capacity (Litre/Hour): 50 50 Arsenic and Floride removal capability true 1/3 Misc, warranty etc Thin-film composite membrane Yes Yes High Pressure Pump Yes - Raw water/Chemical Raw water/Chemical Cleaning PUMP Yes Yes Pre Filter Vessels: Yes Yes Micron Filter Yes Yes Membrane Housing Yes Yes Auto cut Yes Yes No of candles (Nos) 3 3 Installation Type Wall mounted Wall mounted Warranty period ( for free replacement of machine 2 2.0 Warranty Period (for scope including free of cost candle and activated carbon onsite replacement twice a year) 2 2.0 Antiscalant- where silica is up to 100 ppm/where Mica is up to 100 ppm Yes Yes Chloride & Flouride removal facility Yes with Pump Yes with Pump Test Report Availability of type test report(Design Evalution Reports) as per IS:14724 and IS 10500 Yes - Test certificate No and date: - - Name and Address of laboratory which conducted Test: - - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Omendra Singh 227412, HAL AVIONICS DIVISION KORWA PO-HAL KORWA AMETHI-227412 UP 10 30 EMD 2/3 Required No ePBG Required No
Cables suitable for CCTV System (Accessories) Cables Suitable For CCTV System (Accessories) ( 6100 ) Technical Specifications Specification Specification Name Values Allowed Values Cables suitable for CCTV System (Accessories) Cable Classification Cat-6 UTP Cat-6 UTP Armoured Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Sukesh Gehlaut 208009, FIELD GUN FACTORY KALPI ROAD KANPUR 6100 15 EMD Required No ePBG Required No
Printer
Air Conditioner
Televisions
Televisions
Multifunction Machines
miniature circuit breakers Miniature Circuit Breakers ( 100 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Governing Indian Standard specification IS/IEC 60898-1:2002 Yes - Rated Current (Ampere) 63 A 0.5 a, 1.0 a, 2.0 a, 3.0A, 4.0, 5.0A, 6 A, 10 A, 16 A, 20 A, 25 A, 32 A, 40 A, 63 A Instantaneous Tripping Range C B, C Rated Voltage (Volt) 240 VOLT 240 VOLT, 415 VOLT No of poles/Protected poles(PP) 1pole with 1PP 1pole with 1PP, 2 pole with 1PP, 2 pole with 2 PP, 3pole with 3PP, 4 pole with 3PP ISI marking Yes - CM/L No: 8515376 - CM/L Validity up to 13/11/2018 - CONSTRUCTIONAL Steel sheet enclosure for MCB of 1.2 mm thickness duly pretreated stove enamelled/powder coated Without - Rated Short circuit 10000 A - 1/3 capacity (Ampere) CERTIFICATIONS Availability of Type test report from Central government/NABL/ILAC accridiated laoratory to prove conformity to the specification for each rating. yes - Test Report number 042582 - Date of issue of Test Report by Laboratory 12/02/2016 - Test Report to be furnished to the buyer on demand Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 praveen kumar 803121, rajgir nalanda pin 803116 100 15 EMD Required No ePBG Required No
miniature circuit breakers Miniature Circuit Breakers ( 100 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Governing Indian Standard specification IS/IEC 60898-1:2002 Yes - Rated Current (Ampere) 16 A 0.5 a, 1.0 a, 2.0 a, 3.0A, 4.0, 5.0A, 6 A, 10 A, 16 A, 20 A, 25 A, 32 A, 40 A, 63 A Instantaneous Tripping Range C B, C Rated Voltage (Volt) 240 VOLT 240 VOLT, 415 VOLT No of poles/Protected poles(PP) 1pole with 1PP 1pole with 1PP, 2 pole with 1PP, 2 pole with 2 PP, 3pole with 3PP, 4 pole with 3PP ISI marking Yes - CM/L No: 8515376 - CM/L Validity up to 13/11/2018 - CONSTRUCTIONAL Steel sheet enclosure for MCB of 1.2 mm thickness duly pretreated stove enamelled/powder coated Without - Rated Short circuit 10000 A - 1/3 capacity (Ampere) CERTIFICATIONS Availability of Type test report from Central government/NABL/ILAC accridiated laoratory to prove conformity to the specification for each rating. yes - Test Report number 042582 - Date of issue of Test Report by Laboratory 12/02/2016 - Test Report to be furnished to the buyer on demand Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 praveen kumar 803121, rajgir nalanda pin 803116 100 15 EMD Required No ePBG Required No
miniature circuit breakers Miniature Circuit Breakers ( 100 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Governing Indian Standard specification IS/IEC 60898-1:2002 Yes - Rated Current (Ampere) 32 A 0.5 a, 1.0 a, 2.0 a, 3.0A, 4.0, 5.0A, 6 A, 10 A, 16 A, 20 A, 25 A, 32 A, 40 A, 63 A Instantaneous Tripping Range C B, C Rated Voltage (Volt) 240 VOLT 240 VOLT, 415 VOLT No of poles/Protected poles(PP) 1pole with 1PP 1pole with 1PP, 2 pole with 1PP, 2 pole with 2 PP, 3pole with 3PP, 4 pole with 3PP ISI marking Yes - CM/L No: 8515376 - CM/L Validity up to 13/11/2018 - CONSTRUCTIONAL Steel sheet enclosure for MCB of 1.2 mm thickness duly pretreated stove enamelled/powder coated Without - Rated Short circuit 10000 A - 1/3 capacity (Ampere) CERTIFICATIONS Availability of Type test report from Central government/NABL/ILAC accridiated laoratory to prove conformity to the specification for each rating. yes - Test Report number 042582 - Date of issue of Test Report by Laboratory 12/02/2016 - Test Report to be furnished to the buyer on demand Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 praveen kumar 803121, rajgir nalanda pin 803116 100 15 EMD Required No ePBG Required No
miniature circuit breakers Miniature Circuit Breakers ( 100 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Governing Indian Standard specification IS/IEC 60898-1:2002 Yes - Rated Current (Ampere) 10 A 0.5 a, 1.0 a, 2.0 a, 3.0A, 4.0, 5.0A, 6 A, 10 A, 16 A, 20 A, 25 A, 32 A, 40 A, 63 A Instantaneous Tripping Range C B, C Rated Voltage (Volt) 240 VOLT 240 VOLT, 415 VOLT No of poles/Protected poles(PP) 1pole with 1PP 1pole with 1PP, 2 pole with 1PP, 2 pole with 2 PP, 3pole with 3PP, 4 pole with 3PP ISI marking Yes - CM/L No: 8515376 - CM/L Validity up to 13/11/2018 - CONSTRUCTIONAL Steel sheet enclosure for MCB of 1.2 mm thickness duly pretreated stove enamelled/powder coated Without - Rated Short circuit 10000 A - 1/3 capacity (Ampere) CERTIFICATIONS Availability of Type test report from Central government/NABL/ILAC accridiated laoratory to prove conformity to the specification for each rating. yes - Test Report number 042582 - Date of issue of Test Report by Laboratory 12/02/2016 - Test Report to be furnished to the buyer on demand Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 praveen kumar 803121, rajgir nalanda pin 803116 100 15 EMD Required No ePBG Required No
Light Emitting Diode LED Fixture- LED tube light Light Emitting Diode LED Fixture- LED Tube Light ( 3000 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Led tube light power rating corresponding Min Luminious flux 20 Watt/2000 lumen 18 Watt/1800 lumen, 20 Watt/2000 lumen, 22 Watt/2200 lumen Colour Temperature (K) 5700 2700, 4000, 5700, 6500 Warranty for free replacement (Years) 3 years 3 years, 2 years CONSTRUCTIONAL Type of Tube Light Cap G-13 Bi-pin - Ingress Protection in IP IP 20 - Lamp Shell material Polycarbonate Polycarbonate LED Fixture With Al back, front with polycarbonate/Acrylic diffuser more than 85%efficiency of lig With - Light Source SMD LED Chip - Length of tube light (Nominal) (in mm) 1220 - FUNCTIONAL LED lamp efficacy (Lm/W) 100 - Colour Rendering Inde (CRI) >/= 80 - Total Harmonics (%) </= 15% - 1/3 LED Tubelight Life of 25000 hours predicted as per TM21 Report on Data obtained as per test conducted for 6000 hours as per LM80 Yes - Temperature Cycling test and supply voltage switching test (1) product shall be subjected to minus 10 degree C for 1 hour then switch to 50 degree C for 1 hour in total 5 cycles (2)30 sec ON and 30 sec Off At the end of test as per (1) and (2) no visual damage shall be observed and light should alight for more than 15 min after the test Yes - Beam Angle (Degree) >/= 120 degree - Operating Voltage range (Volt) 100-300 - Driver Efficiency (%) more than 85% - Surge Voltage withstand (KV) 2.5 KV - LED Chip Efficacy (Lm/W) 130 - Rated Voltage for Performance and life (Volt) 220-240 - Lumen Maintenance at 25 deg;C after 6000 hrs (%) 80% - LED Chip Wattage (Individual) (Watt) 0, 25 - Power Factor >/= 0.9 - CERTIFICATIONS Certificare for Luminaire photometric data as per LM79 Yes - Compulsory Registration and CRS of BIS for safety to IS 16102-I Yes - EMC Test Yes - * Bold specifications are the golden parameters. 2/3 Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Vijaykumar Iyer 421502, Ordnance Factory Ambernath Ambernath, Thane 421502 3000 15 EMD Required No ePBG Required No
Plastic Body Evaporative Coolers-DESERT COOLER Plastic Body Evaporative Coolers-DESERT COOLER ( 4 ) Technical Specifications Specification Specification Name Values Allowed Values * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 praveen kumar 803121, rajgir nalanda pin 803116 4 15 EMD Required No ePBG Required No
Computer Paper
Steel Filing Cabinets
Printer or photo Copier Paper Printer Or Photo Copier Paper ( 2000 ) Technical Specifications Specification Specification Name Values Allowed Values Certification Conforming to Indian Standard IS 14490 : Latest Yes - Test Method as per IS: 1060 Yes - Size Size and Dimension of The Paper (W X L) in mm 210 x 297 210 x 297 Size of the Paper A4 A4 GSM of Paper 80 80 Quantity Number of Sheets per Ream 500 500 Physical Characteristics Brightness in % 85 Tensile Index MD in Nm/g 42 - Tensile Index CD in Nm/g 28 - Opacity in % 85 - Tear Index (Avg) in Nm.m²/g 4.6 - Smoothness for both sides (Bendtsen) in ml/min 180 - 1/2 Thickness in µm 96 - Moisture in % 4.1 - Stiffness MD 2.1 - Stiffness CD 1 - Surface Strength Dennison (Wax Pick) >= 12 A 12A - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 zzz zzz 500058, PO: KANCHANBAGH 2000 15 EMD Advisory Bank HDFC Bank EMD Percentage(%) 3.55 EMD Amount 8520 ePBG Required No
bathing soap Bathing Soap ( 26855 ) Technical Specifications Specification Specification Name Values Allowed Values Certification Conforming to Indian Standard IS 13498:Latest Yes - BIS Marking true CML Number 1 - Test Report Details Availability of Test Report from Central Govt./NABL/ILAC accredited lab to prove conformity to specification Yes Yes, No Test Report Number 1300486 - Test Report Date 12/04/2016 - Name of the Lab Hamam - Must declare (Write NA in case of NO against availability of Test Report) Yes - Colour and Fragrance Colour Green - Fragrance Nib - Weight Weight of Soap (Gms) 100 Packing Packing Material Plastic 1/2 Number of Soaps in a Pack (Nos) 1 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Raj Kishore 600054, JOINT GENERAL MANAGER, GS & TOOLS SECTION, HEAVY VEHICLES FACTORY, AVADI 26855 15 EMD Required No ePBG Required No
Line Intractive UPS with AVR Line Intractive UPS With AVR ( 96 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Rating in KVA/min VAH capacity of battery (KVA/VAH) 0.5/84 0.5/84, 0.5/168, 0.5/400, 0.65/168, 0.65/400, 0.65 108, 0.8/168, 0.8/400, 0. 8/216, 1.0/168, 1.0/400, 1.0/216, 1.0/800, 1.5/80 0, 1.5/600, 2.0/800, 2.0/1 600 Technology MOSFET-PWM MOSFET-PWM, IGBT- PWM Type of battery SMF-VRLA confirming to JISC-8702 Pt 1, 2 &3 SMF-VRLA confirming to JISC-8702 Pt 1, 2 &3 Rated Output (Volt) Single phase sinewave 230v AC, 50Hz Single phase sinewave 230v AC, 50Hz, Single Phase Quasi-Sin-wave 230 V AC, 50 Hz Degree of protection IP-21 IP-21, IP 20 Inverter Efficiency (%) >/= 60% >/= 60%, >/= 70% Warranty for the battery from the date of delivery 1 year - Warranty for Line Interactive UPS 2 Years 1 Year, 2 Years, 5 Years Installation and commissioning Yes - 1/4 instructions CONSTRUCTIONAL Type of enclosure ABS - AC out put for printer (not through inverter) Yes Yes, No Inverter out put socket AC out put for printer (not through inverter) 3 Three pin 2 Three pin, 3 Three pin, Hard wiring, Not applicable FUNCTIONAL Total harmonic distorsion (%) </= 40% - Input (Volt) Single phase sinewave(160-280v) - Switching over time (Mili sec) Maximum 10 milli seconds - Overload Time (Minutes) >/= 10 minutes - Load power factor >/= 0.6 - Variation in AVR output in AC mode (%) AVR (Voltage regulation) output voltage in AC Mode 230 Volts +/-9%, 50 +/-3 Hz - Overload (%) - - Variation in output voltage in battery mode (%) (UPS output voltage in battery mode) 230 Volts +/- 10% - Variation on output frequency in battery mode (Hz) </=0.5 - PROTECTION Protection against (over discharge) discharge per 12v battery (Volt) 10.5 - Protection for outside input voltage range: If Input voltage goes outside the range 160 to 280 Volts, the system shall switch over to battery mode Yes - Protection against short circuit of UPS Yes - Protection for over voltage and over load Yes - REPORTS AND Damp heat Test at 45 Yes - 2/4 CERTIFICATIONS degree, RH -95% for 2-cycle as per IS:9000 pt-5/sec-1 Dry heat Test at 45 degree for 16 Hrs as per IS:9000 pt-3/sec-5 Yes - Cold Test as per IS:9000 pt-2/sec-4 Yes - Availability of the type test report from central Govt./NABL/ILAC Accredited Lab Yes - Type Test certificate no. and date R-41015563 03-12-2015 - Name Of Lab Delhi Test House - Address of Lab A-62/3, Industrial Area, Opposite Hans, Azadpur, Delhi - 110033 - As per Meity (Government of India) guidelines UPS shall have valid BIS CRS certifications as applicable Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Raj Kishore 600054, JOINT GENERAL MANAGER, GS & TOOLS SECTION, HEAVY VEHICLES FACTORY, AVADI 96 90 EMD Required No ePBG Required No
LED Luminaire (For Road and Street Lights) LED Luminaire (For Road And Street Lights) ( 500 ) Technical Specifications Specification Specification Name Values Allowed Values STANDARDS LED Luminaire conformity to IS:10322/Part 5/Section 3/2012 latest and IS: 16107 (Part 2/Sec 1):2012 latest Yes - Photo biological safety of LEDs used shall be as per IS:16108/2012 (exempt group) Yes - Types of LED Luminaire as per the IS: 16107(Part-2 Sec.-1)/2012 Type B - Types of LED Modules as per the IS:IS: 16103(Part-2)/2012 Type 3 - LED Rating (in Watts)/System Wattage/Rated Power 60W 60W Luminaire System Efficacy (Lumen/watt) >/= 100 Lm/Watt - Ingress Protection (IP Rating) as per IS:10322 (Part 1):1982 latest IP66 - 1/7 Warranty for free replacement (in years) 2 2 ELECTRICAL EFFICIENCY Input operating Voltage range and frequency 140 to 270 V olts AC at 50 Hz+/-2 with auto cutt off at below 120V - Automatic Higher Cut off voltage above 300 volt Yes - Rated voltage 230 V AC 50 Hz - AC Power Factor at full load ≥ 0.95 - Driver Efficiency (in %age) Upto 100W: ≥85%, Above 100W: >/=90% Yes - Total Harmonics Distortion ≤ 10 - "The total circuit power shall not be more than 110 percent of the value declared by the manufacturer (as per Cl. 8 of IS:16104:2012 lates)" Yes - OPTICAL LED chip Efficacy ≥130 Lm/Watt - Colour temperature 6000+/-500K - Working life for LED (Minimum 50, 000 burning hours as per LM-80 and LM 21 reports) Yes - Colour Rendering Index(CRI) ≥70 - LED Beam Angle ≥120 - Optic lense materal (UV stabilised) Poly carbonate lense - THERMAL MANAGEMENT Heat sink should be die- cast aluminium along with sufficient heat sink fins to dissipate heat effectively Yes - Junctiojn/Soldering point temperature shall not exceed 85 deg.c as per LM 80 report Yes - Capacitor shall be rated for a temperature of 105 deg. celsius or Yes - 2/7 better Operating temperature range -10 deg C to +50 deg C -10 deg C to +50 deg C Operating Humidity Range 10 % to 95% RH - PROTECTION Short circuit Protection Yes - Over load protecton Yes - Over Voltage protection Yes - Reverse polarity Yes - High voltage test (1.5 KV for one minute between supply terminals and body of the unit) Yes - Insulation resistance between earth and current carrying part >100 M Ohm - The luminaire shall be protected against surges and transients ( Internal) >/=5KV - The luminaire shall be protected against surges and transients of >/=10KV (External) Yes - CONSTRUCTIONAL The Luminaires casing/housing (single piece housing) shall be pressure die casted aluminium alloy with higher thermal conductivity Yes - The luminaire body must be corrosion resistant powder coated Yes - All fastners must be of stainless steel Yes - Protection of the entire housing (both LED section and driver section) as per IS:10322 (Part 1):1982 latest IP66 - Extruded silicon loop gasket shall be provided in the lantern body to ensure a weather proof seal Yes - 3/7 between the UV Glass cover and the metal housing to exclude the entry of the dust, water, insects etc., Luminaries light transparency should be of Toughened glass Yes - Toughned transparent glass cover thickness >/=4 mm - Toughned Glass shall not get discoloured shall not suffer degration due to heat and ageing within warranty period Yes - Number of electronic control gear (power supplies) 1 No. 1 No., 2 Nos., 3 Nos., 4 Nos. Light Source SMD LED Chip as per LM 80/IS16106 - Driver components shall be industrial grade or above Yes - PCB shall be FR4 grade minimum 0.8 to 1.0 mm thick or more Yes - The Luminaires works on single phase three wires system (Phase, Neutral and Earth) Yes - Suitable connector shall be provided for LED connection between driver output and LED Yes - Length of ISI marked three core wire (shall be provided along with supply of material) 50 cm 50 cm, 100 cm MARKING "Manufactures Name and and brand on the aluminium die cast body " Engraved/Embossed - Manufacturer’s name, model number, serial number Yes - Date of manufacture (month-year), and lot Yes - 4/7 number as identification mark inside each unit and the outside of each packaging box The operation characteristics voltage and power be marked inside of each LED luminaire unit Yes - Diameter of pole Luminiare suitable for: (upto 45W Pole OD: shall be 40mm), (>45W<120W Pole OD: Shall be 50 mm), (above 120W: OD shall be 60 mm for which luminiare is suitable Yes - REPORTS AND CERTIFICATIONS LED Make OSRAM/NICHIA/CREE SAMSUNG/SEOUL LUMILEDS/PHILIPS SYSKA/LUMENMAX EVERLIGHT/EDISON BRIDGELUX NATIONSTAR/REFOND - System must have EMI/EMC compliance as applicable (Test reports shall be furnish to the buyer/consignee on demand) Yes - LM 79 (Photometry) (Ref.IS:16106:2012) report from Central Government Lab NABL/ILAC accrediated lab. Reports shall be furnish to the buyer consignee on demand (LM-79 report shall have total lumen output, power, PF, Current in Amps, CRI & CCT etc., ) Yes - LM 80 & TM 21 (Ref. IS:16105:2012) Report and Photo biological report for LED report from Central Government Lab NABL/ILAC accrediated lab. Reports shall be furnish to the buyer Yes - 5/7 consignee on demand (LM-80 report shall have the Pohoto Biological report of the LED Chip being used in the luminaire) Availability of test Report from Central Government Lab NABL/ILAC accrediated lab to Indian Standrad IS:10322/part 5/sec-3/2012 and IS 16107 (Part 2/Sec 1) : 2012 Yes - Seller shall furnish the Type test reports to the buyer/consignee on demand Yes - DC or AC supplied electronic control gear for LED Module shall comlpy as per IS:15885 (Part 2/Sec.13) Yes - LED Luminaire for road and street lighting shall comply with Complusory Registration(CRS) of BIS for safety as per IS 10322 (Part 5/Section 3): 2012 as applicable on date Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Arpit Chugh 201206, ORDNANCE FACTORY MURADNAGAR DISTT. GHAZIABAD 500 15 EMD Required No ePBG Required No
Modular Work Stations/Modular Staff Office Packages Average Turn Over of Last 3 Years 2500000 Lakh (s) Experience with Gov. Required 5 Year (s) Modular Work Stations/Modular Staff Office Packages ( 6 ) Technical Specifications Specification Specification Name Values Allowed Values SELLING UNIT Selling unit Order Quantity is number of Pieces Clusters of specified number of seats. (Price given is for full cluster module and not per seat) Order Quantity is number of Pieces Clusters of specified number of seats. (Price given is for full cluster module and not per seat) GENERIC Type of system Hybrid panel based system (combination of sliding & snap fit tiles) Tile based system (shape fit tiles), Hybrid panel based system (combination of sliding & snap fit tiles), Desk band system Type/Shape of cluster Single Seater L Shape Cluster Single Seater L Shape Cluster, Single Seater Rectangular Cluster, Double Seater C shape Cluster with Curvilinear Top, Double Seater T shape Cluster with Curvilinear Top, Double Seater Rectangular shape Cluster with Side By 1/7 Side sitting, Double Seater Rectangular shape Cluster with Back to Back sitting, Four Seater H Shape Cluster with Curvilenear Top, Four Seater Plus Shape Cluster with Curvilenear Top, Four Seater Rectangular Cluster with Straight Line Side by Side Sitting, Four Seater Rectangular Cluster with 2 X 2 Opposite Sitting Wire Management for electric switch Skirting race-way - Foot edge of table top Flat with PVC lipping - Plain edge banded with 2mm PVC tape - Construction of drawer unit Wooden front with PVC lipping Flat metal front, Wooden front with PVC lipping, Wooden front post form, All wood pedestal, Full Metal, Wooden front with teak wood lipping Construction of pedestal Free standing full height with castor Top supporting, Free standing full height with castor, free standing low height with castor Type of pedestal two drawer and one filer - Locking system of pedestal Center locking - Work top support Gable end made of prelaminated particle board Gable end made of prelaminated particle board, M S leg, Commercial Block Board BWP grade, Decorative Block Board BWP grade, Commercial Block Board MR Grade, Decorative Block Board MR Grade Type of Drawer unit Moveable with castor whees - MATERIAL Frame material for work station Powder Coated Extruded Aluminium Powder coated CRCA hollow system, MDF 2/7 Sections plus Paper Honeycomb Blocks And Welded Steel Structured Bottom Frame With Aluminium Extrusion, Alluminium Alloy, Powder Coated Extruded Aluminium Sections, Commercial Block Board BWP grade Conforming to IS 1659, Decorative Block Board BWP grade Conforming to IS 1659, Commercial Block Board MR Grade Conforming to IS 1659, Decorative Block Board MR Grade Conforming to IS 1659, Teak wood, Teak carved wood, Other wood Material of table top Prelaminated particle board Prelaminated particle board, MDF board, E-1 grade green board, Other wood Material of tiles for top laminate Fabric tackable-fabric upholstered metal tile with PE foam, fabric magnetic - fabric upholstered metal tile, white board made of decorative laminate with white glossy, high pressure laminate, laminate, glass writing board plus back painted sandwich glass tiles, fabric tackable plus fabric magnetic plus white board, fabric 3/7 tackable plus fabric magnetic plus glass writing board Material of intermediate tiles laminate laminated block - 38mm thick paper honeycomb plus 3mm mdf on each side plus decorative laminate, fabric tackable - fabric upholstered metal tile with PE foam, fabric magnetic fabric upholstered metal tile, glass writing board - back painted sandwich glass tiles, fabric tackable plus fabric magnetic plus glass writing board, Pre laminated board Material of bottom tiles prelaminated particle board tile Material tile powder coated, prelaminated particle board tile, Commercial Block Board BWP grade tile, Decorative Block Board BWP grade tile, Commercial Block Board MR Grade tile, Decorative Block Board MR Grade tile Overhead Storage Provided No Overhead Storage - DIMENSION Length of table top (main frame) ±10 mm(main frame) 1500 mm 750 mm, 900 mm, 1050 mm, 1200 mm, 1350 mm, 1500 mm, 1650 mm, 1800 mm, 2700 mm, 3600 mm, 2030 mm, 4060 mm, 2400 mm, 4800 mm Length of table top (Return Frame)± 10mm 1500 mm 900 mm, NA FOR RECTANGULAR Depth of table top ± 600 mm 450 mm, 600 mm, 750 4/7 10mm mm Height of table top ±10mm 750 mm - Thickness of table top ±2mm 25 mm - Overall height of work station partition ±10mm 1200 mm 900 mm, 1000 mm, 1100 mm, 1150 mm, 1250 mm, 1300 mm, 1400 mm, 1450 mm, 1550 mm, 1600 mm Thickness of side partition/panel ±2mm 20 mm 23 mm, 50 mm, 70 mm, 15 mm, 20 mm, 30 mm, 35 mm, 40 mm, 45 mm, 55 mm, 60 mm, 65 mm Thickness of main frame ±5 mm 60 mm 50 mm, 25 mm, 65 mm Size of drawer unit ( WidthXDepthXHeigh t) ±10mm 390 X 440 X 147 (mm) 390 X 440 X 147 (mm), 390 X 590 X 147 (mm), 450 X 440 X 147 (mm), 450 X 590 X 147 (mm), NO DRAWER UNIT, 390 x 440 x 160 (mm) Size of file box (Widt hXDepthXHeight) ±10mm 390 X 440 X 296 (mm) 390 X 440 X 296 (mm), 390 X 590 X 296 (mm), 450 X 440 X 296 (mm), 450 X 590 X 296 (mm), NO FILE BOX, 390 x 440 x 260 (mm) FINISH Powder coating thickness of frame 40 micron - CERTIFICATION Test reports to be furnished to buyer on demand YES - BIFMA level-3 YES - OEM of offered product is ISO 9001:2015 certified YES - OEM of offered product is ISO 14001:2015 certified YES - OEM of offered product is ISO 18001:2007 YES - 5/7 certified Green guard certification NO - WARRANTY Warranty period in number of years 2 1, 2, 3, 4, 5 INSTALATION COMMISSIONING INSTALLATION COMMISSIONING The price includes the cost of installation and commissioning of the entire unit at consignee site (excluding the cost of Civil Work which would be got done by the Consignee at his own cost as per design and layout plan provided by the seller). The price includes the cost of installation and commissioning of the entire unit at consignee site (excluding the cost of Civil Work which would be got done by the Consignee at his own cost as per design and layout plan provided by the seller). * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Lalitha V Pillai 411003, CQA (Ammunition) Khadki, Pune 6 15 EMD Required No ePBG Required No
End point protection software/appliances End Point Protection Software/Appliances ( 30 ) Technical Specifications Specification Specification Name Values Allowed Values BASIC INFORMATION OF END POINT PROTECTION SOFTWARE(GOLDEN) Category Software Software, Appliance Software/Appliance Type Subscription Subscription, Perpetual Name of Software EPS 7.2 BUSINESS STANDARD 3 YEAR LICENSE 05-50 EACH USER - OEM Model/Part NO. 7.2 (2018) - Software/Appliance Version 7.2 (2018) - Date of Launch of Version 2018 - FEATURES AND FUNCTIONALITY PARAMETERS(GOLDEN) Mobile Endpoints Security false Global Threat Intelligence support false Advanced Protection for Virtual Environments false Signature based Protection true Data Protection Full disk and file Encryption false 1/4 Data Loss Prevention (DLP/IDLP) capability false Storage Security false Data backup/Data recovery false Cloud-Assisted Security Network false No. of days Training provided at site upto 5 0, upto 5, 6 to 10, 11 to 20, 21 to 30 Number of Years upto which support (warranty) is available from OEM Franchise online 3 0, 1, 2, 3, 5 FEATURES AND FUNCTIONALITY PARAMETERS(GENERIC) Anti-virus feature true - Anti-malware feature true - Anti-phishing feature true - Anti ransom ware true - Personal Firewall true - Network Attack Blocker true - Web Control/URL filtering true - Host - based Intrusion Detection/Prevention System(HIDS/HIPS/IPS/I DS) true - Host integrity true - Application Control false - Device Control true - USB Device Control true - Vulnerability asessment and patch management false - Deception Technology true - Browser protection true - Anti-theft Protection true - End point forensic true - File server Protection false - System Watcher false - Memory Protection false - Advance machine learning true - 2/4 Content filtering capability false - Auto-Sandboxing capability false - Device Authentication capability false - Centralized Management true - SUPPORTED HARDWARE REQUIREMENTS PARAMETERS Hard Disk Space Required 1 To 2 GB - RAM Size required 512 MB - CPU required 1 to 2 GHZ - Operating Systems supported (Driver) All Operating System - Hyper link compatibility matrix true - GENERIC PARAMETERS OF END POINT PROTECTION SOFTWARE Free Upgradation to Higher Version with in support period yes - Number of user handling capability Above 1000 - Concurrent user handling capability 10000 - Valid Licence copy to be provided YES YES Software supplied through URL Link - Certifications Benchmarking of Software Products yes - Installation and Demonstration true - List of items included in the package LICENSE - Hyper link to Data sheet yes - No of Software Appliances sold 10000.0 - Number of User Referance no. 1 with in Government Department email, phone no. of concerned authority where Software/Appliance installed 100.0 - 3/4 Details of Government Department email, phone no. Of concerned authority where Software/Appliance installed for above Yes it is available - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 praveen kumar 803121, rajgir nalanda pin 803116 30 15 EMD Required No ePBG Required No
End point protection software/appliances End Point Protection Software/Appliances ( 402 ) Technical Specifications Specification Specification Name Values Allowed Values BASIC INFORMATION OF END POINT PROTECTION SOFTWARE(GOLDEN) Category Software Software, Appliance Software/Appliance Type Subscription Subscription, Perpetual Name of Software Kaspersky Endpoint Security for Business - OEM Model/Part NO. KESB- Select - Software/Appliance Version 10.3.0.6294 - Date of Launch of Version 5 Jan 2018 - FEATURES AND FUNCTIONALITY PARAMETERS(GOLDEN) Mobile Endpoints Security true Global Threat Intelligence support true Advanced Protection for Virtual Environments true Signature based Protection true Data Protection Full disk and file Encryption false Data Loss false 1/5 Prevention (DLP/IDLP) capability Storage Security true Data backup/Data recovery false Cloud-Assisted Security Network true No. of days Training provided at site 0 0, upto 5, 6 to 10, 11 to 20, 21 to 30 Number of Years upto which support (warranty) is available from OEM Franchise online 3 0, 1, 2, 3, 5 FEATURES AND FUNCTIONALITY PARAMETERS(GENERIC) Anti-virus feature true - Anti-malware feature true - Anti-phishing feature true - Anti ransom ware true - Personal Firewall true - Network Attack Blocker true - Web Control/URL filtering true - Host - based Intrusion Detection/Prevention System(HIDS/HIPS/IPS/I DS) true - Host integrity true - Application Control true - Device Control true - USB Device Control true - Vulnerability asessment and patch management false - Deception Technology true - Browser protection true - Anti-theft Protection true - End point forensic true - File server Protection true - System Watcher true - Memory Protection true - Advance machine learning true - Content filtering true - 2/5 capability Auto-Sandboxing capability true - Device Authentication capability false - Centralized Management true - SUPPORTED HARDWARE REQUIREMENTS PARAMETERS Hard Disk Space Required 1 GB - RAM Size required 2 GB - CPU required For Client: Intel Pentium 1 GHz or faster, for server: 1Core, 1.4 GHz - Operating Systems supported (Driver) Microsoft Win 10 Pro Enterprise x86/x64 Win 8 & 8.1 Pro Enterprise x86/x64 Win 7 Professional Enterprise/Ultimate x86/x64 SP1 or later - Hyper link compatibility matrix true - GENERIC PARAMETERS OF END POINT PROTECTION SOFTWARE Free Upgradation to Higher Version with in support period yes - Number of user handling capability 10000 - Concurrent user handling capability 10000 - Valid Licence copy to be provided YES YES Software supplied through URL Link - Certifications Benchmarking of Software Products We will provide product license certificate - Installation and Demonstration false - List of items included in the package Yes - Hyper link to Data sheet https:/media.kaspersk y.com/en/business-sec urity/endpoint-core- datasheet.pdf - No of Software Appliances sold 10000 - 3/5 Number of User Referance no. 1 with in Government Department email, phone no. of concerned authority where Software/Appliance installed 750 - Details of Government Department email, phone no. Of concerned authority where Software/Appliance installed for above DRDO Hqr dhawalpand [email protected] 011-23007766 Dhawal Panday - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Padmakar Rustum 421502, MACHINE TOOL PROTOTYPE FACTORY ORDNANCE ESTATE, AMBARNATH 402 60 EMD Required No ePBG Required No
Portable Fire Extinguishers IS 15683 Portable Fire Extinguishers IS 15683 ( 36 ) Technical Specifications Specification Specification Name Values Allowed Values Generic Conformity to Standard IS:15683:2006 With Latest Amdmnt. - Type Stored Pressure Stored Pressure, Gas Cartridge Type Extinguishing Media Carbon Dioxide Based Water Based, Foam Based, Powder Based, Carbon Dioxide Based, Clean Agent Expellant Medium CO2 Extinguishing Medium CO2 Cartridge Based, N2 Based (Stored Pressure), CO2 Extinguishing Medium Constructional Foam Based Extinguishing Media NA - Powder Based Extinguishing Media NA - Clean Agents Based Extinguishing Media NA - Foam Based Fire Extinguisher Capacity(Ltrs) NA 2, 4, 6, 9, NA Powder Based Fire Extinguisher Capacity (Kg) NA 1, 2, NA 1/3 Carbon Dioxide Based Fire Extinguisher Capacity (Kg) 4.5 4.5 Water Based Fire Extinguisher Capacity NA 2, NA Clean Agents Fire Extinguisher Capacity (Kg) NA 2, NA Weight of Filled Portable Fire Extinghuisher (Kg) 17 Rechargebale true - Color Coding Black - Fire Extinguisher Suitable for Class -A Fire false - Fire Extinguisher Suitable for Class -B Fire true - Fire Extinguisher Suitable for Class -C Fire true - Fire Extinguisher Suitable for Class -D Fire false - Fire Extinguisher Suitable for electrical Fire true - Performance Operating Temperature (° C) -10° C to + 55° C - Test pressure/Burst Pressurire Extinguisher except CO2 NA - Test pressure/Burst pressure for CO2 type Extinguisher (write NA if not applicable) 250 Bar - Discharge Range for Extinguisher (Meters) >=1 for Class-B - Effective Discharge Time for Fire Extinguisher, Min (Seconds) 8 Fire Rating for Class -A Fire Extinguisher NA - Fire Rating for Class -B 34B - 2/3 Fire Extinguisher Certification BIS Marking Yes - CM/L No.* with Validity Period 3985085/22-08-2018 - Availability of Test Report from Central Govt./NABL/ILAC accredited lab to prove conformity to specification YES - Test Report No. 539 - Test Report Date 30-01-2018 - Name of the Lab Advance Firetec And Research Lab Pvt Ltd - Address of the Lab B-3, Mangolpuri Indl Area, Phase II, Delhi 110034 - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 ANUBHA AGGARWAL 160002, Plot No 183 Industrial Area Phase 1 Chandigarh 36 15 EMD Required No ePBG Required No
Portable Fire Extinguishers IS 15683 Portable Fire Extinguishers IS 15683 ( 23 ) Technical Specifications Specification Specification Name Values Allowed Values Generic Conformity to Standard IS:15683:2006 With Latest Amdmnt. - Type Gas Cartridge Type Stored Pressure, Gas Cartridge Type Extinguishing Media Water Based Water Based, Foam Based, Powder Based, Carbon Dioxide Based, Clean Agent Expellant Medium CO2 Cartridge Based CO2 Cartridge Based, N2 Based (Stored Pressure), CO2 Extinguishing Medium Constructional Foam Based Extinguishing Media NA - Powder Based Extinguishing Media NA - Clean Agents Based Extinguishing Media NA - Foam Based Fire Extinguisher Capacity(Ltrs) NA 2, 4, 6, 9, NA Powder Based Fire Extinguisher Capacity (Kg) NA 1, 2, NA 1/3 Carbon Dioxide Based Fire Extinguisher Capacity (Kg) NA 2, 3, 4.5, NA Water Based Fire Extinguisher Capacity 9 9 Clean Agents Fire Extinguisher Capacity (Kg) NA 2, NA Weight of Filled Portable Fire Extinghuisher (Kg) 14.0 Rechargebale true - Color Coding Red - Fire Extinguisher Suitable for Class -A Fire true - Fire Extinguisher Suitable for Class -B Fire false - Fire Extinguisher Suitable for Class -C Fire false - Fire Extinguisher Suitable for Class -D Fire false - Fire Extinguisher Suitable for electrical Fire false - Performance Operating Temperature (° C) +5° C to + 55° C - Test pressure/Burst Pressurire Extinguisher except CO2 for water/Foam/Powder type fire extinguisher Test Pressure >=20 Bar, Burst Pressure >=55 Bar - Test pressure/Burst pressure for CO2 type Extinguisher (write NA if not applicable) NA - Discharge Range for Extinguisher (Meters) >=2 for Class-A - Effective Discharge Time for Fire Extinguisher, Min (Seconds) 30 Fire Rating for Class -A Fire Extinguisher 3A - 2/3 Fire Rating for Class -B Fire Extinguisher NA - Certification BIS Marking Yes - CM/L No.* with Validity Period 8200025296 21/11/2017 TO 20/11/2018 - Availability of Test Report from Central Govt./NABL/ILAC accredited lab to prove conformity to specification YES - Test Report No. NTL/CVL/282127003 - Test Report Date 31/10/2017 - Name of the Lab NABL NTL - Address of the Lab DELHI - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 ANUBHA AGGARWAL 160002, Plot No 183 Industrial Area Phase 1 Chandigarh 23 15 EMD Required No ePBG Required No
OEM Cartridge Average Turn Over of Last 3 Years 10 Lakh (s) Experience with Gov. Required 3 Year (s) OEM Cartridge ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values Ungrouped Product Class OEM OEM Brand Canon canon Type of Cartridge Toner Ink, Toner, Drum Ink/Toner/Drum Model number NPG28 - Corresponding Part number/code 28 - Printer Model number/numbers for which Cartridge is suitable Canon iR2420/iR2318 iR2016/iR2422 2020/iR2018 - Yield of the Cartridge as per ISO IEC:19752/2004(E)fo r BK & ISO/IEC:19798 2007(E) for colour (C, M, Y & K individually) (Numbers) 6000 * Bold specifications are the golden parameters. Consignees and Quantity 1/2 S.No. Consignee Address Quantity Delivery Days 1 Bela Sehgal N 110011, Krishna Menon Marg 1 15 EMD Required No ePBG Required No
Air Conditioner
Televisions
telephone instrument single push button Telephone Instrument Single Push Button ( 100 ) Technical Specifications Specification Specification Name Values Allowed Values * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Tirthbasi Barik 700028, Ordnance Factory Dumdum, Jessore Road, Kolkata 100 15 EMD Required No ePBG Required No
Desktops
Multifunction Machines
Printer or photo Copier Paper Printer Or Photo Copier Paper ( 3000 ) Technical Specifications Specification Specification Name Values Allowed Values Certification Conforming to Indian Standard IS 14490 : Latest Yes - Test Method as per IS: 1060 Yes - Size Size and Dimension of The Paper (W X L) in mm 210 x 297 210 x 297, 297 X 420 Size of the Paper A4 a4 GSM of Paper 75 75 Quantity Number of Sheets per Ream 500 500, 500.0 Physical Characteristics Brightness in % 85 Tensile Index MD in Nm/g 40 - Tensile Index CD in Nm/g 25 - Opacity in % 85 - Tear Index (Avg) in Nm.m²/g 4.5 - Smoothness for both sides (Bendtsen) in ml/min 200 - 1/2 Thickness in µm 95 - Moisture in % 4 - Stiffness MD 2 - Stiffness CD 1 - Surface Strength Dennison (Wax Pick) >= 12 A 12A - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Bal Krishan 208001, Ordnance Equipment Factory, Phool Bagh 3000 30 EMD Required No ePBG Required No