ETD/CNB/NORTH CENTRAL RLY Tender Results

Hexagonal socket head Cap Screw M8x20 MM (Allen Bolt) as per specification IS:2269- 2006 Reaffirmed 202

Isolating cock 3/8 with vent for WAP-7 Locos. As per M/s Legris Part No:- 04691017 or M/s FTRTIPL Part No:023005000 or KBI Part No:- 1.F.1073. make:- Legris or Similar.

DC LINK CAPACITOR 2920 micro farad, 700 V DC,100A. or similar as per attached annexure.

18V Cordless battery powered Air blower as per specification attached as Annexure . One set consists of 4 items i.e. 1) Cordless blower - 01 No .2) Battery - 02 No. 3) Battery Charger - 01 No. 4) Leath

Supply of Diode Module MD3-800-44-D-N or similiar as per attached annexure.

Spray Paint RAL Shade 9003 - W120 (Signal White). Covering Capacity: 6-7 Sq mt/ltr.

SET OF NYLON TUBE 6mm OUTER DIAMETER FOR GAUGE PIPE LINES, AS PER CLW SPEC. NO CLW/MS/03/079, ALT-

PRESSURE REGULATION VALVE (PRV) SUITABLE FOR WBL-85HR type HRPTs of M/s SCHUNK MAKE PANTOGRAPHs

Shunt-270 used in M/s Schunk make WBL-85HR pantograph as per M/s Schunk Part no -909010013700, Drawing no-4-12800.5848.

Set of locking plate for TM support plate of WAG-9 loco Drg. no.-TRS/GMO/M2/G- 9/002 Alt- 2 or latest, item no. 2 & 3

Wire Rope & Wire Rope Clips for under Slung Compressor for 3-Phase loco for WAG-9/WAP-7/WAP-5 as per DRG

Dynamically balanced rotor fitted with shaft suitable for SAINI make MRB of model type SA2-004A of rating 2.8KW of WAG-9/WAP-7 locomotive.

Set of Condenser and Blower motors consists of 02 motors. (i) Condenser motor, (0.15KW, supply 415V AC +/- 10%, 3-phase, 0.7Amps, 63 frames, RPM 1350, Star connection, Reference IS: 325,

Supply, Fitment and Testing of Shrouded type DSL Conductor bar with hanger clamp, Joint Clamp and Joint co

OPERATING DEVICE ARRANGEMENT FOR CBC ASSEMBLY AND DETAIL AS PER SR.DEE/RS/GZB DRG. N

Set of hotel load bushing gaskets (Location A,B,C) for 7775 KVA 3-phase transformer of WAP-7 loco, ABB part

Set of Cable Disconnection Box Assembly for WAG9 Locomotives as per CLW Specification No.CLW/ES/3/0128/A or latest.

MIG welding wire dia of 1.2mm (Carbon steel flux core wire) of M/s. Ador make Type: AUTOMIG FC 121

High Frequency Transformer having 13.5KW, 20KHZ, 580V ( L*H*D-= 28*19*7.5cm)

DC-DC Transformer for battery charger 13 kVA,10kHz,550/220V,Dimension (LXHXD) 28X31X18.55cm.

Supply , installation and commissioning of steel porta cabin consist of with one room (3960X3050X2590 mm) as per attached Annexure-A.

Set of stainless Steel Hex head bolt full thread M12x50, Grade: A2-70, with Flat washer, Grade: A2-02Nos., Spring washer, Grade: A2-01No., Nylock nut, Grade: A2- 70-01 No. conforming to