North Eastern Railway Tenders

IOH Kit M-48 for Trident Make Air Dryer

Irreversible Thermal Strips Series Range 71 Degree

Set of Speed Sensor Suitable for IGBT Based Converter, Make Bombardier Transport, One Set

Sub Kit IOH-2A for Tap Changer N-32

Hex Head Bolt, Castle Nut with washer and split pin (each one No) as Ref.No.1 to 4 of ELS/LGD Drg. No. C/ELS/LGD/Bogie/3/131 (Alt.1 or Latest).

Kit-B as 660 M48 Spare to Air dryer.

Torque support for WAP-7 / WAG-9 Traction Motor as per CLW Drg.No.1209- 01.218-003 Alt-2, ABB Drg.No.IB. 016-00462, Alt-3

Gasket for Brake Cylinder to Drg. No. SR-LW-4-20-03

SPRING WASHER M6-B ZINC PLATED TO IS-3063.

Set of 8"x8" Air Brake Cylinder type UAH, to Drg No. SR-LW-2-19-11 Alteration-1 consisting of 1 No X mounting and 1 No Z mounting.

OUND WASHER M-10 ZINC PLATED TO IS-2016/1967 OR LATEST.

HEX HEAD SCREW [MS] M8 x 25mm TO IS 1364 B 4.6 CD B 4.6 OR HIGHER.

Earth Leakage Circuit Breaker (ELCB) current rating 25 Amp etc.

HEX HEAD SCREW M8X50 TO IS 1364 (PART 2)-B4.6-Cd.

Overhauling kit for Relay Valve Assembly

2.5 Sq.mm Thin Walled Flexible Elastomeric (Single Core) etc.

LED Light Fitting for Night Light with Berth Indication for AC/NON AC coaches etc.

Motor Spirit Petrol Motor Gasoline to IS: 2796/2014 (MS-87ON).

Inhibited Mineral Insulating Transformer Oil as per IS : 335/2018 and Railway requirement as per RDSO Letter no.TI/PSI/INSOIL/POLICY/19/01-18 dated 26.07.2019

TRANSFORMER OIL CONFORMING TO Specn. IEC-60296 & CLW Specn No. CLW/ES/3/0172 (LATEST AND RDSO REQUIREMENT)

Stainless Steel Straight Air Brake pipe for coaching stock 25 mm NB x 6.0 meter long (Approx. length) for coaching stock. Specn. ASTM -A 312, Schedule - 40S Gr. -TP 304(Seamless).

Overhauling Kit of FT1 Type Feed Valve

MCCB 100 Amp triple pole, 415 volt etc.

MCCB 200 Amp triple pole 415 volt 50Hz etc.

HRC Fuse tubular type 2 Amp 1.2 KV size 8X50 mm etc.

25KV Single Pole Vacuum Interrupter etc.

Screw ( phy 58 x 453) with bent coupling for Enhanced capacity screw coupling etc.

LED light fitting with night light (Corridor area) in LHB AC coaches Type-M (9+1 watt) Drawing no. LW76091, Alt-b confirming to RDSO spec no. RDSO/ PE/SPEC/TL/0091-2016 Rev-1, RCF Annexure-1, 2 and 3.

Battery Charger Unit cum Pre-Cooling Transformer 200 Amp., Input Voltage-3 Phase, 415 Volt, 50 Hz, Output Voltage 130 Volt DC, as per RCF Specification No. EDTS 041 (Rev.-B).

Low Maintenance Lead Acid Battery of 8V/500AH Capacity with Accessories on DLW Spec.No.DEL/SPN/193,Rev-R3

Sealing Washer for Axle box etc.

Nylon cable ties ST-9 NR self locking type, material Nylon-66 self extingushing, size 8.0 x 300 MM

Battery box assly for 3 phase locomotives

HEX NUT (MS) M8 TO IS:1364/2002 (Pt-3) P.C.-4 ZINC PLATED.

EX NUT (MS) M12 TO IS:1364/2002 (Pt-3) P.C.-4 ZINC PLATED.

DC/DC converter (24 V & 48 V)

Snubber circuit

Fuse Auxiliary, 415/110V along with Base with Micro Switch

Outer Door Assembly Complete (Left Hand) for ICF coaches to ICF Drg. No. T-5-1- 673 Alt. w/18, Col. -II.Matl. & Spec. -as per Drg.

Vertical Wear Liner for Centre Pivot Bottom etc.

Control transformer, 415/110V AC, 200VA, suitable

Set of Rotary Switch consist of 3 Items (1) failure mode operation switch

LAMINATED CLEAR SAFTY FRONT LOOK OUT GLASS (SMALL) SIZE 882 x 710 x 10.26+/- 0.3 mm TO WCR -TKD-EL/3- BF-G-9-025

Pin for support rod cylinder assembly to M/s. SIL new Ref. No. S02211 25701 or M/S CPL Part No. C015620 or M/s. GSEC Drg. No. GSEC/ PANTO/027 for AM12/IR01/PAN01 type pantograph.

Impellers for oil cooling

Steady tube assembly

Safety washer VS-24 as per Drg. No. 1209-01-411-046 Article No. 007 for WAG9/WAP7 locomotives.

M. S. FABRICATED IMPLELLER

Hexazon head bolt size M30 x 160 property class 8.8 zinc plated as per IS 1364/2002 for TM support plate.

NECKED DOWN BOLT M24X100 FOR WHEEL SET GUIDE OF WAP-7 LOCOMOTIVE CLW DRG. NO. 1209.01-315.006 ALT-1