Loading
Loading…
Loading…
1,109 results • Latest
Providing Project General Management Services for various constructionsites/sections for New Line, Doubling, Bypass Line, ROB/RUBs Projectsbeing executed by Construction Organization in the jurisdiction of NorthWestern Railway.
OHE work of Line-1, 2, 3 of UNCB siding at BAGA yard in RE-RGS-FL Section of Jaipur Division.
ADEN AWR Sub Division - Improvement & repairing work at existing bridge with providing Retaining wall, pitching work, Ballast retainer, standard no plaque, water way cleaning, epoxy work, HFL, DL marking, Flood Gauge ,Painting work etc at Major & Minor Bridge in ADEN AWR section.
OHE work in connection with proposed new loop line-4 & tourist line L-1 RGS end at DKBJ yard in JP-RGS Section of Jaipur Division.
Providing Assistant to Patrol man for patrolling during 'winter and summer weather' on track for protecting track in the jurisdiction of Sr.DEN/E & Sr.DEN/HQ.
ADEN/AWR Subdivision:- Improvement to road surface, drainage system and ancillary works at RUBs
24 Volt Round Shaped, Battery Charging Ammeter 50-0-50 Ampere with LED Illumination, Mounting Dia-52 mm, suitable for use with Tower Wagon Driver Desk Panel.
Washer for centre pivot to RDSO drg. no. WD-85079-S-2 Alt. 29, item-4.
110 VOLT BRUSHLESS DC (BLDC) RAILWAY CARRIAGE FAN, FIXED TYPE 400 MM SWEEP, CONFORMING TO RDSO SPECIFICATION NO. RDSO/PE/SPEC/TL/0021/2005 (REV-3) WITH AMENDMENT NO. 1 & RCF ANNEXURE-1
SINGLE CORE THIN-WALLED ELECTRON BEAM IRRADIATED FLEXIBLE COPPER CABLE, SIZE 1.5 SQMM, WITH COPPER CONDUCTOR, WORKING VOLTAGE ABOVE 750V AND UP TO 1.8/3.0KV, SUITABLE FOR USE IN ROLLING STOCK APPLICATION, AS PER RDSO SPECIFICATION NO. ELRS/SPEC/ELC/0019 REV. '4' OF FEB 2018." Note: The cable colour should be black and red, in equal quantities, and the length of each cable roll should be 500 meters
XLPE Cable, Working Voltage from 3.3 kV up to and including 33 kV (V2) ISI Marked to IS 7098 (Part 2) (Q2) (3 (3 ))
Carbon Brush Of Size- 8mm(Thickness) X 20mm(width) X 32 mm (Height) Grade- EG116S for Blower Motor of DETC 8 Wheeler Tower Wagon. Make: BHEL, CG or similar.
Gear Oil -SERVO GEAR HP 90 (OR) HP GEAR DRIVE EP 90 (OR) MAK SPIROL EP 90. Make:- IOCL/HPCL/BPCL or equivalent.
Battery charger suitable for 110V, 200 Ah lead acid battery set as per RDSO Spec No.: TI/SPC/PSI/200-250/CHGR/0210 OR LATEST.
Cordless Air Blower (Battery operated) as per specification: Air Speed : 270-280 Km/h, Voltage: 18 V, Type of Product: Cordless Air. Blower (Battery operated), including Batteries-02 nos. & Charger, No Load Speed : 17000-18000 RPM. Make: BOSCH or equivalent. Detailed specification attached in Annexure-A.
Door and window stop for body side door and window to IRS drg. no. C/DW-2085 Alt- nil.
PURGE VALVE KIT (AD) FTRTIL NO 790029185. DLW PART NO. 11661434
Fuel Cell Base Alcohol breath analyzer with inbuilt thermal printer and other accessories as per RDSO Specification No. RDSO/2015/EL/SPEC/0119 (Rev '2') dated 15.03.2018. One Unit consist 1. One Fuel Cell Breath Analyzer 2. Charger 3. USB Connector and cable for data download 4. Software CD required for data transfer to PC, 5. Paper rolls for printer (10 Nos.) , 6. Instruction Manual, 7. Carry case with one year Calibration certificate.
Digital Outside Micrometer of range 0-150 mm with Accuracy +/-2 micrometer, Resolution: 0-0.001, Make: Mitutoyo/Baker/Starrett/Facom or equivalent.
Ultrasonic Thickness Meter with calibration certificate from NABL/Govt. approved LAB.
Digital Depth Micrometer, Range 0-150mm, L.C.-0.01 mm, Make- Forbes or similar.
Endless V Belt C-70 Non-Cogged for Vent Pump Drive (ISI MAKE) Confirming to IS:2494 part-1/994 or latest.Make-veergrip,cysto.hilton or similar
MULTI RIBBED V BELT CUMMINS PART No. 3644382 or similar FOR 24V ALTERNATOR FOR 1600HPDEMU/DPC
Abu Road: Renovation and infrastructure improvement of existing DTTC/ABR.
Stainless steel Fully threaded Hex head screw, HEX HEAD STAINLESS STEEL BOLT
Dia 3.6x64 mm Spring Cotter Pin/R-Clip for Shackle lock/ Centre Pivot of BOXN/BCN Wagon to Drawing No.: RDSOs Drg. No. WD-97049-S/3, Alt. 12 or Latest, Item No. 10. Material and Specification made of steel confirming to DIN 11024. ZINC PLATED
SHELL GADUS S 2 V 100 3 GREASE OR LITHON 3 GREASE OF HPC AS PER MP.MI.15 REV.12 JAN.2019
Telecom work for Provision of installation of 55 CCTVs at 11 Parcel Offices of Bikaner Division
S&T associated work for provision of Ballast less track for Line No. 1, 5 and 6 at Bhiwani station,Line No. 1 & 5 at Sirsa station, Line No. 1 at Mandi Dabwali station over Bikaner Division.
Running Contract For Manufacture and supply of Thick Web Switches RDSO Drg. no. T-9775.
METALLIC FLEXIBLE COUPLING AS PER DRG NO WR-DHD-MEMU/3-CL-005 Alt.2