North Western Railway Tenders

Flexible Hose Pipe as per ADLW Drawing no. DEMU/PC-62/A

Hydraulic Hose ID-3/8" , Length -600 mm , 3/8" D-Type Female Fitting BOTH End ,

24 VOLT ALTERNATOR ASSEMBLY COMPLETE to Lucas-TVS part no. GAC5R - 24 V & CIL PART NO. 3236504

MINIATURE CIRCUIT BREAKER 10 AMP, 130 VOLT DC SINGLE POLE TO RDSO SPECIFICATION No SPEC/E-12/1/04 OF MARCH 92, AMENDMENT-1 OF JUNE 1993 AND RDSO DRAWING No. SKEL 3700 ALT-1 OF 05.09.94.

Draft key BG to RDSO drg. no. SK-99006 Alt-2. Matl.&Spec. As per drg. and confirming to STR C-9509 Rev-2 Amndt-1.

SET OF LED BASED FLASHER LIGHT

Spring Washer size M-16 mm

Hydraulic hose ID - 1/2 " length-900mm

Set of All Steel Lock Nuts

LOCO SIDE BUFFER ASSEMBLY.

LED BASED MARKER LIGHT TYPE

Temperature & Humidity Data Loggers as per attached Annexure-A.

SWIVEL COAT HOOK (THREE PEGS), as per Drawing: CC64254 ALT e

Armature fan conforming to BHEL catalouge No. 480400002 BHEL Drg. No. 14394080002 V00 OR ARES Part No. ARES/TM 4303/PE/002_R0

Dresser Flexible Coupling (Connector Pipe) to CIL Part No. 3872268

Bearing piece assembly with locking arrangement for single piece uncoupling gear.

ISI Marked ABC, Dry chemical powder Stored Pressure Type Portable Fire Extinguisher, Capacity 6 Kg, in SS body with Anti-Theft arrangement as per RCF Specification MDTS 46270, Rev.-06. AND AS PER DRG No. CC64262 Alt-g .

SET OF SANDING ARRANGEMENT FOR WAP7/WAG-9

Set of Single Ferrule Fittings for Air Brake System

Manufacturing and Supply of Elastic Rail Clips ERC J as per RDSO/Drawing No. T- 8258.

Right Skid to SI-665-167-666 PTFE Neutra [Right Skid to SI-665-167-666 PTFE Neutral section

LED-based emergency light unit, Suitable for use in LHB-type AC & Non-AC coaches, as per RDSO Specification No. RDSO/PE/SPEC/AC/0180-2016(Rev.0) & Conforming to Sheet 1 & 2 of RDSO Drawing No. RDSO/PE/SK/TL/0181 -2016 (Rev. 0).

Cast steel bolster with liner HS bogie.

Bogie centre pivot top .

A4 and Legal Size Multifunction Printer (MFP) (Q2)

PUSH BUTTON (RED) 110V DC

Laser capsulotomy system

Common Pipe Bracket with Control Reservoir for wagon

SET OF CRIMPING TOOLS AND ACCESSORIES CONSISTING OF FOUR DIFFERENT ITEMS AND QUANTITIES AS INDICATED. 1. CRIMPING TOOL MODEL M22520/1-01 - 01 NOS/SET 2. TH-29 TURRET CRIMPING DIE #12 & #16 CONTACT - 01 NOS/SET 3. EXTRACTION TOOL NO. AEC 16/12 - 01 NOS/SET 4. INSERTION TOOL NO. AEC 16/12 - 01 NOS/SET OF MAKE- AEC (ALLIED ELECTRONICS CORPORATION) OR DMC OR GIMOTA OR ITT OR CANNON OR AMPHENOL ONLY

Manufacture and supply of 10 mm thick Nylon Cord Reinforced Grooved Rubber Sole Plates (Pocket Type) RDSO/Drg. No. T-9790 (Alt.-01)

Execution of Balance Works for Major Redevelopment of Jodhpur Railway Station of North Western Railways on Engineering Procurement & Construction (EPC)

SPIGOT, SIZE 85 X 60 X 25 MM .

Seal Kit of HRE set as per Annexure A

Supply, Installation & Commissioning of Diesel operated Rail cum road vehicle, capacity - 600 Ton as per attached technical specification

Urology True Bipolar TURP.

Appointment of Project Supervision Services Agency (PSSA) for providing Project Supervision Services for various Project Sites/Sections in the Jurisdiction of Bikaner Division of NWR.

SUPPLY OF NUMERICAL FEEDER PROTECTION RE [SUPPLY OF NUMERICAL FEEDER PROTECTION RELAY CONFORMING TO RDSO SPECIFICATION.

SUPPLY OF MICROPROCESSOR BASED NUMERICAL [SUPPLY OF MICROPROCESSOR BASED NUMERICAL AC & DC AUX.

PRE SHORTNER FOR RF-361 DRAFT GEAR MINOR DESIGN.

Belt Tensioning Device complete, suitable for 4.5 KW Alternator of ICF-type Non-AC Train Lighting Coaches, as per RDSO Drawing No. SKEL-3940 with alteration No. 5 of Sheet No. 1 and alteration No. 5 of Sheet No. 2.

Bolster liner size 8 x 120 x 153 mm .

FOUR V-DEEP GROOVE AXLE PULLEY ASSEMBLIES, SUITABLE FOR USE IN 4.5 kW BRUSHLESS ALTERNATOR, AS PER RDSO DRAWING NO. SKEL-3883 WITH ALT-5 AND CONFORMING TO RDSO SPECIFICATION NO. ELPS/SPEC/TL/13 OF MARCH-1998, SUITABLE FOR 16.25T AXLE OF SELF-GENERATING COACHES FOR TRAIN LIGHTING APPLICATION.

PREVAILING TORQUE TYPE HEXAGON NUT SIZE M16X1.5 MM WITH NON METALLIC INSERT (POLYAMID) TO IS:7002-2018,REV.3, WITH PROPERTY CLASS-10 WITH ZINC COATING.

Vigilance control equipment

Set of Axle Box Complete without Bearing

Set of Stainless Steel Pipe Nipples

Running contract for Manufacture and Supply of Isolated/offsize PSC Sleeper 1in12 Turnout to Drg. No T-4218, 1 in 8.5 Drg. No. T-4865 and Derailing Switch Drg.No.T-6068

Side middle coping ( door way ) for BOXNHL wagon

Buffer Spindle With hex Nut .

Toothed segment.