Loading
Loading…
Loading…
17,103 results • Latest
((PH.NO: 37095) Hollow Fiber Dialyzer 1.0 m2 to 1.1 m2,UNIT:NUMBER
Secunderabad-Dhone Section: (1). Proposed Toe bank and Cess repairs (Part of work "SC-DHNE - Cess repair - 132850 Cum, MUE-SC - Cess repair - 69000 Cum). (2) Proposed Cess repairs (Part of sanctioned work 11.03.31.25.1.52.002) (3) Proposed Cess repairs (Part of sanctioned work 11.03.31.25.1.52.003)
Hyderabad Division: Proposed Construction of Running Room of 20 Beds capacity at MLY
Development of Sustainable Green Infrastructure for Environmental (Conservation and Employee Wellness)
Jib cranes as per enclosed Technical Specifications
Flow switch compatible with BHEL make 3- Phase MEMU Transformer of make Wika (Switzer) having model no.BGM-065-L115-F-4-FA-4-D-A and Range : 80 to 160 lpm or similar.
Supply of Smart Phone with SADS App of make SAMSUNG model A17 5G (8/124GB) as per enclosed specification. Make: Samsung Galaxy or its equivalent.
WASTE BIN COMPLETE (OUTSIDE) FOR LHB COACHES.
WD-SC Section: ADEN/TDU & ADEN/VKB -Provision for widening of cuttings, and drainage as per LWR profile at various locations under Sr.DEN/West/SC Section.
SC Division- DKJ-MUGR Section- Bridge no.100 at km.77/7-8 between GLE-PGP Stations, Bridge no.102 at km.78/13-14 between GLE-PGP Stations, Bridge no.107 at km.88/3-4 between PGP-MUGR stations, existing 1x12.20m steel girder proposed to be replaced with PSC Slab of span 1x12.20m
Bhalki: Rehabilitation of Station building at Bhalki Railway Station.
SW-I:-Provision of side drains at various locations under ADEN/BPA Sub division. SW-II:-Provision of side drains at various locations under ADEN/RDM Sub division.
SC Division- DKJ-MUGR Section-Bridge no.145 at km.99/12-13, Bridge no.155 at km.102/5-6, existing 1x12.20m steel girder between PGP-MUGR stations, proposed to be replaced with PSC Slab of span 1x12.20m
SC Division- DKJ-MUGR Section-Bridge no.114 at km.86/8-9 between Pandurangapuram-Manuguru stations, existing 2x12.20m steel girder proposed to be replaced with PSC Slab of span 2x12.20m
WADI-SC section -SSE/P.WAY/SEM & TDU -Provision of Drains, Pathways, Standardisation of Dead ends, Removal of Muck etc in connection with safety related yard improvement & up gradation works at various yards under ADEN/TDU sub division.
SW I.CTF: Raising of PF 1 & PF 2 from Rail level to High level, Provision of COP and passenger amenities at Chitgidda station under ADEN/VKB sub-division. SW II.CTF: Rehabilitation of Station Building at Chitgidda (CTF) Station in Sr.DEN/West jurisdiction.
SC Division- DKJ-MUGR Section- Br no.85 at km.67/13-14 between Gajulagudem and Pandurangapuram stations, existing 2x12.20m steel girder proposed to be replaced with PSC Slab of span 2x12.20m
Improvements to Circulating area and approach road at Koratla (KRLA), Mortad (MRTD), Armoor (ARMU) & Nukapalli Mallial (NPML) under ADEN/KRMR Sub - Division in DEN/North - West Jurisdiction.
Construction of Boundary at station approaches of Secunderabad station (KZJ-HYB & KCG ends), Hyderabad Station (SC end) and at Alugaddabavi (SC).
SW-I-Secunderabad Division - BPQ-KZJ section : TRR(P) of Exg. 60kg/90UTS rails on PSC6 sleepers 1660Nos/km density with new 60Kg R260 grade rails (LWR) for a total length of 10.984 Kms. as per annexure.SW-II-Secunderabad Division - BPQ- KZJ Section: TBR:-Through Ballasting of track along with deep screening by BCM for a total length of 31.383 KMs at various locations as per Annexure under Sr.DEN/North/SC Jurisdiction.
SC Division- DKJ-MUGR Section- Bridge no.130 at km.94/1-2 between Pandurangapuram-Manuguru stations, existing 2x12.20m steel girder proposed to be replaced with PSC Slab of span 2x12.20m.
SW-I- Secunderabad Division:- BPQ-KZJ section (DN,UP,UD) :CTR(P) of Exg. 52kg/60kg rails on PSC6 sleepers 1660Nos/km density with new 60KG/90UTS/R- 260 rails on PSC6 wider sleepers 1660 Nos./KM including recoupment and increasing of ballast cushion to 35 cm. and deep screening of ballast for a total length of 5.301 KMs by PQRS/TRT Method as per Annexure. SW-II Secunderabad Division:- BPQ-KZJ section (DN,UP&UD line ) :TSR(P) of Exg. PSC6 sleepers 1660Nos/km density with PSC6 wider sleepers 1660 Nos./KM including recoupment and increasing of ballast cushion to 35 cm. and deep screening of ballast for a total length of 81.43 KMs by PQRS/TRT Method as per Annexure under Sr.DEN/North/SC Jurisdiction.
Metal Beds (V3) (Q2)
CONCENTRATED ACIDIC SOLUTION B.P. (FOR BICARBONATE DIALYSIS) (1@ 58"5846@ 83 PROPORTIONING SOLUTION-A) 700 GMS OF DEXTROSE MONOHYDRATE IP POWDER SEPARATELY FOR EVERY 20 LITRE CAN) CONTENTS: SODIUM CHLORIDE IP -176 GMS/L AFTER DILUTION SODIUM 140 MMOL/L, ACETIC ACID IP-9.0 GMS/L AFTER DILUTION 4.0MMOL/ POTASSIUM CHLORIDE IP -5.5 GM /L AFTER DILUTION POTASSIUM 2.0MM OL/L MAGNESIUM CHLORIDE -2.575 GMS/L AFTER DILUTION MAGNESIUM 0.375 MM OL/L ,0.75m Eq/L- Caclium chloride -8.0 GMS/L AFTER DILUTION CALCIUM 1.5 MM OL /L ,3.0m eq/L - CHLORIDE 106 MM OL/L ,108 M eq/L(Firm has to take back empty cans),unit:CAN
Annual Maintenance Contact (AMC) for Dissolved Gas Analysis Apparatus (DGA) MODEL -GC2010 for a period of Three (03) years at Electric Loco Shed, Guntakal.
[PH.No.47170] SIGNOLAC LABELS 500 NOs IN EACH ROLL (STEAM AUTOCLAVE TAPE)
[PH.No.42534] PROXIMAL HUMERUS LOCKING PLATE SIZES: 2,3,4,6 HOLES WITH REQUIRED NUMBER OF LOCKING SCREWS FDA APPROVED (EACH 3 NOS)
[PH.No.42420] LIGATING CLIP CARTRIDGES YELLOW (S)
Circuit board for Knorr Bremse make Air Dryer, suitable for 3 Phase AC EMU to KB Part No. STN21386/1102.
MFT_SUR_[PH.No.36167] BOUGIE FOR ENDOTRACHEAL INTUBATION
MFT_SUR_[PH.NO.31306] SYNTHETIC CASTING BANDAGE 10 CM X 3.6 MTRS
Supply of Welding Conventional Type output Terminals, suitable for the M/s Powercon multi purpose welding plant current regulators with model of RG-500(image attached) (The material should be able to
Switch plate assembly complete polycarbonate cover frame and powder coated steel plate with 4 nos. ON-OFF switches and 1no. 3-pin socket 6A,250V AC with 2 nos. 1.0Amp Glass fuses with fuse holders con
PIPE CLAMP (FOR STAINLESS STEEL PIPES) TO ICF DRG NO-ICF/STD-3-5-028, ALT-C OR LATEST ITEM NO-4.(Warranty Period :Upto 30 months from the date of delivery.) Accepted offer: supply the item along with
Paint Enamel Synthetic Exterior finishing Post office Red ISC 538 to IS: 8662 (Reaffirmed 2019), with additional requirement of ICF/MD/SPEC-045, issue status 02, Rev.03 with Amendment dt.22-04-2008. P
Ya-Net Copper Fork Type Electrical connection Lugs or thimbles, Size 6 Millimeter Brand: Ya-Net (Detailed Description/Specification as per Product # 1 of GeM Contract No. GEMC-511687775780071 dt.09/06
Supply of HC65i Torch Head or equivalent suitable for M/s Techno crats Air plasma cutting machine with the model of Kalicut-25. ACCEPTED MAKE/BRAND:NEW WING