Boundary Wall Construction Tenders

Providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering. M10 grade Nominal Mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). (B-55/3.2.4)

Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm)

Providing and construction Solid CementConcrete Block masonry in cement mortar 1:6 (Cement : fine aggregate as per IS: 2116) using factory made, load bearing, approved quality, Grade C (4.0), as per IS: 2185 (Part 1), density of blocks not less than 1800kg/cum, minimum average compressive strength of units 4.0N/mm² at 28 days and minimum strength of individual unit is 3.2N/mm², set to level plumb including setting in position, providing scaffolding, curing, raking out joints wherever necessary etc., complete with all leads and all as per specification and direction of Engineer-in-charge in SUPERSTRUCTURE UPTO FLOOR FIVE LEVEL. For 200mm thick walls using (400x200x200)mm size blocks {Using fine aggregate (Crushed stone sand produced by crushed hard stone / rock as per IS: 2116)}