Loading
Loading…
Loading…
2,416 results • Best match
05/EWC(G)/2026-27
Laying & dressing of 11 KV, 3x300 Sq.mm XLPE Cable underground from 5 MVAT/F to 11 KV incoming switchgear in the trench 450mm wide, 900mm deep, providing 150mm fine sand cushion bench and 150mm fine sand cushion above the cable. The cable shall be duly protected by 1st class bricks two either side and third on top of the cables. The cable shall be duly protected by 1st class bricks two either side and third on top of the cables, laid in series one after the other, the work includes supplying of fine sand and bricks, refilling and ramming of the left out soil, closing the trench and leveling. Spare cable shall be left and buried in the trench in the safe of rings at both ends. Cable laying work includes unrolling, cutting, meggering and sealing both end of the cable.Supply & fixing of double compression brass cable gland with all accessories including earthing tag, shroud, complete termination, testing & commissioning as per IS/IEC standards.
Providing of Permanent electrical connection for the load of 80KW for Pump and pavilion Building and Indoor Stadium Cum office of synthetic Hockey Field Polo Ground Srinagar
HDPE Pipe Outer Dia 160 mm Inner Dia 148 mm for laying of XLPE Cable
PROVN OF DEFICIENT GEYSER FOR MD ACCN AND ALLIED WORKS AT AF STATION PURNEA UNDER AGE(I) (AF) PURNEA
Excavating of soft/loose soil in trenches, n exc. 1.5 m wide and n exc 1.5 m in depth; for laying of cable, etc. nexc 10 sq m on plan and n exc 1.5 m in depth and getting out, complete all as specified and directed
Work related to Shifting of 11 KV Power Line coming in between widening/renovation of Amritpur Jamrani motor road and Dam construction and Issuing 2000 KVA temporary connection under Electricity Distribution Division Nainital
LAYING OF LT CABLE & MAKING CONN. AT T/F
PROVISION OF TARMAC EXTENSION AND SHIFTING OF PERIPHERAL ROAD AT AF STATION NALIYA
Material and labour for clean dry river sand filling in trenches/ ducts for cushioning for underground cable 8 cm in depth before laying cable and 15 cm in depth after laying and punned after laying of cable complete all as specified and directed. Note:- Punned thickness shall be measured and paid.
Execution of S&T work for 1) Provision of CCTV, telephone and Railnet facility in connection with work 'Hatia Ranchi jn. Setting up of Mechanised Laundry of 6 TPD capacity in 2 shifts of 8 Hrs at HTE in Ranchi Division.', 2) Provision of FOIS connectivity & CCTV in connection with work ' Electronic In Motion Weighing Bridge(IEMWB), Cap-140 Ton for BICI'
of Tunnelling through Horizontal directional drilling (HDD) machine with accessories including handling of stores materials, preparation of sites, boring and laying of DWC/HDPE/GI pipes for crossing of S&T cable at bridges/culverts/track crossing/pucca road crossing. Boring diameter should be at least 110mm & shall be minimum 3 (three) meter below the river bed and minimum 1 m at track/road/pucca road crossing area etc. In case the site doesn't allow to perform as per schedule, written approval must be obtained from at least site in charge officer. The ground level shall be considered ignoring the bank height of the bank of the road. Note: DWC/HDPE/GI Pipe Supply is not covered under this item. Contactor shall provide all material required for work and adequate nos. of labours for proper laying of cables into the bore. Cable shall be laid cautiously so that it should not get damage due to rough handling & pressure on cable. Payment of boring shall be made only after laying of the cables into DWC/HDPE/GI pipe is laid in the bore.
