Loading
Loading…
Loading…
2,712 results • Best match
SPECIAL REPAIRS TO LT OVERHEAD CONDUCTOR TO LT UNDER GROUND CABLE AROUND SUB STATION NO 09 UNDER GE CME KHADKI
M & L for bituminous road/hard standing cutting to a width of 45 cm and depth 50 cm and length from 4m to 6m for laying of pipe for laying of UG cables and making good with PCC (1:3:6) type cI (using 20mm grade stone aggregate)
Provision of CCTV Cameras at Non-Interlocked Manned LC Gates at different locations over DDU division.
Transportation of HDT machine with accessories including handling of stores materials, preparation of site and boring of 110mm dia and placing HDPE pipe of size 63 to 40mm in single / double / triple etc required for crossing/ laying of Railway cables in a combination of quad & signalling cables etc. as per required comprising maximum 72 cores in any HDD section on land /bridges / culverts / track / pucca road crossing and blowing / pulling of Quad / Signalling cables etc. within HDPE pipe. Boring of trench shall be minimum 1(one) Mtr below the track to 1.5 (one point five) minimum 3 (three) meter below the river bed, 01 meter below other lands including road / pucca road 63 to 40 mm dia & its accessories suitable for HDT as permanently lubricated HDPE pipe 40 of size 63 to 40mm crossing area. This includes supply as per Specification No. RDSO/SPN/TC/45 /2013 with latest amendment & cost of the fuel and all other items which will be required for laying of cable through it. Inspection : RITES for HDPE pipe (for inspection charges cost of all sort of HDPE pipe is Rs. 195/- per Mtr.) NOTE: The number of HDPE pipes (of any dia as mentioned above) to be pulled in any HDD section will depend upon the numbers of quad / signalling cables to be pulled through that HDD section as per site requirement. At a particular site, the second /additional HDD is to be done only after completing the pulling of 72 cores of cable through 1st HDD other wise the second /additional HDD will not be counted as a new / additional HDD for the purpose of billing. Only cables to be supplied by Railway. Cable sketch/route plan showing division & depth to be submitted by firm.Execution of work as instruction of site engineer.
Electrical fitting Work in Municipal Corporation Buildings, Bhilwara.(Annual Rate Contract)
Supply and laying speaker cable of IS/ISO 9001 CERTIFIED COMPANY made following size 2 core twin twisted multi stranded electrolytic grade copper conductor, overall PVC insulated and armoured cable (Blue colour) on surface/ above false ceiling including cost of GI spacers, saddles etc. as required. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR
REPAIR/MAINT OF EXTERNAL ELECTRIC SUPPLY AND OTHER MISC WORK AT PALCHAN UNDER AGE (I) R and D MANALI
M & L for cutting exisitng bitumenous road surfaces not more than 150 mm thick, removing for laying of pipes/cables, making good with PCC 1:3:6 type C1 20 mm graded aggregate to match with the adjustant surface. Note Excavation and earth work below 150 mm thick will be measured and paid under relevent items, Complete all as specified and directed by Engr-in-Charge.(pcc will be measured and paid sepretly)
ADDN/ALTN TO OLD LOGISTIC SECTION AND BLDG NO. P-107 AT MAKARPURA AT AFS VADODARA
Excavation in trenches not exceeding 1.5 m wide and not exeeding 1.5 m in depth and getting out in soft/loose soil for removing/laying of cable etc as directed by Engineer-In-Charge.
Repair/ replacement/ maintenance of electrical installation and connected works at Mil Stn Kapurthala under GE Kapurthala
M&L for sand cushioning with a layer of sand 8cm thick before laying of cable and 15 cm thick after laying of cable in trenches complete all as specified.