Chemicals & Industrial Materials Tenders

Sticker labels for different products in different sizes- multicolour printing. a. 23cm X 8cm (AJC 900 gm) b. 22cm X 8cm (Pickle 01 kg) c. 28 cm × 7 cm (AJC 01 kg) Size may vary 1-2% Multicolour printed Self adhesive labels printed on approved quality self adhesive chromo paper 90/90 GSM, polyester substrate using high-resolution digital printing press with permanent adhesive, design to be approved by hpmc. Name of Work: Supply of multicolour self adhesive labels in flat sheet form suitable for manual application. Material Specification Self adhesive chromo paper/synthetic substrate with permanent adhesive. Labels to be supplied die-cut in flat sheet format. Roll form supply shall not be mandatory. Printing Specification: High-resolution multicolour digital printing. Printing should support barcode, QR code, variable data and sequential serial numbering. Minimum print resolution: 1200 DPI or higher. Registration tolerance: ±0.2 mm maximum. Special Conditions: Labels are intended for manual application; hence supply in flat sheet format is preferred. Supplier shall support batch-wise artwork revisions and serial number changes. Job may be released in staggered quantities as per requirement. Quality Requirements: No ink spreading, mis-registration, die-cut shifting or missing serial numbers shall be accepted. Labels should have smooth peel-off characteristics and proper adhesion. Delivery: Material shall be supplied within stipulated delivery period as communicated in purchase order. Authority reserves the right to accept or reject any or all quotations/tenders without assigning any reason thereof.

Stoma Adhesive Wafer Rigid Full Wafer 45 MM As per specification attached

PART NAME : IMPACT WEAR LINER DIMENSION : 150 X 150 X 44 MM ADDITIONAL INFORMATION : WEIGHT/PANEL:5 KG DETAILED TECHNICAL SPECIFICATIONS ARE AS FOLLOWS: 1) CERAMIC LINING COMPRISING OF HIGH WEAR RESISTANT CERAMIC BLOCKS EMBEDDED WITHIN THE HIGH HARD REINFORCEMENT FRAME

Distilled water plant for Laboratory Capacity 4 Ltrs per hr Made of SS (304 Grade) Fully Automatic with inbuilt safety cutoff

Asphalting Leveling Providing and laying bitumen tack coat Previous layer should be cleaned and bitumen emulsion to be sprayed Providing and laying an intermediate leveling coat of hot plant mix aggregate size of 20mm to 10mm with 80 to 100mm grade bitumen premix layer with loose thickness of 1 inch after compacting by roller with power steel wheel tandem roler After a gap of 21 days providing and laying an Intermediate leveling course of hot plant mix aggregate size of 10mm to 6mm with 80 to 100 grade bitumen premix layer with loose thickness of 1 inch after compacting by roller with power steel wheel Providing and laying seal coat with stone dust Including Minimum bitumen mix by hot plants