Loading
Loading…
Loading…
11,203 results • Best match
Custom Bid for Services - ---- Similar Category Piping Erection Service Operation And Maintenance Of HVAC System (Heating, Ventilation And Air Conditioning System) Operation and Maintenance Of Electrical Systems/Electrical Installations Professional Painting Service
Ventilation And Air Conditioning System) Operation and Maintenance Of Electrical Systems/Electrical Installations Professional Painting Service
ARMO of Electrical and Mechanical services for DFO-MSME office Building at M.S.M.E. Campus Sakinaka, Mumbai. (SH- Operation & Maintenance of electrical installations.)
GENERAL-Government Secretariat, Thiruvananthapuram- Running maintenance and service contract for Air conditioner units (up to 3TR) installed in North block and North Sandwich block from 01/04/2025 to 31/03/2026-AC-AMC-Electrical AC Work
OD185612/2025-2026:Dismantled the defective PCB, rectify the defect, re-install the same and make the unit in perfect working condition. :- 1TR/1,5TR/2TR/3TR
SA Divn: Construction/Repairs Gang rest room with tool room for Group D staff in DEN/Central/SA jurisdiction. (Including Electrical Work)- Maintenance period 3 years from the date of completion.
Supply at site, erection, testing & commissioning of vertical Flush/wall mounting type ,powder coated sheet steel , SPN 12 Way distribution board phosphatised and powder coated, double door with supply and fixing of 1 Nos. of 32 amps DP RCBO with 10 KA short circuit capacity and 30mA sensitivity, as incoming control with 8 Nos. of 6-32 amps SP MCBs with 10 KA breaking 38 capacity as outgoing control, including internal wiring by suitable wire and incoming cable termination using suitable terminal block with suitable cable gland, earthing / neutral din channel complete with all accessories duly making necessary opening on the wall and masonry work for controlling power/lighting/fan circuits in each building in an approved manner as directed by the section in charge at site. Note: 1.Bi-metallic washers must be provided for AL & Cu joints and for others GI bolts, Nuts & washers must be used. 2.Cable termination shall be using GI bolts & nuts with flat and spring washers & lugs invariably. 3. Board shall be fixed in concealed manner.
Electrical work in connection with provision of Power supply arrangement for New mechanized Laundary at ASH & GTNR, power supply arrangement work for SETC of PERC Dry cleaning machine , SETC of Tumbler Dryer , SETC of Rotary screw electric driven Air compressor , SETC of washer extractor , SETC of folder machine with stacker and SITC of feeder machine at linen center at GKP.
Laying of 1 No. XLPE insulated and PVC sheathed power cable of grade 1.1 KV size 3½/4 core size exceeding 25 sq mm but not exceeding 400/120 Sq mm Alluminium conductor cable direct in ground including excavation, sand cushioning, protective covering and refilling the trench 10 etc. as required. Cable laying should be as per IS-1255/1983 with latest ammendments. Digging of trench in all kinds of soil up to the depth of 1000 mm and 350 mm wide for laying of cable with supply and placing of second-class bricks, approx. 10 bricks per meter, refilling of cable trench with solid earth consolidating by ramming by 270 mm above the surrounding level over trench. (Cable will be supplied by Railway)
For the Work of Maintenance of HT/LT Line Before Kanwar Yatra 2026 to Avoid any Electrical Accident in the Area of AE-I/II/III Under EE, EUDD-33 KV Line, Meerut.
Installation of Earthing Rod Provided by the department.