Fabrication Works Tenders

Supply and placing of Design Mix Concrete M20 grade corresponding to IS 456 with minimum cement content of 350 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (river sand)coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, Wallers, Foot plates, brackets, steel Centering Plates, etc, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR FOOTINGS

Vibrated reinforced cement concrete M25 Grade Desing mix ( by weigh batching) using 20 mm size (SS5) hard granite machine crushed graded metal (coarse aggregate) from approved quarry using miminum quantity of 380 Kgs of cement per 1 cum of concrete including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc. to site all operational, incidental, and labor charges such as Providing Centring, shuttering and scaffolding with props and steel plate as per the approved shuttering plan and other accessories as per the norms and stability calculations including cost and conveyance of all accessories Using Cashewrina Ballies and wooden runners etc.complete for finished item of work, lift charges, machine mixing, laying concrete, vibrating, curing concrete etc, complete but excluding cost of steel and its fabrication charges etc complete for finished item of work (APSS No.402 & 403) For coloumns , Lintels, Water tanks, Rcc walls in building for 150mm thick Bottom Slab

RCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, but excluding centering, shuttering for Footing

Providing, Fitting, Installation, Testing and commissioning of 8000 GPH x 100 to 140 Mtrs Head submersible pump sets 02 Nos. (one for installation & one for standby) at Tube Well Bakshi Nagar by way of fabrication and fitting of U-shaped tie rod/clamp which is to be fabricated out of MS flat and to be fitted with submersible pump by fabrication and fitting of bolts and nuts which are to be welded on both sides of the clamp. The job also includes fabrication of 01 no. expander / reducer nipples for NRV of required size which is to be fabricated out of MS plate threaded at one end and flanged at the other end. Fitting of reducer /expander nipple with column pipe at one end with flange joint and with the discharge outlet (NRV) of the submersible pump at the other end. Job includes Providing and fabrication of 30 nos. (80mm/100mm dia) column pipes of length 10'each. Welding of pipes with flanges on both ends after cleaning the ends and grinding them for preparing the surface. A side cut is to be made in each flange to accommodate the submersible cable along with standard holes with proper PCD. Lowering of submersible pump set and column pipes one by one by fastening the nuts and bolts and insertion of rubber insertion sheet. The complete job includes cost of materials i.e. Submersible Pump motor set, tie rod, expander, reducer, nipple, clamps, MS pipes, Flanges, rod, nuts, bolts, rubber sheets and labour charges. Job also involves carriage and shifting of pump set to the work site and lowering of submersible pump set. Making connections with the panel for testing of submersible pumpset on full load at site. Job also includes providing, installation, testing and commissioning of sluice valve and NRV 200mm dia each for already installed suction line at pumping station Bakshi Nagar.