Loading
Loading…
Loading…
6,155 results • Best match
Rennovation of Entrance Arch, Main Gate, Compound Wall and Balance Portion CC Road at Hindu Buriel Ground, Kummar Bazar in Div No.04 Under AE-7 Section.
Supply and placing of the M20 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including tremmy pumping,laying concrete,curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. Bored cast-in-situ under reamed piles includig bore pile stem and under ream bulbs.
Replacement of Existing Fire Fighting Pipelines at Berth No. 10
Supply, Fabrication, Erection, and Testing of cement lined (inside) ERW steel pipe of 450NB confirming to BIS:3589 of Grade Fe 410 of thickness not less than 9.5mm for 300NB and above and not less than 8mm for below 300NB for carrying sea water including supply of Pipes, specials, Bends, Tees, GI Flanges, Dummy flanges, Gaskets, Bolts & Nuts, Washers, Reducers, Expanders mobile steel/RCC supports saddles inserts fixtures including painting 3 coats of approved colour (one coat of zinc –rich primer & two coats of epoxy paint with fire red colour) externally Note: I ) Pipeline shall be provided with Flange Joints for every six meters length. II) The existing RCC support structure shall be replaced with steel support, Doubler plate, SS rod and clamp with bolt, nut and washer complete shall be provided to the Mobile steel/RCC support structure from the bottom of pipe shall be 1.5 Feet and the total height of mobile steel support shall be 2 feet. III) Media of flow Sea water.
EWSCA-12/2026-27
Fabrication and erection of neutral earthing L Type support made of M.S. Channel size 100x50mm. Structure shall be 4 Mtr. Long with 1 Mtr. Arms. Structure shall be grouted in ratio 1:3:6 in block size 300x300x700mm and painted of welding joint with one coat of Ready Mixed primer and Two coat of enamel Aluminium paint work includes connecting neutral bushing rod of power Transformer and M.S. Earthing strip with the help of flexible copper bond, M.S. Bolt and washer.
REPAIRING OF 20 NOS ELECTRIC PIPE POLE OF MS PIPE (FROM OLD AND DAMAGED PIPES FOR ELECTRIC LONG POLE AT AKWMC KATRAS AREA
straightening and aligning fabrication
Excavation for Structures, PCC 1 3 6 in Foundation, Plain Reinforced cement concrete, Providing and inserting dowels bars, etc.
Supply and fabrication of Structural Steel in Truss member, Stringer, Cross Girder etc. including wastage for Gusset Plate, Lacing, Batten Plate Shear Connector.
Modification of the existing die-punch sets and machining fixtures to make it compatible for 4.5 mm thick metal sheet and Manufacture and supply copper prototypes half cells of 4.5 mm wall thickness for the 650 MHz multi-cell SCRF elliptical cavity
The vendor shall be technically competent and should have experience in press tool and structural fabrication work and forming and fabrication of elliptical halfcells for multicell elliptical Radio Frequency Cavity.