Loading
Loading…
Loading…
6,243 results • Best match
Development of an Open-Air Party Zone with Stage, Toilet Block, Green Rooms, and Boundary Wall Opposite IMAX at Lake View Park, Hyderabad
Supply and placing of Reinforced Design Mix Concrete M 25 grade (1:1:2) corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm and down size graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (50:50) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges, seigniorage charges etc, complete for finished item of work and as directed by Engineer-in-charge. FOR FOOTING
Construction of CC Drain and CC Culvert from A) D.no- 9-10-14 to irrigation bed, B) D.no-9-10-442 to D.no-9-10-437, C) D.no-9-10-437 to D.no-9-10-473, D) D.no-9-10-473 to D.no-9-10-463 and E)D.no-9-10-209 to D.no-9-10-211 in R K Colony Ward No.22 of Tuni Municipality.
Supplying,fitting and placing HYSD bar reinforcement (FE 415) grade as per drawings and technical specification for bars below 36mm dia including over laps and wastage, where they are not welded. This rate includes cost and conveyance of steel and binding wire to work site, labour charges for cutting and bending, fabrication of steel etc., complete as per SS and as directed by the Departmental technical higher authorities.
Construction of CC Drain and Culverts from D.no: 5-10-34 to D.no: 5-38-6 at Ashok babu gari street in Ward No. 25th & 26th of Tuni Muncipality
Supplying,fitting and placing HYSD bar reinforcement (FE 415) grade as per drawings and technical specification for bars below 36mm dia including over laps and wastage, where they are not welded. This rate includes cost and conveyance of steel and binding wire to work site, labour charges for cutting and bending, fabrication of steel etc., complete as per SS and as directed by the Departmental technical higher authorities.
construction of 33KV line from 132 KV S/S Beenupur to 33/11 KV S/S D-Centre Under Business Plan 2026-27
Fabrication,Erection,Fixing,Laying,saging,completion, testing and commissing of 33kv line Works.(As Per RESPO Norms & Drw.) :- exp. pit digging and erection, Grouting of s/s structur & building of plinth.tensinoning of conductor,fitting of armour rods and binding of conductors.Jointing ,cable termination and connections,etc
Construction and Establishment of Science park and Planetarium at Ram Ganga Nagar sector 8, Bareilly.
SITC OF MAIN PANEL FEEDER PILLAR: Design, Supply, installation, testing and commissioning of indoor/outdoor floor mounted/ wall mounted, IP43/IP65, IEC 61439/IS 8623, factory built, modular, sectionalised, compartmentalized, extendable type HT/LT cubicle panel of suitable size suitable for operation on 33/11/0.433/0.415 kV, 50 Hz AC 3 phase supply system fabricated from CRCA sheet steel of 2mm thick for frame work and covers, 3mm thick for gland plates with stiffeners wherever required, having vibration free structure chemically treated with seven tank process or better before painting for surface treatment and powder coated in approved shade, with suitable electrolytic grade high conductivity bus bars extensible, DMC/ SMC (whichever is superior) bus bar supports, with short circuit withstand capacity as mentioned ,bottom base channel of section not less than 100mmX 50mmX 5 mm thick, fabrication shall be done in transportable sections, entire panel shall have a common earth bar of required size at the rear with 2 Nos. earth stud, connections and interconnection with solid conductor wires / copper strips, neutral links, control wiring with 1.5 sqmm. & 2.5sqmm. PVC insulated FRLS copper conductor S/C cable for voltage & current respectively, including providing and fixing following switch gears as per SLD ,technical specifications etc.complete in all respect so as to fulfill all as required. LT Panel The minimum clearances between bus bars shall be as follows : Phase to phase - minimum 20mm. Phase to neutral-minimum 15mm. Incoming: 2Nos 1000 Amp. 4P ACB of 50kA EDO Breaking capacity. Metering: 2 Set of CT's one of 1000/ 5Amp ratio for Multifunction Meter. 1 Set of CT's one of 1000/ 5Amp ratio for AFCR Relay. 2 Set of CT's one of 1000/ 5Amp ratio for 50,50N,51,51N Relay. 2 Nos. Set of Phase Indication Lamp. 2 Nos. of class-III Type SPD. Bus Bar: 1500 Amp.TPN aluminimum bus bar of suitable length.36KA. Outgoing: Phase indication lamps on each outgoing to be provided. 05 No. 400 Amp 4P MCCB. (36 KA). 01 No. 100 Amp 4P MCCB. (25 KA). 05 No. 63 Amp 4P MCCB. (25 KA). Panel described as above
Providing Covered Sitting Area for Gents Students at Dr. YSR Architecture and Fine Arts University, Kadapa
RCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc. to site, centering using casurina ballies, bamboos, wooden reapers, runners, wood posts, wall plates etc., including all operational, incidental and labour charges machine mixing, lifting of concrete manually, laying concrete, vibrating, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for Pinth Beam