Fabrication Works Tenders

M.S. structural works with hollow sections (square or rectangular shape) conforming to IS: 806-1968 & IS:1161-1998) connected to one another with bracket, gusset, cleat as per design, drawing & direction of Engineer-in-Charge complete including cutting to requisite shape & size, fabrication including metal arc welding conforming to IS: 816-1969 & IS: 9595 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of all M.S. Hollow section, all consumables such as electrodes, gas and hire charges of all tools and plants and labour reqired for execution and all incidental chages (such as electricity, labour insurance) etc. complete. i) For roof truss works Electrical Sub Station

Provision for steel tube 60.3mm OD & 3.6mm tk including fabrication and all labour charges for erecting etc complete

6m Span over head cantilver structure with 300 mm dia MS one vertical post Supply, fixing & eraction of built up cantilever structure 6m span comprising of one vertical posts of 6.00 M height made up of 300 mm NB heavy class MS pipe as vertical member welded with 10mm MS plate at top & 12 mm M.S. Plate at bottom. The horizontal truss shall comprise of 50 mm dia heavy class M.S. Pipe and 40 mm dia heavy M.S. Pipe as bracing & 10 mm MS plae at bottom for fixing to verticial post as per structure design & drawing with one of steel primer and two coats of synthetic enamel paint. The work includes constructin of RCC foundation of size 0.90x0.90x1.50 m of required depth as per site condition for built up structure including earth work in excavation 100 m thick lean concrete in 1:3:6 cement coarse sand and 40 mm gauge stone ballast. RCC with and 1:2:4 cement coarse sand and 20 mm stone grit including supply and fixing of 25 mm dia foundation bolts 600 mm long as per provision of structure design including cost of reinforcement & shuttering. The lateral vertical clearancess and complete. Installation work shall be as per relevant clauses of MORTH specification section 800 and IRC 67 2010 complete in all respect the rates shall include cost of design fabrication, supply, transportation, local shifting erection of signage structure using crane, inclusive of all taxes etc. all T & P machine, material and labour required for proper completion of work as per direction of Engineer-in-charge.

90.14.1.2:Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623. Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 1.6mm CRCA sheet, powder coated (excluding base frame)

Steel Fabrication

Steel Fabrication Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/we...