Fabrication Works Tenders

Providing, Fabrication, machining with straightening work of Guide Tee, Track, Sealing frame, Leaf frame or any part of gate's, complete as per drawing with testing, including cost of all materials, with machinery, labour, tools and tackles cutting, aligning, welding, finishing, cleaning etc., applying one coat of zinc rich epoxy primer and two coats of cold applied coal tar epoxy paint, etc., complete as per specifications and approved drawings with all lead and lifts, including packing & forwarding, transportation charges for structural steel components and other materials.

Providing and fixing cast iron open channel slide/raising gates with manual operation, conforming generally to IS 13349 / BS 7775 / AWWA C560, of size 700 × 700 mm, including fabrication, placement, construction of casing, excavation, concreting, welding of steelwork, and completing all associated works in all respects as directed by the Site Engineer.

Fabrication of steel structures of M.S angle ,M.S.channel & M.S.Flat including cutting ,drilling as per design and drawing.

Price for supply, fabrication, erection, installation, testing, electrical connection, 8 commissioning,loading & unloading of LT panel (CRCA sheet, 1.6mm sheet with both side bus alley and back side cable alley, copper busbar 800A, 4 Bar) with 630A ACB, 4P, 50KA,MDO with microprocessor release and LSIG protection as a incoming-2Nos. (with interlocking system between two incoming feeder); 320A MCCB, 4P, 50KA as a outgoing - 2 Nos.; 200A MCCB, 4P,36KA as a outgoing 4 nos; 100A MCCB, 4P,36KA as a outgoing 2nos; 63A MCCB, 4P, 36KA as a outgoing 2nos including internal electrical connection with suitable size copper wire and copper bus bar and provision of digital multimeter module and modular LED indicators with provision of suitable cable alley.

Supply and Delivery Fabrication of MS doors and windows with outer frame and shutter frame in MS angle of size 40mm x 40mm x 6 mm with MS flat 25mm x 25mm x 6mm and MS sheet of 18 gauge including ventilating arrangements using 20mm square MS rods with locking arrangements including two coats of approved enamel paint over coat of red oxide including cost of angles, plates, sheets, fabrication charges, cost of hold fast and transportation charges etc., complete.

Cement Concrete 1:4:8 (One Cement, Four crushed stone sand and Eight broken stone jelly) using 40mm size hard broken stone jelly excluding cost of centering shuttering reinforcement grills and fabrication charges but including curing etc. complete and as directed by the departmental officers.