Fabrication Works Tenders

FRAME WORK Supplying, fabrication & fixing M.S u-channel of 6 mm thick of size (75 mm x 40 mm x 40 mm) of for making platform for installation of outdoor unit of 16.5TR concealed/DSU split AC incl. drilling 2 nos holes in each channel including cutting holes into the wall & grouting the same with cement concrete (1:1 ½ :3) etc. fabricated with horizontal angle of 25 mm x 25 mm x 5 mm and flat (25X5mm) iron and with 1mtr height side railling made of angle and flat with necessary painting incl. shade arrangement with GI corogated shade (Tata/Jindal) with proper clamping arrangement

Description:- Design fabrication, supply, fixing & wiring of Block indication panel made of 16 SWG powder coated MS sheet of size 39cmx24cmx15cm appx. Consisting of buzzer, counter & different

Supply, installation ,commissioning and testing of LT fedder pillar 415 Volts, 3 Phase ,50 Hz Outdoor type factory made, hinged double door ,with door open upto 150 degree when swung and doors should automatically come to closed position if not kept open with effort , aldrop bolt locking arrangemnets of size suitable to accommodate the following accessories, however the depth of panel board shall not be less than 500 mm, made out of 2.90 mm thick MS steel sheet , CRCA sheet inside 2 mm thick total modular type fabrication with 7 tanks process, IP-54 with coloured insulation sleeve, rubber, insulator outdoor type totally enclosed weather dust and vermin proof as per IS with front opening suitable arrangement having aluminium bus bar of 400 amps capacity for RYB and half for neutral and insulated with insulators, including connecting incoming and outgoing cables necessary PCC 1:3:6 in foundation and made out of 65 x 65 x 6 mm angle iron grouted at ground above 30 cm from ground level. Comprising complete all as specified with the following accessories.

R.C.C.Jolly by a new of following size in R.C.C. 1:1.5:3 using 20mm gauge hard broken granite stone jelly and river sand excluding cost of reinforcement but includingcharges,fabrication charges curing neat finishing and labour charges for fixing the jolly in position with standard spefication

Description:- Fabrication and erection of 4-Pole structure (Rail pole will be supplied by Railway) 02 complete with 02 sets AB switch, DO Fuse, LA, Insulators & all allied accessories with angle, channels, clamps, nut bolt etc for 11 KV Side (each set comprising 03 nos.) NAGPUR-SECR-DIVISION-ELECTRICAL/SOUTH EAST CENTRAL RLY