Fabrication Works Tenders

Supply and fixing of stainless steel SS304 grade tubes, sections, plates, sheets and pipes of all sizes and diameters etc., including cost and conveyance of all materials and labour charges for fabrication of stainless steel railing works using SS welding rods including buffing, polishing, lacquer finishing to present seamless finishing etc., complete as directed during execution.

LAB TABLE WORKING TABLE Supplying and placing Chem lab Table, Working Table Placing 900W X 600D X 750H Granite top table with storage beneath the work surface. The opening of the double-door base units is without obstaclesuch as anytype of upright rail supporter in between the doors. e base casework is equipped with removableacced back panels for utility connection and maintenance purposes. All exposed fastenersand holes of the casework are covered with PP,PVC ornylon plugs. Thecolour of the plugs will be colse enogh to blend in. Whole steel construction with pure epoxy powder coating.Fabricated and shapeg with premium grade CR/HR steel sheet of minimum 18G & 20G thickness extrusion molding and proper welding job.The steeel laboratory furniture components of minimum thickness specifications are the following:Removable Rear Access Panel, Designing of the Removable Rear Access Panels Provides an easy access for installation and mantenance of utility service lines. Adjustable Shelf:All four ends of the shelves are folded twice to form "C" shape for reinforced strength. The incremant between two vertically adujacent clips will be no more then 13mm. All nuts/rivets are of SS 202. Drawer bodies are of four sided drawer box desing and provide with reinforcing curl fabrication on all top edges for strengh reinforcement, Drawer heads are of steel dual-panel construction. Theseparation between the outer and inner panels and filled with sound deadening material. Each drawer is equipped with rubber bumpers to prevent collosion of metal parts when closing. SS rails for drawer slier with minimum 10kg to withhold the load. Door panel :steel dual-panel construction with internal reinforcement steel. The separation between the outer and inner panels and filled with sound deadening material. Each door is provided with roller catches and rubber bumpers. Finish:All metallic parts with pure epoxy powder coating finish are pre-treated with an iron phosphate multi-stage process including a final de-ionized water rinse to ensure optimal adhesion of the coating material of above 70 micron thickness.The product must be from a Manufacturer having ISO 9001,ISO 14001,,AIOTA ,BIFMA COMPLIANT, GREEN GUARD,SEDEX CERTIFICATE.

VRCC M-20 grade nominal mix (cement :fine aggreegate: coarse aggregate) corresponding to table 9 of IS456 using 20mm size graded machine crushed hard granite metal (coarse aggreegate) from approved Quarry including cost and conveyancej of all materials like cement,fine aggregate (sand) coarse aggregate, water etc, to site- and excluding seigniorage charges, sales and other taxes on all materials including alloperational incidental and labour charges such as machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work, but including centering shuttering including over heads & Contrtor profit

VRCC M-20 NOMINAL MIX (CEMENT : FINE AGGREGATE : COARSE AGGREGATE) CORRESPONDING TO TABLE 9 OF IS 456 USING 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL (COARSE AGGREGATE) FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS LIKE CEMENT, FINE AGGREGATE (SAND), COARSE AGGREGATE, WATER ETC., TO SITE INCLUDING ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS , MACHINE MIXING, LAYING CONCRETE, VIBRATING, CURING, LIFTING (MANUAL) ETC., WITH MINIMUM CEMENT CONTENT OF 400 KGS PER CUM OF CONCRETE, INCLUDING PROVIDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC., FOR UNSUPPORTED HIEGHT OF 3.66M ETC COMPLETE BUT EXCLUDING COST OF STEEL AND ITS FABRICATION CHARGES AND EXCLUDING SEIGNIORAGE CHARGES & GST ON ALL MATERIALS, FOR FINISHED ITEM OF WORK FOR SEPTIC TANK TOP SLABS OF 150 MM THICK (APSS NO.403)

Fabrication and Supply of Iron Sheet Door of size 1.20 m X 2.10 m using 1 ¼ x 1 ¼ x ¼ Iron Angle for Door Frame and using 1x1x ¼ iron angle Door shutter frame for vertical, horizontal members and strengthened by stiffeners using 16Gauge G.I sheet including welded with 6nos of hold fasts, 2nos of Tower bolts, 1 No. of All drop, 2 Handles & 3 inches with One coat of best quality Red oxide primer including cost and conveyance of all material and all labour charges and all other incidental charges etc. completed as per standard specification.