Fabrication Works Tenders

Supplying, fabrication and placing inposition of MS/RTS steel reinforcement for RCC works including labour for cutting, bending, tying and fixing in possition as per specification including cost of all materilas, lead, lift, labour, cost of binding wire etrc., complete as directed by the department engineer at site.

Repair to reduction gear by way of fabrication and turning shaft fabrication of horizontal gear housing and fitting oil seal topping of gear oil to the required level providing and fitting of nuts and bolts and gasket etc including cost of material and labour charges of PS Tank CF Tank and Falsh mixer of Filtration plant no. 1,2,3&4 (Rate to be quoted by the contractor)

Supply, installation, testing and commissioning out door type cubical panel board made out of 3.15 mm thick MS sheet and MS angle section 50x50x6 mm on PCC 1:2:4 type B-1 platform 60 cm above the ground level and 45 cm below the ground level, frame factory fabricated with front and back open able double door system lockable/open able by Keys with locking arrangement the outer shell completely vermin proof .suitable for 3 phase 4 wire 415 Volt, 50 Hz, factory fabricated (Factory approved from CPRI) having modern fabrication and followed by powder coat painting provided with suitable gasket to make it dust/vermin proof and general construction confirming to IS:8623/93 comprising of the following:- (i) MCCB,4pole ,63Amps, 25KA(incoming)-01 No (ii) MCB TPN - 63Amps, 16 KA( Out Going) -01 No (iii) MCB SPN 6-32Amps 10 KA - 02 Nos (01 Out Going & One Spare) (iv) Bus bar chamber with and including aluminium strips (set 4 nos) suitable for 150 amps duly insulated wired & duly mounted on porcelain insulators. (v) Digital panel for Amp, volt meter and other parameter flush mounting of size 96x96 mm up to 0 -60 Amps (vi) Indicator lamps three phases RYB.

Supply, installation, testing & commissioning of totally enclosed feeder pillar outdoor type of size (1mx1mx0.5m) fabricated out of 3.15 mm thick CRCA sheet dust and vermin proof powder coated double door type (independent cabin including locking arrangement for each MCCBs/MCB, bus bar chamber enclosed complete suitable for operating on 415 Volt 50 Hz AC supply internally wired with copper conductor having legs 90 cms made out of 50x50x6 mm angle iron grouted on brick masonary platform upto 45 cms. Brick masonary platform should be 60 cms above the Ground Level. Comprising the following:- .Note:- (i) The panel shall be front operated with cable entry from the bottom with cable glands. Earth bus shall be part of the main feeder pillar. (ii) Fabrication of feeder pillar box to be done with 3.15mm thick CRCA Sheet (iii) Cost for construction of platform for panel of brick masonary work in CM 1:6 with foundation PCC 1:4:8 type D-2 including plaster work, PCC copping 1:2:4 (40 mm thick stone aggerate), deemed to be included in the item rate. No Extra payment will be made. (iv) MCCB's should be connected with extensions terminals at both side (incoming and outgoing).

Carrying out Civil Engineering works like surveying & leveling, checking of form work fabrication, reinforcement fabrication as per drawings, witnessing sample retrieval & testing for various construction materials, ensuring concrete ingredient ratio at batching plant and pouring of appropriate grade of concrete in plain and reinforced concrete works, ensuring proper mixing of approved ingredients & waterproofing admixtures for mortars and brickwork, plaster, flooring & waterproofing works, and other civil & PH works including supervision of construction safety as per BARC specifications & relevant documentation, compiling, binding and preparation of tender documents & Agreements overall as directed by Engineer-in-Charge. Notes : (1) Each Job shall be carried out by one qualified Technician having SSC with Trade certificate in Masonary/Plumber/Carpenter/Painter Trade of not less than one year duration from ITI/Government Recognised Vocational Training Institute or experienced Technician retired from Government service. (2) Deployment: The contractor shall deploy one Technician for each job as Single Day work for 6 working days per week for minimum 8 ½ hours per day with 30 minutes of break, in General (Ist / IInd) or on Round the clock shift including Saturdays, Sundays & holidays whenever necessary as per the discretion of the Engineer-in-Charge during the contract period. In case of emergency works like continuous pouring of concrete or shutdown/maintainance work, the Technician will have to stay longer occasionally as per the instruction of the Engineer in-charge. No additional payment will be made on this account . (3) Period of work: The contractor shall carry out number of Jobs per day as directed by Engineer-in -Charge. (4) Mode of measurement : Measurement will be per job basis per day. A single job shall be carried out by deploying one Technician exclusively for the particular job. (5) The Technician should be engaged after scrutiny by EIC of CED, BARC and approved by Competent authority and the deployed Technician will report to BARC Engineer/ EIC. (6) The minimum notice period before change of technician is 1 (One) month; failing which a compensation, for not providing technical support, of Rs. 1249/- per day of shortfall in notice period will be levied on the contractor.

Definition of Similar Work Supply, installation, Fabrication & assembly of Cyclotron/Accelerator/Reactor/R&D units spare parts made of metal (SS/CU/MS etc) or Nylon,HDPE job involving machining, fabrication, test etc.