Loading
Loading…
Loading…
6,421 results • Best match
Providing and fixing SS Truss with Glass roofing for meeting room staircase, Truss work for Meeting room front & Renovation works for Meeting Hall, Board room, Electrical room, Construction of Pantry and Dormitory at FF room and Construction of block work (Main gate to PMS Section) of KSPH & IDCL, Bangalore
Steel Fabrication
Water body rejuvenation of Hirekere lake of Hubli-Dharwad Municipal Corporation under AMRUT-2.0
Steel Fabrication
Repair and renovation at Nistarini Kalibari Ghat under Baidyabati Municipality.
M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer incharge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc. Payment to be made on the basis of calculated weight of structural members. For built up sections / srtuctural members of specified sections weighing not less than 22.5 Kg./m
Providing CC Road, CC Drains (For drain damaged portation) and Balance Portation of UGD Lines at Old Vehicle Shed to Vengaiah nagar Tobaco Company in Div No.55 under AE-6 Section (RECALL)
VRCC M-20 Design mix (Cement: fineaggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work, but excluding centering, shutteing for culvert slabs
Construction of Admin Block and Quarter Guard building at 25th BN ITBP, Tezu, Arunachal Pradesh.
Design, fabrication, assembly, wiring and supply of front operated dead front cubicle type compartmentalised as per Form 3B, rear access free standing, dust and vermin proof (IP 42 ingress protection) main switchboards suitable for use at 415 volts, 3 phase 4 wire 50 Hertz system suitable for a symmetrical fault level of 25 kA at 415 volts, fabricated from 2 mm thick CRCA MS sheets with hinged, gasketted (metal based neoprene) and lockable doors having structural reinforcement with suitable angle/channel/T/flat sections including 3 mm thick gland plates on top and bottom and including lifting hooks and including GI earth strip of required size with 2 nos earthing terminals and including powder coated paint finish of approved shade over metal surface cleaned and treated with seven tank process complete with interconnections etc as per specifications, as required and as below. (Note: The contractor may select the next higher fault rating of MCCB if it is not readily available ,without any extra cost ,as the figure indicated within the bracket are required maximum fault level of the panel.)(Note: The contractor may select the next higher fault rating of MCCB if it is not readily available ,without any extra cost ,as the figure indicated within the bracket are required maximum fault level of the panel.) - Incomer from Existing Supply - 1 No. 400A 4P MCCB (36 KA) with electronic releases (O/C, S/C, E/F) - 1 Set - digital multifunction meter (showing harmonics along with all other electrical parameters such as voltage, current, Hz, KW, KWHr, PF.) - 1 Set - 0-500V, digital Voltmeter with selector switch, 3 No. phase indicating LED lamp to show the incoming power with control SP MCB. - 3 nos. indicating LED lamps for On/Off/ Trip with protective SP MCB's. - 1 Set of CTs of the ratio630/5A for APFC Relay, Burden 15 VA - 1 Set of CTs of the ratio630/5A with class 0.5 Accuracy for Metering, burden 15 VA - 1 Set of. 400/5A , 15 VA, 5P10 CT's for Protection - Bus Bars - 300 amps TPN Aluminium Busbar. All busbars and interconnections shall be of suitable size Al strips current density of Al shall not be more than 0.8 Amps/ sq.mm. Out Goings - 12 Nos. 63A (36kA) 4P MCCB. - 4 Nos. 40A (36kA) 4P MCCB. - 4 Nos.32A (36kA) TPN MCB - 2 Nos.32A (10kA) DP MCB - Main LT Panel as described above. - Design, manufacture, supplying, fixing in position, testing and commissioning of the following front operated cubicle type, front access 2mm thick mild steel sheet, free standing, dust and vermin proof, switchboard with IP42 protection with hinged and lockable doors complete with interconnections, tinned copper crimping lugs, bonding to earth and painting, suitable for use at 415 volts, 3 phase 4 wire 50 Hz system and suitable for a fault level of 25 MVA symmetrical at 415 volts.
Hyderabad Division: 53 High mast lights at 10 Goods shed GJWL-4, MDAK-7, DHP- 4, BDHN-5, SIPT-4, JKPT-9, JCL-3, GWD-4, ALPR-9 & VDI-4 of Hyderabad Division- Electrical Arrangements
Design, fabrication, supply, erection, testing and commissioning of mini 12 Mtrs high mast system complete with all connected accessories. The mast shall be single section, hot dip galvanized, head frame, 2 point stainless steel wire rope 5 mm dia 7/19 construction, double drum 1 winch, galvanized lantern carriage arrangement suitable for 6 luminaries symmetrically with its control gear boxes, lightning and with all connected materials. The mast shall have an integral power tool installed inside the base compartment for its operation. This includes wiring with 5 core 2.5 sq.mm PVC insulated copper cable, except those mentioned as separate item, as per the direction of engineer at site.