Fabrication Works Tenders

Supply and fixing of M.S Grills with Doors and Windows with one coat of Red oxide with Primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification.

Supplying, fabricating and fixing in position of Steel Truss of span 3m, Top, bottom and vertical member with 50 x 50 x 6mm M.S. Angle with joint plates of 16mm thick to connect with the existing column, necessary foundation bolts & nuts of required length. The rate including cost of 50 x 50 x 6mm M.S. Angle, M.S. Plates, welding rod, hire charges for welding machine, transportation charges from fabrication yard to work site, handling charges in both end for hosting, erection to the required height, fixing charges, including one coat primer and two coats of synthetic enamel paint, labour, tools, equipments, etc., complete and as directed by the departmental officers.

Supply and erection of decorative pole 5m Jaswin Causeway Midi Lighting Pole-5000mm Jaswin Causeway midi pole made of circular mild steel pipe (grade YST 210) 88.9mm Dia x 2.9mm thick with 4000mm Height. Decorative base made of Gravity Die-cast aluminium (330mm Dia x 1000mm Height). Pole section welded by certified welders using high end MIG welding processes. PDC aluminium service door 348mm height x 80mm width shall be provided with the company logo embossed on the bottom of the door and safety harness. Including the control gear tray is prewired with 2.5 Sq.mm cable, 1amp SP MCB and 32A stud type 4 way terminal block for loop-in / loop-out arrangement, 5A 2 Way terminal connector and provision for earthing. Mild steel mounting plate 280mm dia x 12mm thick Steel of grade E250 to IS 2062 : 2011 with 4 elongated holes 38 x 19 to suit M16 x 500mm bolts of grade 4.6 at PCD 200. The base plate have a cable entry hole as per the base pipe size. This mounting steel plate along with foundation bolts of suitable size to be used for ensuring firm grouting into the specially designed foundation. All dimension are within +/- 5% tolerance. Post fabrication, entire pole is shot blasted (Inhouse). The decorative pole shall be duly pre-treated externally as well as internally so that rusting should not happened. On the edges and openings the pole is duly painted by one coat of red oxide to aovide the corrosion. Externally Entire unit shall be given an extensive three Stage treatment with U.V. ray resistant PU based each primer, Zinc phosphate primer and Poly Urethane paint of approved (from department) colour. The body of the pole shall be machined and polished properly to give it a smooth surface. The coating should have a DFT of 80-90 microns.

220 KV/DD Spl type tower upto +18/25 MBE Total 602056.71 Erection of galvanised lattice steel (HT & MS) for tower superstructure complete in all respect as per IS-2062 including application of suitable paints up to bottom cross arm level. Design of tower Item- 12 with details of members drawing should be got approved from authority concern of Railway/AEGCL before fabrication and starting foundation work at site for all the location. all tower members to be tightened properly with nut & bolt and tack welding of all nuts & bolt up to the height of cross arm. S No. Item Description of Item Unit Qty Rate Amount No

Design, fabrication, supply, errection and commissioning of embedded parts (with top seal seat) consisting of sill beam, wheel tracks, seal seats, guide rails, groove lining upto top etc., with all accessories for vertical lift roller gate for canal escape / regulator including cost of all materials, machinery, labour, cutting, aligning, anchoring, welding, finishing, cleaning, applying one coat of zinc rich epoxy primer and four coats of cold applied coal tar epoxy paint complete as per specifications and approved drawings.

Design, fabrication, supply, errection and commissioning of embedded parts (with top seal seat) consisting of sill beam, wheel tracks, seal seats, guide rails, groove lining upto top etc., with all accessories for vertical lift roller gate for canal escape / regulator including cost of all materials, machinery, labour, cutting, aligning, anchoring, welding, finishing, cleaning, applying one coat of zinc rich epoxy primer and four coats of cold applied coal tar epoxy paint complete as per specifications and approved drawings.