Medical Equipment Tenders

32 Providing and fixing factory made uPVC white colour casement/ Casement cum fixed glazed door comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll formingprocess of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealent shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.Casement door with top hung ventilator with 3D and S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 64 mm, sash 67 x 110 mm & mullion 67 x 80 mm all having wall thickness of 2.3 ±. 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. sqm 4.68 4.68 0.00 0.00 0.00 0.00 0.00 0.00

3 Part – B: IPR Clause for indemnification of HAL in case of Infringement of Third Party IPR: a. HAL shall have the right to use the Supplies/Services procured under the contract that may contain any Intellectual Property/ Intellectual Property Rights. Vendor shall indemnify and protect at its own cost, HAL in respect of cost/claims/ liabilities (including attorney’s fees) arising from any violation of Intellectual Property Rights of any third party with respect to Supplies/Services provided by Vendor. If HAL or HAL’s customer/s are unable to put to use the Supplies/Services or a portion thereof as a result of violation of the Intellectual Property of any third party, Vendor shall within reasonable time at Vendor’s own cost either, i. procure for HAL and HAL’s Customer/s the right to continue using the Supply/Service or, ii. replace or modify the Supplies/Services so that it becomes non-infringing or, iii. compensate HAL the amount equivalent to the cost of supplies procured/ to be procured, development cost already paid to Vendor and damages suffered by HAL arising due to inability to put to use the supplies/ services or a portion thereof. Intellectual Property for the purpose of this clause includes inventions, discoveries and improvements; know-how, works of authorship, technical data, drawings, specifications, process information, reports and documented information; and computer software(including without limitation, source code, object code, source code listings and object code listings that would enable the software to be reproduced or recreated), topology of integrated circuits, databases or any other such results of intellectual activity.

52.iii c) Seller shall indemnify and protect at its own cost, HAL in respect of cost/ claims/ liabilities (including attorney’s fees and associated costs of legal proceedings) arising from any violation of Intellectual Property Rights of any third party with respect to supplies/ services provided by seller. If HAL or HAL’s customer/s are unable to put to use the supplies/services or a portion thereof as a result of violation of the Intellectual Property of any third party, Seller shall within reasonable time at seller’s own cost either, i. Procure for HAL and HAL’s customer/s the right to continue using the supply /service or, ii. Replace or modify the supplies/ services so that it becomes non-infringing or, iii. Compensate HAL the amount equivalent to the cost of supplies procured /to be procured, development cost already paid to seller and damages suffered by HAL arising due to inability to put to use the supplies/ services or a portion thereof.

1. Vendor Qualification Criteria (i). Criteria 1 - Experience and Past Performance a) Vendor or its/ collaborator (OEM) should have developed, supplied and installed at least one number each of Motion and Vibration System for level D Certified Full Flight simulator/Full Motion Simulator for Aircraft/Helicopter across the world in the last five years, ending 31st March 2026 and out of which b) At least 01 number of each Motion and Vibration system should be in successful operation for at least one year on the date of bid opening. To verify the compliance to the requirements mentioned at (a) and (b) above, the vendor needs to provide one of the following documents along with the bid response: i. Copy of Flight Simulator Level D Certificate for which the vendor/OEM has supplied the motion & vibration system and letter indicating the details of Year of Delivery and the Operational Status of the motion and vibration system. It is mandatory that the vendor submitted Level D Certificate indicates the vendor/OEM name against the motion and vibration system (or) ii. Valid documentary evidence viz. Purchase Order Copy & corresponding Certificate of Completion and letter indicating the details of Year of Delivery and the Operational Status of the motion and vibration system (or) iii. Letter issued by the Approved Training Organization (ATO) / Operator of the Level D Flight Simulator for which the vendor/OEM has supplied the motion & vibration system and letter indicating the details of Year of Delivery and the Operational Status of the motion and vibration system (or) iv. Any other valid document which establishes the proof that the vendor or its OEM has supplied motion & vibration system for a Level D Certified Full Flight/Motion Simulator across the world and letter indicating the details of Year of Delivery and the Operational Status of the motion and vibration system. c) The vendor, who intends to submit the response to this RFP, should have at least any one of the following experiences by themselves: i. Vendor should have developed, integrated & supplied systems/sub-systems/ simulation software for use in Training simulator for an airborne / Naval applications or Flight simulator for Aircraft/Helicopter. ii. Vendor should have developed and supplied systems for airborne applications. iii. Operation or maintenance of flight simulators. To verify the compliance to the requirements mentioned at (c), vendor shall provide the necessary documentary evidence along with the bid. d) If the vendor is having collaboration with OEM for supply of Motion and Vibration System, the OEM shall be involved during the installation, integration and testing phase along with the vendor. The bid should accompany a formal letter from the OEM of Motion and Vibration System stating the same. The formal letter shall also state that OEM will ensure quality, performance of the product, warranty for a period of 24 months and full product support for a period of 30 years.

Eicher10.90/Eicher10.75 Ventilator complete